Rear motor mount question?

[dtkarst]

I am trying to order some transmission mounts for my 65 with a crat motor and a standard 4 speed from the factory and had a question..I am replacing the ounts because it was in a wreck and i am doing a frame swap. The bellhousing was broken where it mounts to the cross member and was wondering where i get the mounts for the bellhousing? Its on both sides of the bellhousing where a bolt goes through and hada mount. any help would be great thanks

[Big Fenders]

Can you forget about the bell housing mounts and just use the side motor mounts and a cross member mount for the transmission?
Tha't what I've done on a few projects.
Bob

[padresag]

Originally Posted by Big Fenders

Can you forget about the bell housing mounts and just use the side motor mounts and a cross member mount for the transmission?
Tha't what I've done on a few projects.
Bob

why go through that trouble when you don't have to?
ron

[TBONE1964]

http://www.lmctruck.com/icatalog/cbe/full.aspx?Page=31

I believe they are called rear engine mounts. You may be able to order these from a parts store like NAPA. I attached a link with a photo if that helps you.

Good Luck

[luvbowties]

Originally Posted by dtkarst

I am trying to order some transmission mounts for my 65 with a crat motor and a standard 4 speed from the factory and had a question..I am replacing the ounts because it was in a wreck and i am doing a frame swap. The bellhousing was broken where it mounts to the cross member and was wondering where i get the mounts for the bellhousing? Its on both sides of the bellhousing where a bolt goes through and hada mount. any help would be great thanks

Like Tbone said, Napa, Advance A/P, AutoZone, O'reilly's, Rock Auto, CarQuest, etc--get 'em local--save shipping.
sam