who makes the best aluminum rear mount fuel tank? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

travz500 · 01-05-2013, 03:03 AM

OK I looked and searched and can not find what I am looking for seen one I like but forgot to write down who made it I am putting the tank in the back and want to know who makes the best aluminum tank for between frame rails? I also want 8an fittings in and out of tank so future fuel usage and want one with a sender already in tank for original 0-30 ohm gauges. Pictures would even be better I dont really like the jegs tanks I want one that fits good heigth is not a issue its 4x4 and has a 8" lift on it

RockTonka · 01-05-2013, 05:14 AM

check out www.boydwelding.com

travz500 · 01-05-2013, 11:39 AM

hey did that fit in your truck good? didnt see one on there site for our trucks but I like how it looks mind if ask how much it cost?

**Clyde65** · 01-05-2013, 12:16 PM

Boyd's! I fit it in my truck, no issues.
Posted via Mobile Device

wayno · 01-05-2013, 12:39 PM

I also want to do this - need the leg room in the cab. Looks like this doesn't come with sending units etc - where are you guys picking up the extra pieces to the puzzle? Thanks in advance.

travz500 · 01-05-2013, 02:43 PM

Quote:

Originally Posted by wayno

I also want to do this - need the leg room in the cab. Looks like this doesn't come with sending units etc - where are you guys picking up the extra pieces to the puzzle? Thanks in advance.

took the words out of my mouth buddy the only senders they show are 0-90 and we need 0-30 ohm i dont even see on there site where the 60-66 trucks are listed

**Clyde65** · 01-05-2013, 06:02 PM

They will supply them, tell them what you have. Mine came with roll over valve, sender and cap.
Posted via Mobile Device

Shooters_7 · 01-05-2013, 07:15 PM

IF you need a sender you can also contact Classic Instruments as this is where Boyd gets his stuff from. The tank fits awesome and I'm putting a second one in my daily driver now since I'm rebuilding the motor.

gimmy 64 · 01-05-2013, 07:21 PM

the tanks were designed for the 67-72 trucks but fit ours as well. they also give members a discount . best price out there.

**Captainfab** · 01-06-2013, 01:47 AM

If you need something different than the standard offering, I believe Dave Boyd can accomodate you. Give him a call or PM him here on the forum.....he is a forum Vendor.

http://www.67-72chevytrucks.com/vboa...d.php?t=362307

gixxer711 · 01-06-2013, 03:54 PM

anyone have any installed pics? how low does it hang, as i intend to lay frame and dont want it to hit the ground. my buddy bought the blazer tank and it hangs way too low.
Posted via Mobile Device

Pro Performance · 01-09-2013, 12:43 PM

If you are laying frame and raising the bed floor, you can mount the tank on top of the frame rails for extra clearance.

wayno · 01-09-2013, 01:20 PM

Pro-
Can you PM me a quote for the Porterbuilt Stage 2 Deluxe rear and a boyd tank with roll over valve (not sure if you can get a 30 ohm sending unit) - for my 1964 short bed step side shipped to 08085? Are there any known issues with clearances on the short bed with this tank? Thanks in advance.

-W

**tazattitude** · 01-09-2013, 03:56 PM

CPP has a tank that fits between the rails.
The stock filler it offset. I relocated the filler in the center

Pro Performance · 01-09-2013, 04:35 PM

Quote:

Originally Posted by wayno

Pro-
Can you PM me a quote for the Porterbuilt Stage 2 Deluxe rear and a boyd tank with roll over valve (not sure if you can get a 30 ohm sending unit) - for my 1964 short bed step side shipped to 08085? Are there any known issues with clearances on the short bed with this tank? Thanks in advance.

-W

PM Sent. The tank will work with the short bed.

- Travis

travz500 · 01-09-2013, 04:50 PM

hey Pro could you also get me a quote on both tanks with 0-30 ohm senders and would prefer 1/2 outlet for fuel lines thanks and shipping to 66070

Pro Performance · 01-09-2013, 04:56 PM

PM Sent, thanks.

**slepysal** · 01-09-2013, 06:59 PM

any thing for a 60? Pm sent

travz500 · 01-14-2013, 08:50 PM

Quote:

Originally Posted by Pro Performance

PM Sent, thanks.

Hey Travis thanks you answered alot of questions and didnt have a problem with customizing my order so I ordered 2 tanks and 2 4 row aluminum raditors also thanks alot very nice guy to work worth thanks again
Travis

Pro Performance · 01-09-2013, 07:11 PM

Pm Returned. Can do a custom tank or maybe adapt the Boyd tank to your frame with some brackets. I sent you measurements also.

- Travis

travz500 · 01-10-2013, 12:13 AM

how did you all hook up the fill hose to the truck? any pics of how you did this? or how bout pics of the bed fill pics I am thinking of the bed fill style so dont have to cut something out on the side but would like to see how you did it

Pro Performance · 01-15-2013, 12:21 PM

No problem at all.... glad to get you all set up and appreciate the business. I will keep you posted when they ship out.

Travis

austin60c10 · 01-15-2013, 01:56 PM

here are the dimensions for my 1960 tank, it fits like a glove hope they help.

A

raiderfan34 · 01-18-2013, 11:46 PM

Got mine at Classic Performance Parts and had no issues.

01-05-2013, 03:03 AM	#1
travz500 Registered User Join Date: Sep 2012 Location: ozawkie ks Posts: 945	who makes the best aluminum rear mount fuel tank? OK I looked and searched and can not find what I am looking for seen one I like but forgot to write down who made it I am putting the tank in the back and want to know who makes the best aluminum tank for between frame rails? I also want 8an fittings in and out of tank so future fuel usage and want one with a sender already in tank for original 0-30 ohm gauges. Pictures would even be better I dont really like the jegs tanks I want one that fits good heigth is not a issue its 4x4 and has a 8" lift on it

01-05-2013, 05:14 AM	#2
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,524	Re: who makes the best aluminum rear mount fuel tank? check out www.boydwelding.com Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

01-05-2013, 11:39 AM	#3
travz500 Registered User Join Date: Sep 2012 Location: ozawkie ks Posts: 945	Re: who makes the best aluminum rear mount fuel tank? hey did that fit in your truck good? didnt see one on there site for our trucks but I like how it looks mind if ask how much it cost?

01-05-2013, 12:16 PM	#4
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,545	Re: who makes the best aluminum rear mount fuel tank? Boyd's! I fit it in my truck, no issues. Posted via Mobile Device __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

01-05-2013, 12:39 PM	#5
wayno Registered User Join Date: Dec 2012 Location: Woolwich Twp, NJ Posts: 445	Re: who makes the best aluminum rear mount fuel tank? I also want to do this - need the leg room in the cab. Looks like this doesn't come with sending units etc - where are you guys picking up the extra pieces to the puzzle? Thanks in advance.

01-05-2013, 06:02 PM	#7
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,545	Re: who makes the best aluminum rear mount fuel tank? They will supply them, tell them what you have. Mine came with roll over valve, sender and cap. Posted via Mobile Device __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

01-05-2013, 07:15 PM	#8
Shooters_7 Registered User Join Date: Apr 2011 Location: Great State of Texas Posts: 410	Re: who makes the best aluminum rear mount fuel tank? IF you need a sender you can also contact Classic Instruments as this is where Boyd gets his stuff from. The tank fits awesome and I'm putting a second one in my daily driver now since I'm rebuilding the motor. __________________ Conner 1965 Build: http://67-72chevytrucks.com/vboard/s...d.php?t=535078

01-05-2013, 07:21 PM	#9
gimmy 64 Registered User Join Date: Sep 2009 Location: menifee california Posts: 788	Re: who makes the best aluminum rear mount fuel tank? the tanks were designed for the 67-72 trucks but fit ours as well. they also give members a discount . best price out there.

01-06-2013, 01:47 AM	#10
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: who makes the best aluminum rear mount fuel tank? If you need something different than the standard offering, I believe Dave Boyd can accomodate you. Give him a call or PM him here on the forum.....he is a forum Vendor. http://www.67-72chevytrucks.com/vboa...d.php?t=362307 __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-06-2013, 03:54 PM	#11
gixxer711 Registered User Join Date: May 2012 Location: Cypress, TX Posts: 163	Re: who makes the best aluminum rear mount fuel tank? anyone have any installed pics? how low does it hang, as i intend to lay frame and dont want it to hit the ground. my buddy bought the blazer tank and it hangs way too low. Posted via Mobile Device

01-09-2013, 12:43 PM	#12
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: who makes the best aluminum rear mount fuel tank? If you are laying frame and raising the bed floor, you can mount the tank on top of the frame rails for extra clearance. Attached Images

01-09-2013, 01:20 PM	#13
wayno Registered User Join Date: Dec 2012 Location: Woolwich Twp, NJ Posts: 445	Re: who makes the best aluminum rear mount fuel tank? Pro- Can you PM me a quote for the Porterbuilt Stage 2 Deluxe rear and a boyd tank with roll over valve (not sure if you can get a 30 ohm sending unit) - for my 1964 short bed step side shipped to 08085? Are there any known issues with clearances on the short bed with this tank? Thanks in advance. -W

01-09-2013, 03:56 PM	#14
tazattitude Senior Member Join Date: Oct 2010 Location: Largo, FL Posts: 532	Re: who makes the best aluminum rear mount fuel tank? CPP has a tank that fits between the rails. The stock filler it offset. I relocated the filler in the center __________________ TAZ BUILDS 1966 GMC Suburban 1963 GMC Suburban Patina frame-on FOR Sale 1966 C10 Short Bed (2010-11) Monthly Updates 2015 C10 Pics with my '72 Montego GT 429/521 build 1963 Pro Street C10 back halved. Frame off I did back in 1990 Pics / Video

01-09-2013, 04:50 PM	#16
travz500 Registered User Join Date: Sep 2012 Location: ozawkie ks Posts: 945	Re: who makes the best aluminum rear mount fuel tank? hey Pro could you also get me a quote on both tanks with 0-30 ohm senders and would prefer 1/2 outlet for fuel lines thanks and shipping to 66070

01-09-2013, 04:56 PM	#17
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: who makes the best aluminum rear mount fuel tank? PM Sent, thanks.



Register or Log In To remove these advertisements.

01-09-2013, 06:59 PM	#18
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: who makes the best aluminum rear mount fuel tank? any thing for a 60? Pm sent __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

01-09-2013, 07:11 PM	#20
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: who makes the best aluminum rear mount fuel tank? Pm Returned. Can do a custom tank or maybe adapt the Boyd tank to your frame with some brackets. I sent you measurements also. - Travis

01-10-2013, 12:13 AM	#21
travz500 Registered User Join Date: Sep 2012 Location: ozawkie ks Posts: 945	Re: who makes the best aluminum rear mount fuel tank? how did you all hook up the fill hose to the truck? any pics of how you did this? or how bout pics of the bed fill pics I am thinking of the bed fill style so dont have to cut something out on the side but would like to see how you did it

01-15-2013, 12:21 PM	#22
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: who makes the best aluminum rear mount fuel tank? No problem at all.... glad to get you all set up and appreciate the business. I will keep you posted when they ship out. Travis

01-15-2013, 01:56 PM	#23
austin60c10 Registered User Join Date: Jan 2012 Location: Manhattan Ks Posts: 88	Re: who makes the best aluminum rear mount fuel tank? here are the dimensions for my 1960 tank, it fits like a glove hope they help. A Attached Images __________________ Link to my 60 http://67-72chevytrucks.com/vboard/s...d.php?t=537517

01-18-2013, 11:46 PM	#24
raiderfan34 Registered User Join Date: May 2011 Location: Spencer, TN Posts: 18	Re: who makes the best aluminum rear mount fuel tank? Got mine at Classic Performance Parts and had no issues. Attached Images

Register or Log In To remove these advertisements.