NY WTB 6cyl throttle linkage for TH350 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blkcorvair · 01-04-2013, 07:26 PM

looking for this setup in the borrowed picture below. Anyone have something like that? or something that does the same thing? looks like there was a few variations of this linkage looking through posts.

blkcorvair · 01-05-2013, 09:20 AM

ttt

blkcorvair · 01-05-2013, 07:37 PM

ttt

blkcorvair · 01-06-2013, 10:15 AM

ttt

blkcorvair · 01-07-2013, 11:03 AM

Ttt

ls1nova71 · 01-07-2013, 12:02 PM

That pic looks familiar.

But to make sure, you need a 350 turbo linkage for a 69-70 with the throttle rod and not a 71-72 with a cable, right?

blkcorvair · 01-07-2013, 12:04 PM

Quote:

Originally Posted by ls1nova71

That pic looks familiar.

But to make sure, you need a 350 turbo linkage for a 69-70 with the throttle rod and not a 71-72 with a cable, right?

Im hoping to find one with the linkage.

ls1nova71 · 01-07-2013, 12:11 PM

That's what I thought, just making sure. I have some for a cable. The one in your pic is one I sold last year, and the only one I have ever personally seen and I've been around these trucks for well over 20 years. It's not a common set up at all. Good luck with your search.

blkcorvair · 01-07-2013, 01:18 PM

Quote:

Originally Posted by ls1nova71

That's what I thought, just making sure. I have some for a cable. The one in your pic is one I sold last year, and the only one I have ever personally seen and I've been around these trucks for well over 20 years. It's not a common set up at all. Good luck with your search.

Do you have any pics of that type of setup? I may need to convert to the cable setup in the end.

blkcorvair · 01-07-2013, 07:40 PM

I can indeed modify and utilize a setup like this that is meant for cables if someone does have one they can part with. Thanks!

ls1nova71 · 01-08-2013, 12:57 AM

That pic looks familiar too! That set up was off a '73-4 Nova. the set I have now is a later set, Think like a '75 or so Camaro. The throttle cable doesn't pop on the little ball on the linkage, it is the kind that takes a clip to hold it on. But If you're going to modify it anyway, shouldn't be hard to change. I'll get you some pics in the morning.

ls1nova71 · 01-08-2013, 11:43 AM

Here's what I have at the moment. The throttle lever part has 2 levers on top, 1 is for a cruise control cable. The throttle cable bracket also has the extra cable bracket bolted to it with 2 screws for the cruise control cable, it comes off. You would have to cut the extra lever off the throttle part.

**NGN** · 01-11-2013, 12:23 AM

Are the pic's in #12 off a 71-72 ? I to would like to know more about this. Thanks and good like with your find.
Nick

**NGN** · 01-11-2013, 12:24 AM

Are the pic's in #12 off a 71-72 ? I to would like to know more about this. Thanks and good luck with your find.
Nick

ls1nova71 · 01-11-2013, 01:03 AM

No, they're off of a 75ish Camaro. They are sold to blkcorvair.
Posted via Mobile Device

**NGN** · 01-11-2013, 02:47 PM

Gotcha and thanks
Nick

01-05-2013, 09:20 AM	#2
blkcorvair Registered User Join Date: May 2011 Location: Long Island NY Posts: 787	Re: WTB 6cyl throttle linkage for TH350 ttt

01-05-2013, 07:37 PM	#3
blkcorvair Registered User Join Date: May 2011 Location: Long Island NY Posts: 787	Re: WTB 6cyl throttle linkage for TH350 ttt

01-06-2013, 10:15 AM	#4
blkcorvair Registered User Join Date: May 2011 Location: Long Island NY Posts: 787	Re: WTB 6cyl throttle linkage for TH350 ttt

01-07-2013, 11:03 AM	#5
blkcorvair Registered User Join Date: May 2011 Location: Long Island NY Posts: 787	Re: WTB 6cyl throttle linkage for TH350 Ttt

01-07-2013, 12:02 PM	#6
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: WTB 6cyl throttle linkage for TH350 That pic looks familiar. But to make sure, you need a 350 turbo linkage for a 69-70 with the throttle rod and not a 71-72 with a cable, right? __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

01-04-2013, 07:26 PM	#1
blkcorvair Registered User Join Date: May 2011 Location: Long Island NY Posts: 787	WTB 6cyl throttle linkage for TH350 looking for this setup in the borrowed picture below. Anyone have something like that? or something that does the same thing? looks like there was a few variations of this linkage looking through posts. Last edited by blkcorvair; 01-04-2013 at 09:01 PM.

01-07-2013, 12:11 PM	#8
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: WTB 6cyl throttle linkage for TH350 That's what I thought, just making sure. I have some for a cable. The one in your pic is one I sold last year, and the only one I have ever personally seen and I've been around these trucks for well over 20 years. It's not a common set up at all. Good luck with your search. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

01-07-2013, 07:40 PM	#10
blkcorvair Registered User Join Date: May 2011 Location: Long Island NY Posts: 787	Re: WTB 6cyl throttle linkage for TH350 I can indeed modify and utilize a setup like this that is meant for cables if someone does have one they can part with. Thanks!

01-08-2013, 12:57 AM	#11
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: WTB 6cyl throttle linkage for TH350 That pic looks familiar too! That set up was off a '73-4 Nova. the set I have now is a later set, Think like a '75 or so Camaro. The throttle cable doesn't pop on the little ball on the linkage, it is the kind that takes a clip to hold it on. But If you're going to modify it anyway, shouldn't be hard to change. I'll get you some pics in the morning. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

01-08-2013, 11:43 AM	#12
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: WTB 6cyl throttle linkage for TH350 Here's what I have at the moment. The throttle lever part has 2 levers on top, 1 is for a cruise control cable. The throttle cable bracket also has the extra cable bracket bolted to it with 2 screws for the cruise control cable, it comes off. You would have to cut the extra lever off the throttle part. Attached Images __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

01-11-2013, 12:23 AM	#13
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 838	Re: WTB 6cyl throttle linkage for TH350 Are the pic's in #12 off a 71-72 ? I to would like to know more about this. Thanks and good like with your find. Nick

01-11-2013, 12:24 AM	#14
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 838	Re: WTB 6cyl throttle linkage for TH350 Are the pic's in #12 off a 71-72 ? I to would like to know more about this. Thanks and good luck with your find. Nick

01-11-2013, 01:03 AM	#15
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: WTB 6cyl throttle linkage for TH350 No, they're off of a 75ish Camaro. They are sold to blkcorvair. Posted via Mobile Device __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

01-11-2013, 02:47 PM	#16
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 838	Re: WTB 6cyl throttle linkage for TH350 Gotcha and thanks Nick



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.