TX WTB:'71 drop spindles and 3" rear drop springs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JonFrankMc · 01-05-2013, 06:26 PM

I am going to give my truck a subtle change. Before I purchase spindles and springs from POL or a board sponsor I am going to see if anyone has 2.5-3" drop spindles and/or 3" drop springs that they used for mockup or gentle use that they want to move.

If anyone has any please post in thread or send a PM.

Thanks!
Jon

JonFrankMc · 01-06-2013, 12:43 PM

Bump
Posted via Mobile Device

JonFrankMc · 01-07-2013, 10:01 PM

anyone?

**72k5zl1** · 01-07-2013, 10:35 PM

will look tomorrow. have a set with a couple hundred miles on them. truck i bought end of last year.

JonFrankMc · 01-07-2013, 11:06 PM

Thanks 72k5zl1, I look forward to hearing from you. I need some parts!

**72k5zl1** · 01-08-2013, 12:14 PM

i have a complete set. 5 lug spindles, springs, rotors and calipers. its all new. check out angelo in the build threads. that is the truck it is off.

**72k5zl1** · 01-08-2013, 02:50 PM

give me a call if you want 802-375-5751 thanks, glen

Dano69c10 · 01-08-2013, 06:31 PM

I have cpp 3" rear drop springs (200 miles on them). $40 plus shipping if you're interested.
Dano

**72k5zl1** · 01-08-2013, 07:36 PM

here's some pics. it is all new. there is a little surface scale on the rotor from sitting in the garage. springs are powder coated black and have the cpp # on them. the spindles have a gloss cast iron gray on them. also have shocks to match. i would rather sell as a set.$400+ shipping????

LDO · 01-08-2013, 08:48 PM

What is the lug pattern?

**72k5zl1** · 01-08-2013, 08:53 PM

5on5"

**bcnya2** · 01-08-2013, 09:38 PM

hello........this is all for the front correct? Is it probably 2-2 1/2" spindle with 2" coil for total 4-4 1/2"?

thanks,
Greg

JonFrankMc · 01-08-2013, 09:47 PM

thanks 725kzl1, I'm not needing an assembly, just spindles. I just bought some from another board member. Thanks and good luck, feel free to answer these guys in this thread so hopefully you can make a deal. Again, thanks.

Dano69c10, thanks, PM incoming!

**michael bustamante** · 01-09-2013, 11:44 AM

I have a like new pair of jeep rear springs that fit our trucks great and drop the truck about 4". No heavy hauling though. 50. Plus ship.
Posted via Mobile Device

JonFrankMc · 01-09-2013, 11:51 AM

Thanks Michael, this truck will still haul loads thus the very conservative drop. I think I have a line on 3" springs. Just waiting on a response.
Posted via Mobile Device

Dano69c10 · 01-09-2013, 05:21 PM

Pics of rear 3" (cpp) springs; $40 + Shipping.

JonFrankMc · 01-12-2013, 12:56 PM

Dano, I'll take the springs. PM sent for a shipped price.

JonFrankMc · 01-17-2013, 12:42 AM

I'm still looking for a set of rear 3" drop springs.

**bcnya2** · 01-17-2013, 12:52 AM

Entertain selling the drop spindles? If so, how much shipped to 21776. If not, I understand.

Thanks,
Greg

**PICKMUP** · 01-17-2013, 03:15 PM

I have a pair of new CPP/Western USA spindles (use 73+ BJs & Tie rod ends for 63-72): $200 + shipping.

01-05-2013, 06:26 PM	#1
JonFrankMc Registered User Join Date: Mar 2010 Location: Midlothian, Texas Posts: 193	WTB:'71 drop spindles and 3" rear drop springs I am going to give my truck a subtle change. Before I purchase spindles and springs from POL or a board sponsor I am going to see if anyone has 2.5-3" drop spindles and/or 3" drop springs that they used for mockup or gentle use that they want to move. If anyone has any please post in thread or send a PM. Thanks! Jon

01-06-2013, 12:43 PM	#2
JonFrankMc Registered User Join Date: Mar 2010 Location: Midlothian, Texas Posts: 193	Re: WTB:'71 drop spindles and 3" rear drop springs Bump Posted via Mobile Device

01-07-2013, 10:01 PM	#3
JonFrankMc Registered User Join Date: Mar 2010 Location: Midlothian, Texas Posts: 193	Re: WTB:'71 drop spindles and 3" rear drop springs anyone?

01-07-2013, 10:35 PM	#4
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,626	Re: WTB:'71 drop spindles and 3" rear drop springs will look tomorrow. have a set with a couple hundred miles on them. truck i bought end of last year. __________________ website https://www.villagegarage.com/ truck guy in the whiskey world https://www.instagram.com/c10glen/?hl=en https://www.hemmings.com/stories/car...e-perfect-day/

01-07-2013, 11:06 PM	#5
JonFrankMc Registered User Join Date: Mar 2010 Location: Midlothian, Texas Posts: 193	Re: WTB:'71 drop spindles and 3" rear drop springs Thanks 72k5zl1, I look forward to hearing from you. I need some parts!

01-08-2013, 12:14 PM	#6
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,626	Re: WTB:'71 drop spindles and 3" rear drop springs i have a complete set. 5 lug spindles, springs, rotors and calipers. its all new. check out angelo in the build threads. that is the truck it is off. __________________ website https://www.villagegarage.com/ truck guy in the whiskey world https://www.instagram.com/c10glen/?hl=en https://www.hemmings.com/stories/car...e-perfect-day/

01-08-2013, 02:50 PM	#7
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,626	Re: WTB:'71 drop spindles and 3" rear drop springs give me a call if you want 802-375-5751 thanks, glen __________________ website https://www.villagegarage.com/ truck guy in the whiskey world https://www.instagram.com/c10glen/?hl=en https://www.hemmings.com/stories/car...e-perfect-day/

01-08-2013, 06:31 PM	#8
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: WTB:'71 drop spindles and 3" rear drop springs I have cpp 3" rear drop springs (200 miles on them). $40 plus shipping if you're interested. Dano __________________ '69 Fleet It ain't yours, if you didn't build it!

01-08-2013, 07:36 PM	#9
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,626	Re: WTB:'71 drop spindles and 3" rear drop springs here's some pics. it is all new. there is a little surface scale on the rotor from sitting in the garage. springs are powder coated black and have the cpp # on them. the spindles have a gloss cast iron gray on them. also have shocks to match. i would rather sell as a set.$400+ shipping???? Attached Images __________________ website https://www.villagegarage.com/ truck guy in the whiskey world https://www.instagram.com/c10glen/?hl=en https://www.hemmings.com/stories/car...e-perfect-day/

01-08-2013, 08:48 PM	#10
LDO Registered User Join Date: Feb 2011 Location: Senatobia, MS Posts: 1,297	Re: WTB:'71 drop spindles and 3" rear drop springs What is the lug pattern? __________________ Once a Marine, always a Marine! My (Her) 57 Build "Beverly" My 66 Build "Betty" My 85 C10 "Old Blue" Help Me Find "Old Blue" OLD BLUE PART II

01-08-2013, 08:53 PM	#11
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,626	Re: WTB:'71 drop spindles and 3" rear drop springs 5on5" __________________ website https://www.villagegarage.com/ truck guy in the whiskey world https://www.instagram.com/c10glen/?hl=en https://www.hemmings.com/stories/car...e-perfect-day/

01-08-2013, 09:38 PM	#12
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: WTB:'71 drop spindles and 3" rear drop springs hello........this is all for the front correct? Is it probably 2-2 1/2" spindle with 2" coil for total 4-4 1/2"? thanks, Greg __________________ 72 Cheyenne Super 350 Holley EFI/700R4 67 Camaro SS/RS 68 Corvette 427 Tri-power 4-speed convertible 55 Chevy Belair Hardtop

01-08-2013, 09:47 PM	#13
JonFrankMc Registered User Join Date: Mar 2010 Location: Midlothian, Texas Posts: 193	Re: WTB:'71 drop spindles and 3" rear drop springs thanks 725kzl1, I'm not needing an assembly, just spindles. I just bought some from another board member. Thanks and good luck, feel free to answer these guys in this thread so hopefully you can make a deal. Again, thanks. Dano69c10, thanks, PM incoming!

01-09-2013, 11:44 AM	#14
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: WTB:'71 drop spindles and 3" rear drop springs I have a like new pair of jeep rear springs that fit our trucks great and drop the truck about 4". No heavy hauling though. 50. Plus ship. Posted via Mobile Device __________________ 1967custom

01-09-2013, 11:51 AM	#15
JonFrankMc Registered User Join Date: Mar 2010 Location: Midlothian, Texas Posts: 193	Re: WTB:'71 drop spindles and 3" rear drop springs Thanks Michael, this truck will still haul loads thus the very conservative drop. I think I have a line on 3" springs. Just waiting on a response. Posted via Mobile Device



Register or Log In To remove these advertisements.

01-09-2013, 05:21 PM	#16
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: WTB:'71 drop spindles and 3" rear drop springs Pics of rear 3" (cpp) springs; $40 + Shipping. __________________ '69 Fleet It ain't yours, if you didn't build it!

01-12-2013, 12:56 PM	#17
JonFrankMc Registered User Join Date: Mar 2010 Location: Midlothian, Texas Posts: 193	Re: WTB:'71 drop spindles and 3" rear drop springs Dano, I'll take the springs. PM sent for a shipped price.

01-17-2013, 12:42 AM	#18
JonFrankMc Registered User Join Date: Mar 2010 Location: Midlothian, Texas Posts: 193	Re: WTB:'71 drop spindles and 3" rear drop springs I'm still looking for a set of rear 3" drop springs.

01-17-2013, 12:52 AM	#19
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: WTB:'71 drop spindles and 3" rear drop springs Entertain selling the drop spindles? If so, how much shipped to 21776. If not, I understand. Thanks, Greg __________________ 72 Cheyenne Super 350 Holley EFI/700R4 67 Camaro SS/RS 68 Corvette 427 Tri-power 4-speed convertible 55 Chevy Belair Hardtop

01-17-2013, 03:15 PM	#20
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: WTB:'71 drop spindles and 3" rear drop springs I have a pair of new CPP/Western USA spindles (use 73+ BJs & Tie rod ends for 63-72): $200 + shipping. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

Register or Log In To remove these advertisements.