1966 SBFS project low and go

[wutnxt]

Most of you that have seen my threads know i have what i refer to as the " field of dreams" in my backyard. That is the name i have given to the fleet of rusting project trucks sitting in my field. What I wanted for my next build is a porterbuilt front end , a big C notch in the rear,full air ride, some patina, fresh cab paint,pounding stereo,air conditioning,Chrome bumpers front and rear and fresh wiring. So i went into the field picked a frame out , then a cab that is 100% mint and lastly the best short box fleetside I had. This is were things take a turn.....I have several projects on the go now that i wanted to take a break from and was just going to start wih some mindless tear down and getting things ready in the line but not really get into it. Then....yes there is more...I saw a members truck for sale on the for sale page that was started already, normaly not my thing to want a truck thats half finished because i have a few of them now.....lol. But i made contact we talked priced but couldn't come to terms....you know how that goes. Then a week or so later it was on ebay and the bidding started....and no i didn't buy it there either. I was the high bidder but below the reserve that was placed on it. I was contacted by the seller again and I passed on it yet again. Since the truck was built it's had atleast 2 maybe 3 owners and never put back together or finished. After a while I ended up cashing up for the truck just because I already almosted owned in 3 times already and someone needed to finish this truck.

[wutnxt]

The truck has had some good work done to it....and there is some stuff that just doesn't work for me. Plus i still had my original build ideas I wanted from a scratch built truck.

[wutnxt]

Some of the good..:
-It already has a porterbuilt front end in it with power rack and disc brakes
-It already has a Big C notch
-Both look good and are installed as far as i can see well
-The air bags look good
-Tires and wheels look great ....not sure if i will switch them out yet

Parts...
-Has as extra all the tubular A arms and hood hinges all porterbuilt


Body
-The cab is in good shape
-The box sides are in awesome shape
-The bumpers are in great shape
-No inner fenders....

The not so good
- Both doors aren't great
-The wiring is started and will need to be taken out and started over
-The brake lines
-Fuel lines
- The bed floor boards...not my thing
-The rear tubs .......not my thing
-The bed frame work and steel....all needs to be taken out and replaced from scratch
-Air system

[wutnxt]

So i startd with the rear bed it just wasn't my thing and I wanted to see what was under it......

[daverod]

So start cutting. Got to watch the show. Nice start.

[wutnxt]

Originally Posted by daverod

So start cutting. Got to watch the show. Nice start.

Oh i have.....

[wutnxt]

So i ripped it apart......the Left rear tub is what was in it.....Right rear tub is the direction I am going

[wutnxt]

another view

[wutnxt]

I just like the way the factory tubs look.....even if you have to cut them,stretch them or add to them. I guess it's one of my things as my kids would say

[wutnxt]

No the injection set up wasn't mine and it's not going into it.......because i knew that was the next question

[wutnxt]

Did i metion there is no engine and tranny ......just a big hole ?.......In fact I am having some faith that a engine/tranny and driveshaft have been in the truck. Because when it's bagged all the way down I look at the rear end.....then i look at the bottom of the cab and say to myself......Gee that looks close I wonder if it clears. Also shows the air set up....and where it is....

[wutnxt]

I didn't want the rounded out inners and wanted something differnt and more 60's will cleaner lines and not the long arcs.....So came up with a few ideas made some templates and i have i think what i want and now it's on to that....

[wutnxt]

I bit the bullet on the doors......I have a set of brand new doors sitting in my shop ....and a fixed set ready to go .....and after all that i decided to fix the old ones from the truck to keep as much of the paint as close as i can....granted it's not all original i went that direction anyway....So peeled them off and cut the bottoms and am in repair mode with them now....like i said i want to bang this project out and get it on the road for the spring. Drive season is short enough that i don't want to spend it working on trucks when i should be driving them.....a lesson learned from last year....lol

[chevyrestoguy]

Dude, you're a maniac!

This truck is definitely in the right hands, and it's going to be killer. I remember this truck a while back on this site. I remember it originally had a small block in it and the guy lived in Arizona(?). Then, I think it got sold to someone who was going to put an LS motor in it?

Either way, I have always liked the truck. I'm glad you wound up with it.

[daverod]

It would be great to see the "old" build. Can't wait to see what happens next.

[wutnxt]

Originally Posted by daverod

It would be great to see the "old" build. Can't wait to see what happens next.

Thanks....it's a day by day right now as fast as i can.....

[wutnxt]

Originally Posted by chevyrestoguy

Dude, you're a maniac!

This truck is definitely in the right hands, and it's going to be killer. I remember this truck a while back on this site. I remember it originally had a small block in it and the guy lived in Arizona(?). Then, I think it got sold to someone who was going to put an LS motor in it?

Either way, I have always liked the truck. I'm glad you wound up with it.

Ya your right.....and he had the LS bolted into it......then he sold it to another guy.....who sold the LS out of it ......then i ended up buying the truck. Thanks man...I hope i can do the rest of it justice

[Desert.Chevy]

Good looking truck, interested to see what your going to do with the bed.
Posted via Mobile Device

[Dinos63]

randy randy randy duude you are the man!!

[wutnxt]

Originally Posted by Dinos63

randy randy randy duude you are the man!!

No dude your the man.....but i do the best i can....lmao ...

[Lolyin58]

Very nice Randy. I will be watching this one too!

[wutnxt]

Originally Posted by Lolyin58

Very nice Randy. I will be watching this one too!

Thanks......and welcome to the page

[wutnxt]

Well i found some aluminum heads...some valves...some roller rockers....and another cross ram and carbs on one of my shelfs in the shop and am now thinking of taking one of my other engines and just doing a top end fresh up on it and go from there. That 383 is a killer and might rip the project into two parts....lol . Will see how it goes when i take the old heads off the other engine...

[daverod]

Always good to have a plan.

[wutnxt]

Originally Posted by daverod

Always good to have a plan.

Ya it's early and anthing can happen.....lmao....