The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-29-2012, 03:54 PM   #1
Mister-B
Account Suspended
 
Join Date: Oct 2012
Location: Salt Lake City, Utah
Posts: 3,331
How to straighten steering wheel?

My alignment is fine, but the steering wheel isn't straight.

How can I adjust it?
Posted via Mobile Device
Mister-B is offline   Reply With Quote
Old 11-29-2012, 04:18 PM   #2
GCncsuHD
Charlie Daniels w/ a Tq Wrench
 
GCncsuHD's Avatar
 
Join Date: May 2009
Location: Statesville, NC
Posts: 1,570
Re: How to straighten steering wheel?

Park the truck with the wheels straight, get under it and adjust both tie rods until it lines up your steering wheel.
__________________
ΜΟΛΩΝ ΛΑΒΕ
67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works
69 K5 Blazer-Family Beach Cruiser Project
78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s
SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s
GCncsuHD is offline   Reply With Quote
Old 11-29-2012, 04:23 PM   #3
Stocker
20' Daredevil (Ret)
 
Stocker's Avatar
 
Join Date: May 2003
Location: Jefferson State
Posts: 13,722
Re: How to straighten steering wheel?

Or just remove the steering wheel (disconnect horn first) and reinstall it in the correct position.
__________________
- Mike -

1972 K20 LWB 350/350/205

RIP El Jay
Stocker is offline   Reply With Quote
Old 11-29-2012, 04:28 PM   #4
GCncsuHD
Charlie Daniels w/ a Tq Wrench
 
GCncsuHD's Avatar
 
Join Date: May 2009
Location: Statesville, NC
Posts: 1,570
Re: How to straighten steering wheel?

Quote:
Originally Posted by Stocker View Post
Or just remove the steering wheel (disconnect horn first) and reinstall it in the correct position.
That will work as well, and may be easier, I couldn't remember if the columns had a master spline or not that only allowed the wheel to be installed in one position, so I suggested adjusting the tie rods.
__________________
ΜΟΛΩΝ ΛΑΒΕ
67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works
69 K5 Blazer-Family Beach Cruiser Project
78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s
SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s
GCncsuHD is offline   Reply With Quote
Old 11-29-2012, 05:06 PM   #5
Mister-B
Account Suspended
 
Join Date: Oct 2012
Location: Salt Lake City, Utah
Posts: 3,331
Re: How to straighten steering wheel?

Thanks guys. The steering wheel removal method sounds easiest. Is there just a nut under the horn button?
Posted via Mobile Device
Mister-B is offline   Reply With Quote
Old 11-29-2012, 05:07 PM   #6
Mister-B
Account Suspended
 
Join Date: Oct 2012
Location: Salt Lake City, Utah
Posts: 3,331
Re: How to straighten steering wheel?

Oh, and how does the horn button come off?
Posted via Mobile Device
Mister-B is offline   Reply With Quote
Old 11-29-2012, 05:15 PM   #7
Wrenchbender Ret
Registered User
 
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,229
Re: How to straighten steering wheel?

Drive it down the road & when you are going straight put a chalk mark on the strg. wheel hub & the turn switch hub. Then go back to the shop & line up the marks. Remove the strg. wheel & set it down in the straight ahead position. To pull the wheel you remove the horn cap & the contacts. You need a strg. gear puller. You the correct bolts with the puller to remove the wheel.
Note. This does not work on 73 up trucks with the key in column. These are indexed.
Wrenchbender Ret is offline   Reply With Quote
Old 11-29-2012, 05:36 PM   #8
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
Wink Re: How to straighten steering wheel?

Unplug the horn before you start!
Horn button is just clicked into place. Just pull on it it will pop off. Take the three horn screws out and get that out of the way. Then loosen the nut on the shaft. Dont take it all the way off. Then install the puller with the 2 bolts into the hub. Make sure you get them good and tight. Then start turning the puller it self, once it's tight take a hammer and smack the center of the puller and it should pop the wheel loose. the nut will keep it from coming all the way off. Take the puller bolts out and then remove nut wheel will come off in your hand.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 11-29-2012, 05:38 PM   #9
Mister-B
Account Suspended
 
Join Date: Oct 2012
Location: Salt Lake City, Utah
Posts: 3,331
Re: How to straighten steering wheel?

Quote:
Originally Posted by Wrenchbender Ret View Post
Drive it down the road & when you are going straight put a chalk mark on the strg. wheel hub & the turn switch hub. Then go back to the shop & line up the marks. Remove the strg. wheel & set it down in the straight ahead position. To pull the wheel you remove the horn cap & the contacts. You need a strg. gear puller. You the correct bolts with the puller to remove the wheel.
Note. This does not work on 73 up trucks with the key in column. These are indexed.
Thank you. I don't have that tool. Are they easy to find, and inexpensive? Makes me wonder if doing the tie rod adjustment might be easier?
Posted via Mobile Device
Mister-B is offline   Reply With Quote
Old 11-29-2012, 05:47 PM   #10
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
Thumbs up Re: How to straighten steering wheel?

They can be rented at about any parts store. U can buy one for $25.00 are so.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 11-29-2012, 06:03 PM   #11
Mister-B
Account Suspended
 
Join Date: Oct 2012
Location: Salt Lake City, Utah
Posts: 3,331
Re: How to straighten steering wheel?

Quote:
Originally Posted by Andy4639 View Post
They can be rented at about any parts store. U can buy one for $25.00 are so.
Thanks. So, how does that horn button come off a 69? Just pull on it?
Posted via Mobile Device
Mister-B is offline   Reply With Quote
Old 11-29-2012, 06:07 PM   #12
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
Talking Re: How to straighten steering wheel?

If it's factory it should just pull off. Grab it and pull.

horn button:


Steering wheel:

__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 11-29-2012, 05:50 PM   #13
SS Tim
Registered User
 
SS Tim's Avatar
 
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
Re: How to straighten steering wheel?

How do you know your alignment is OK? The steering wheel should have been set at alignment. You can have alignment issues and still go straight. Suggest you start with an inspection of the front end (bushings, ball joints, tie rods and such) then consider an alignment.
SS Tim is offline   Reply With Quote
Old 11-29-2012, 06:02 PM   #14
Mister-B
Account Suspended
 
Join Date: Oct 2012
Location: Salt Lake City, Utah
Posts: 3,331
Re: How to straighten steering wheel?

Quote:
Originally Posted by SS Tim View Post
How do you know your alignment is OK? The steering wheel should have been set at alignment. You can have alignment issues and still go straight. Suggest you start with an inspection of the front end (bushings, ball joints, tie rods and such) then consider an alignment.
Because the truck can drive in a straight line without me needing to pull the wheel to either side, but the wheel stays in a crooked position
Posted via Mobile Device
Mister-B is offline   Reply With Quote
Old 11-29-2012, 06:27 PM   #15
SS Tim
Registered User
 
SS Tim's Avatar
 
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
Re: How to straighten steering wheel?

Quote:
Originally Posted by Mister-B View Post
Because the truck can drive in a straight line without me needing to pull the wheel to either side, but the wheel stays in a crooked position
Posted via Mobile Device
That is kind of what I thought you would say. The problem is it can be off and still go straight and the off center wheel may very well indicate a home alignment "twisting 'till it goes straight".

Problem with pulling/moving the wheel is that that it "should" be lined up with the steering gear lash center. But many things could have changed the wheel, shaft and box alignment over the years.

It really boils down to making it work or being correct.
SS Tim is offline   Reply With Quote
Old 11-29-2012, 06:19 PM   #16
midniteblues
Registered User
 
midniteblues's Avatar
 
Join Date: Jul 2011
Location: strausstown pa
Posts: 3,394
Re: How to straighten steering wheel?

dude check your front tires brush your hand over them do you feel the tread wearing smoothly/ is the tread choppy? are your tires wearing on one side and not the other(inside too the outside)does your truck pull to oneside of the road when trying too go straight on a flat road?

If these check ok then pop your steering wheel off and re-center it alot of times you dont need a puller if you grab it firmly and pull it out with a rocking back and forth motion some times they come off(depending if its ever been removed before). if you wanna risk it you could hammer it off but you risk cracking or damageing the wheel I would suggest a block of softer wood or a rubber or plastic mallet. of course the real challenge is getting a swing
oviously the proper puller is the best way and andy is right alot of stores will either rent or let you borrow one

what ever you do please dont start turning you tie rods to center your wheel steering wheel

anyway it never hurts to have a alignment done but be prepared to start replaceing parts that are worn
__________________
81 camaro 355 4/spd 342 posi my first love.
67 swb step 454/4spd ott 373 posi 4/7 drop.
2000 s10 zr2 little blue truck that never gets stuck.
'74 heald super bronc vt8. tecumseh powered moon rover.
midniteblues is offline   Reply With Quote
Old 11-29-2012, 10:01 PM   #17
POS1
Registered User
 
Join Date: Jul 2011
Location: Houston, Texas
Posts: 145
Re: How to straighten steering wheel?

I agree on the alignment thing as the first course of action. If it's all good, then you can redo the position of the steering wheel.
__________________
- Brian
FleetFilter.com
1991 Chevrolet V1500 Suburban 4x4
1986 Jeep CJ7
1969 Porsche 911S Targa
POS1 is offline   Reply With Quote
Old 11-29-2012, 10:43 PM   #18
69GWC
Registered User
 
Join Date: Jun 2012
Posts: 1,089
Re: How to straighten steering wheel?

You can get it aligned for around $75 bucks and if its a good shop they can look over the front end parts for you and see if they are still good or in need of replacement.
Posted via Mobile Device
69GWC is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:21 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com