67 in the weeds! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vintage Windmills · 12-03-2012, 10:13 PM

No title parts truck. The price was well below scrap but there was a catch.... I had to take all the rubbish in the bed with it. Thought no big deal, since I had help and now my achilles is better and I can hobble around with a walking boot ok. Well, that's where the fun began. Had a friend air up the tires as best as we could (been sitting here for 10 years or so). I then hooked the winch with block and tackle to it and it started to pull my HD and trailer and this truck didn't move an inch! Come to find out there was about 3000lbs of shingles tar paper and metal in the bed. oh, and the rear wheels had sunk in from all that weight. We unloaded 1000lbs of stuff from the bed onto the trailer, and went home without the truck. Second pic is the first load of junk after I cleaned it off the flatbed, not including 300lbs of tar paper rolls, a V8 block (chrysler i think),and a waverunner lift.

jeremiah king · 12-03-2012, 10:20 PM

I have tons of stuff away that came in beds. I really hate tires. nice score.nice spare tire bed mount.

duallyjams · 12-03-2012, 10:33 PM

Haven't seen a wheel buried like that since my 4x4 days.

**leddzepp** · 12-03-2012, 10:30 PM

You got tricked

Vintage Windmills · 12-03-2012, 10:41 PM

Quote:

Originally Posted by leddzepp

You got tricked

I knew there was junk to contend with but the fact it was 3000lbs of tar paper and shingles, that was more than I was planning on

Quote:

Originally Posted by jeremiah king

I have tons of stuff away that came in beds. I really hate tires. nice score.nice spare tire bed mount.

Oh, the green one is one of my trailers. Yep, there were like 5 tires in the bed too

Now to clean out the bed. Tar paper and removed roof was all fused together into one solid glob that was too heavy to pick out as one mass yet hard to break apart. I swung by the dumpster at work and got rid of the heavy roofing stuff and now it was just manageable smaller stuff. Here is how it looked before and after getting the heavy stuff out:

Vintage Windmills · 12-03-2012, 10:33 PM

Thank you Jeremy Z for helping and lining up the deal for me. Loaded up the truck on sat with floor jack, 2 spares, 30 ton bottle jack, and more daylight then headed back. Jacked it up, put the spares under the pass side and dropped her back down. Now there was only 2000lbs left in the bed. Hooked the winch back up and now the truck would only move with the two rear tires sliding hard. Jacked it back up, confirmed it was the brakes that were locked, and then beat for 1/2 hour on the brake drum. Finally got those off and then it was a relief to see the wheels spin! She then pulled on the trailer with ease. Sure looks better on the old flatbed.

Vintage Windmills · 12-03-2012, 10:56 PM

Got it all cleaned out and down to the diamond plate bed floor. The diamond plate made it easier to scoop out, finally caught a break. Found a few hubcaps in the bed too!

**70cst** · 12-03-2012, 10:59 PM

Looks like you should recover some good parts

Vintage Windmills · 12-03-2012, 11:14 PM

Ok, now about the truck, btw- no parts for sale at this time. Its true, 6cyl plain jane, 3OTT do exist around here, but aren't too common. First truck I've ever hauled home that had a 30TT or anything lighter than a 350. This is a three option frugal farmer truck.

Now for the good: thanks to another thread on here, we're fairly certain this has a later model 4spd OD trans in it! Left fender appears to be almost perfect, can use on my 67 GMC's along with rearview mirror mount. At least one good T3, and the tailgate is dent free and nice except for one area that had dirt against it. If I can weld in a patch it will be a real nice gate. Two semi decent 70 CST hubcaps also. All in all, I am glad I picked it up. Here are even more pics

Littletony · 12-03-2012, 11:23 PM

wow another nice score Jud, what mirrors are those? The bed on this one looks like it would be better suited for trailer duty then the green one.

Shaun1162 · 12-05-2012, 11:22 PM

Wow, nice score on the 67! Looks like alot of nice parts there for sure...

Quote:

Originally Posted by Littletony

wow another nice score Jud, what mirrors are those? The bed on this one looks like it would be better suited for trailer duty then the green one.

I think those are Jr. West Coast mirrors... Had a NOS set a while ago that looked exactly like those.

Vintage Windmills · 12-03-2012, 11:31 PM

Tony, I think they are aftermarket. Seem to be thin aluminum. Yes, I was looking at the box on the trailer again and its really too nice for a trailer! Oh, and theres a D60 3.54 under there I need to come up with a better use for.

Littletony · 12-03-2012, 11:35 PM

That would be a good rear for your c20 with the 700r4. No stop buying all the nice trucks so some of us can have a shot at them. haha

**too much stuff** · 12-03-2012, 11:57 PM

Nice find! Don't forget to leave a few out there for me to find...

Vintage Windmills · 12-04-2012, 08:14 PM

Quote:

Originally Posted by too much stuff

Nice find! Don't forget to leave a few out there for me to find...

Ummm... you probably shouldn't look at my build thread then, i found some "parts" to help out with the K20 project. Also still thinking on that highlander with tilt and AC! I need you to find another 67 GMC to keep me distracted

**Dieselwrencher** · 12-04-2012, 08:35 PM

Nice score! The junk was a bear, but the trans sounds like it might be worth it by it's self.

no_rice · 12-04-2012, 12:06 AM

Damn I wish that faded white sport bumper was straight... mine is missing one lol.
Posted via Mobile Device

**MusicMan70** · 12-04-2012, 08:46 PM

That looks like it may be New process MY6 4 speed overdrive and the Hurst Shifter. Nice find if that's the case!

**MusicMan70** · 12-04-2012, 08:54 PM

Here are some pics to compare...Nice tranny to have behind the GMC V-6

Vintage Windmills · 12-05-2012, 12:51 AM

Quote:

Originally Posted by MusicMan70

Here are some pics to compare...Nice tranny to have behind the GMC V-6

That must be it. I zoomed in on the shifter knob and it is OD! I wonder if I could make this work in my 67 GMC 4x4? Would be nice with the 0.7 final drive ratio. Have you seen it done, what adapters are needed?

**MusicMan70** · 12-05-2012, 11:15 PM

I have this photo of the Shifter unit in what appears to be a 4WD application; so it has been done before by the factory.

I have put one in my 2wd Suburban using the Classic Truck's article for reference
(* the photos in the article do not jive with the captions). I have a 305 V-6.

Here are some links

http://www.classicjunkyard.com/new_process_a833.htm

http://www.customclassictrucks.com/t...n/viewall.html

nobolt · 12-06-2012, 08:51 PM

super buy. now you have to invite some friends to an all night bonfire to get rid of those shingles and tires...

midniteblues · 12-06-2012, 10:19 PM

great score on the 67,If you plan on getting it going I would plan on new shocks and springs in the rear

12-03-2012, 10:13 PM	#1
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	67 in the weeds! No title parts truck. The price was well below scrap but there was a catch.... I had to take all the rubbish in the bed with it. Thought no big deal, since I had help and now my achilles is better and I can hobble around with a walking boot ok. Well, that's where the fun began. Had a friend air up the tires as best as we could (been sitting here for 10 years or so). I then hooked the winch with block and tackle to it and it started to pull my HD and trailer and this truck didn't move an inch! Come to find out there was about 3000lbs of shingles tar paper and metal in the bed. oh, and the rear wheels had sunk in from all that weight. We unloaded 1000lbs of stuff from the bed onto the trailer, and went home without the truck. Second pic is the first load of junk after I cleaned it off the flatbed, not including 300lbs of tar paper rolls, a V8 block (chrysler i think),and a waverunner lift. Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

12-03-2012, 10:20 PM	#2
jeremiah king Registered User Join Date: Apr 2008 Location: Julian, CA Posts: 696	Re: 67 in the weeds! I have tons of stuff away that came in beds. I really hate tires. nice score.nice spare tire bed mount. __________________ Specializing in OEM 67-72 Chevy & GMC parts since 2001 1969 GMC Longhorn 396 1969 Chevy 3/4 ton LWB 396 1983 Toyota pickup 22R 2012 Toyota Scion Xb

12-03-2012, 10:33 PM	#3
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 67 in the weeds! Haven't seen a wheel buried like that since my 4x4 days. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

12-03-2012, 10:30 PM	#4
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,052	Re: 67 in the weeds! You got tricked __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

12-03-2012, 10:33 PM	#6
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 67 in the weeds! Thank you Jeremy Z for helping and lining up the deal for me. Loaded up the truck on sat with floor jack, 2 spares, 30 ton bottle jack, and more daylight then headed back. Jacked it up, put the spares under the pass side and dropped her back down. Now there was only 2000lbs left in the bed. Hooked the winch back up and now the truck would only move with the two rear tires sliding hard. Jacked it back up, confirmed it was the brakes that were locked, and then beat for 1/2 hour on the brake drum. Finally got those off and then it was a relief to see the wheels spin! She then pulled on the trailer with ease. Sure looks better on the old flatbed. Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

12-03-2012, 10:56 PM	#7
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 67 in the weeds! Got it all cleaned out and down to the diamond plate bed floor. The diamond plate made it easier to scoop out, finally caught a break. Found a few hubcaps in the bed too! Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

12-03-2012, 10:59 PM	#8
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,375	Re: 67 in the weeds! Looks like you should recover some good parts __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

12-03-2012, 11:14 PM	#9
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 67 in the weeds! Ok, now about the truck, btw- no parts for sale at this time. Its true, 6cyl plain jane, 3OTT do exist around here, but aren't too common. First truck I've ever hauled home that had a 30TT or anything lighter than a 350. This is a three option frugal farmer truck. Now for the good: thanks to another thread on here, we're fairly certain this has a later model 4spd OD trans in it! Left fender appears to be almost perfect, can use on my 67 GMC's along with rearview mirror mount. At least one good T3, and the tailgate is dent free and nice except for one area that had dirt against it. If I can weld in a patch it will be a real nice gate. Two semi decent 70 CST hubcaps also. All in all, I am glad I picked it up. Here are even more pics Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

12-03-2012, 11:23 PM	#10
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 597	Re: 67 in the weeds! wow another nice score Jud, what mirrors are those? The bed on this one looks like it would be better suited for trailer duty then the green one. __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

12-03-2012, 11:31 PM	#12
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 67 in the weeds! Tony, I think they are aftermarket. Seem to be thin aluminum. Yes, I was looking at the box on the trailer again and its really too nice for a trailer! Oh, and theres a D60 3.54 under there I need to come up with a better use for. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

12-03-2012, 11:35 PM	#13
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 597	Re: 67 in the weeds! That would be a good rear for your c20 with the 700r4. No stop buying all the nice trucks so some of us can have a shot at them. haha __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

12-03-2012, 11:57 PM	#14
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,810	Re: 67 in the weeds! Nice find! Don't forget to leave a few out there for me to find... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-04-2012, 08:35 PM	#16
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,143	Re: 67 in the weeds! Nice score! The junk was a bear, but the trans sounds like it might be worth it by it's self. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

12-04-2012, 12:06 AM	#17
no_rice Registered User Join Date: Oct 2012 Location: nevada iowa Posts: 285	Re: 67 in the weeds! Damn I wish that faded white sport bumper was straight... mine is missing one lol. Posted via Mobile Device

12-04-2012, 08:46 PM	#18
MusicMan70 Senior Member Join Date: Feb 2011 Location: Corona, CA Posts: 1,846	Re: 67 in the weeds! That looks like it may be New process MY6 4 speed overdrive and the Hurst Shifter. Nice find if that's the case! __________________ MusicMan70 1961 GMC Suburban



Register or Log In To remove these advertisements.

12-04-2012, 08:54 PM	#19
MusicMan70 Senior Member Join Date: Feb 2011 Location: Corona, CA Posts: 1,846	Re: 67 in the weeds! Here are some pics to compare...Nice tranny to have behind the GMC V-6 Attached Images __________________ MusicMan70 1961 GMC Suburban

12-05-2012, 11:15 PM	#21
MusicMan70 Senior Member Join Date: Feb 2011 Location: Corona, CA Posts: 1,846	Re: 67 in the weeds! I have this photo of the Shifter unit in what appears to be a 4WD application; so it has been done before by the factory. I have put one in my 2wd Suburban using the Classic Truck's article for reference (* the photos in the article do not jive with the captions). I have a 305 V-6. Here are some links http://www.classicjunkyard.com/new_process_a833.htm http://www.customclassictrucks.com/t...n/viewall.html Attached Images __________________ MusicMan70 1961 GMC Suburban

12-06-2012, 08:51 PM	#22
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: 67 in the weeds! super buy. now you have to invite some friends to an all night bonfire to get rid of those shingles and tires... __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

12-06-2012, 10:19 PM	#23
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: 67 in the weeds! great score on the 67,If you plan on getting it going I would plan on new shocks and springs in the rear __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.

Register or Log In To remove these advertisements.