LA 72 swb parts truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Darren MagooGardner · 01-19-2013, 03:15 AM

I will be bringing home my 72 swb parts truck Monday. It has a few parts I will sell. I will be making wall art out of the bed, front end and complet dash. I will get better pics as I remove them. It is 522 med bronze. Big parts can be picked up local. parts are plus shipping. If you see anything you like, just ask.
1 black dr visor 10.00
Bed spare tire carrier ( bottom rusted out) 10.00
Ram horn manifolds 30.00 SOLD
Brake boost brackets 20.00 sold
2nd set 20.00
Bench seat tracks for parts 25.00
Black center seatbelts and female dr and pass (bad shape) 10.00
3 speed trans for parts not sure if it is any good 20.00
Clutch and brake pedal assm. 30.00 SOLD
Black wheel w cracks and blue horn button 20.00
Gas pedal assembly 15.00SOLD,,SOLD
2nd pedal assembly 15.00
Radio and speaker bracket 15.00 SOLD PENDING PAYMENT
Small block engine stands 30.00 SOLD
New item..Factory licence plate holder with light very rare 30.00
3 way aux fuel tank valve 30.00 sold
Vent window screws and bezels 10.00 shippedsold
2ND SET 10.00 SHIPPED
A pair of 522 Bronze doors 60.00
5 LUG 3.73 coil rearend 125.00 UPICUP
Hood hinges pair..60.00 shipped (blasted) SOLD
Hood latch..(powder coated black) 30.00
Center grill support (powder coated black) 30.00
Door parts 10.00 each.
POWDER COATING NOW AVAILABLE.

more parts later

**WIDESIDE72** · 01-19-2013, 04:40 AM

How much for the power brake prop valve, the two valve to frame brake lines and the two firewall braces.

I also need the clevis pin that connects the e brake cable to the pedal Assy. As well as he clip that holds the cable to the floor.

Does the truck havethe original stainless wiper holders?

How about the rear axle brake lines?

I assume the grill is wasted (?) how about the center section and emblem? (btw if you toss the grill shell, be sure to drill the rivets and keep the mounting brackets as well as the inner to outer mounting hardware.

Shipping would be to Leander Tx 78641.
Posted via Mobile Device

Darren MagooGardner · 01-21-2013, 10:47 PM

Quote:

Originally Posted by WIDESIDE72

How much for the power brake prop valve, the two valve to frame brake lines and the two firewall braces.

I also need the clevis pin that connects the e brake cable to the pedal Assy. As well as he clip that holds the cable to the floor.

Does the truck havethe original stainless wiper holders?

How about the rear axle brake lines?

I assume the grill is wasted (?) how about the center section and emblem? (btw if you toss the grill shell, be sure to drill the rivets and keep the mounting brackets as well as the inner to outer mounting hardware.

Shipping would be to Leander Tx 78641.
Posted via Mobile Device

I have the clevis pin but I am not sure what floor clip your refering to.

**WIDESIDE72** · 01-22-2013, 12:35 AM

Quote:

Originally Posted by Darren MagooGardner

I have the clevis pin but I am not sure what floor clip your refering to.

I was mistaken on the floor clip. The 72 doesn't have one. I need the proportioning valve for parts, even if you twist the lines off in the prop valve to get them loose :

http://67-72chevytrucks.com/vboard/s...d.php?t=561373
Posted via Mobile Device

Darren MagooGardner · 01-22-2013, 10:40 AM

Quote:

Originally Posted by WIDESIDE72

I was mistaken on the floor clip. The 72 doesn't have one. I need the proportioning valve for parts, even if you twist the lines off in the prop valve to get them loose :

http://67-72chevytrucks.com/vboard/s...d.php?t=561373
Posted via Mobile Device

I will go and take the proportioning valve off and seatbelts. I will post some pics later.

Darren MagooGardner · 01-23-2013, 12:37 AM

Quote:

Originally Posted by WIDESIDE72

How much for the power brake prop valve, the two valve to frame brake lines and the two firewall braces.

I also need the clevis pin that connects the e brake cable to the pedal Assy. As well as he clip that holds the cable to the floor.

Does the truck havethe original stainless wiper holders?

How about the rear axle brake lines?

I assume the grill is wasted (?) how about the center section and emblem? (btw if you toss the grill shell, be sure to drill the rivets and keep the mounting brackets as well as the inner to outer mounting hardware.

Shipping would be to Leander Tx 78641.
Posted via Mobile Device

Is this the parts you wanted ? 20.00 shipped sound good for the clevis pin and brake valve part?

**WIDESIDE72** · 01-23-2013, 01:13 AM

Quote:

Originally Posted by Darren MagooGardner

Is this the parts you wanted ? 20.00 shipped sound good for the clevis pin and brake valve part?

That sounds like a fair price. Pm me your payment info
Posted via Mobile Device

**WIDESIDE72** · 01-23-2013, 03:25 AM

Quote:

Originally Posted by WIDESIDE72

That sounds like a fair price. Pm me your payment info
Posted via Mobile Device

Payment sent for clevis pin and prop valve
Posted via Mobile Device

**WIDESIDE72** · 01-27-2013, 12:16 PM

Quote:

Originally Posted by WIDESIDE72

Payment sent for clevis pin and prop valve
Posted via Mobile Device

Could you let me know when this ships? I am hopingto get it by Thursday so I can work on it on my days off (thurs fri and sat)
Posted via Mobile Device

tabarcus · 03-11-2013, 08:06 PM

I will take the 72 grill mounting brackets if still available?

Quote:

Originally Posted by WIDESIDE72

How much for the power brake prop valve, the two valve to frame brake lines and the two firewall braces.

I also need the clevis pin that connects the e brake cable to the pedal Assy. As well as he clip that holds the cable to the floor.

Does the truck havethe original stainless wiper holders?

How about the rear axle brake lines?

I assume the grill is wasted (?) how about the center section and emblem? (btw if you toss the grill shell, be sure to drill the rivets and keep the mounting brackets as well as the inner to outer mounting hardware.

Shipping would be to Leander Tx 78641.
Posted via Mobile Device

**WIDESIDE72** · 01-19-2013, 04:42 AM

Since you mention "parts truck", I assume no title(?)
Posted via Mobile Device

**WIDESIDE72** · 01-19-2013, 04:45 AM

From the photos, the bed looks solid. I don't mean to be pushy, but so you might consider selling it for a rougher one to make wall art out of. Decent SWB fleet beds bring a pretty penny. You might could make enough to buy a few more! Just my opinion and if I'm out of line I apologize.
Posted via Mobile Device

Darren MagooGardner · 01-19-2013, 12:57 PM

Quote:

Originally Posted by WIDESIDE72

From the photos, the bed looks solid. I don't mean to be pushy, but so you might consider selling it for a rougher one to make wall art out of. Decent SWB fleet beds bring a pretty penny. You might could make enough to buy a few more! Just my opinion and if I'm out of line I apologize.
Posted via Mobile Device

Not pushy at all. I allways like to hear different views on what I am about to do.The bed floor is rotted out. wheel wells are good and it has a few minor dents around tail lights. What is a SWB bed worth? As for a tittle,I think it does. I will hafta ask the guy.
I will check on the E brake parts when I get it home.
Dont ever hesitate to give your opinion....you never know what it is worth.
thanks

budnikguy · 01-19-2013, 10:59 AM

interested in the in bed spare tire carrier, pics please when you have the opportunity..

rwade · 01-19-2013, 11:17 AM

What is the condition of the cab? Any pictures? Price?

Thanks, Wade
Posted via Mobile Device

Darren MagooGardner · 01-19-2013, 01:01 PM

Quote:

Originally Posted by rwade

What is the condition of the cab? Any pictures? Price?

Thanks, Wade
Posted via Mobile Device

The cab is in typical bad shape. Rusted out in the normal places. I will post more pics as I get them.
thanks

Jsleeman · 01-19-2013, 12:57 PM

How much for the Master Cylinder and calipers?

Darren MagooGardner · 01-20-2013, 12:41 AM

Quote:

Originally Posted by Jsleeman

How much for the Master Cylinder and calipers?

The master cylinder does not have a cap and is full of water. Does have calipers. I am sure they need to be rebuilt. how does 30 plus shipping sound?

mvesr · 01-19-2013, 01:00 PM

Does it have power steering, and if so do you still have the mounting brackets?

Thanks-Mika

Darren MagooGardner · 01-19-2013, 01:02 PM

Quote:

Originally Posted by mvesr

Does it have power steering, and if so do you still have the mounting brackets?

Thanks-Mika

Manual steering.
thanks

rwade · 01-19-2013, 01:07 PM

I may have the P/S brackets. I'd have to look on Monday when I get back in the shop.
Posted via Mobile Device

soundqdoug · 01-19-2013, 01:20 PM

the BED!! I have been looking for months!

1old67 · 01-19-2013, 05:04 PM

How about the rear wire harness doesn't have to be perfect thx
Posted via Mobile Device

Darren MagooGardner · 01-20-2013, 12:22 AM

Quote:

Originally Posted by 1old67

How about the rear wire harness doesn't have to be perfect thx
Posted via Mobile Device

It has a rear wire harness. I am bringing the truck home tommorrow and I will see what shape it is in. If it is does 30.00 shipped sound good?
thanks

Darren MagooGardner · 01-26-2013, 01:24 AM

Quote:

Originally Posted by 1old67

How about the rear wire harness doesn't have to be perfect thx
Posted via Mobile Device

Sorry but the rear wire harness is junk.

01-19-2013, 03:15 AM	#1
Darren MagooGardner Registered User Join Date: May 2012 Location: minden la Posts: 704	72 swb parts truck I will be bringing home my 72 swb parts truck Monday. It has a few parts I will sell. I will be making wall art out of the bed, front end and complet dash. I will get better pics as I remove them. It is 522 med bronze. Big parts can be picked up local. parts are plus shipping. If you see anything you like, just ask. 1 black dr visor 10.00 Bed spare tire carrier ( bottom rusted out) 10.00 Ram horn manifolds 30.00 SOLD Brake boost brackets 20.00 sold 2nd set 20.00 Bench seat tracks for parts 25.00 Black center seatbelts and female dr and pass (bad shape) 10.00 3 speed trans for parts not sure if it is any good 20.00 Clutch and brake pedal assm. 30.00 SOLD Black wheel w cracks and blue horn button 20.00 Gas pedal assembly 15.00SOLD,,SOLD 2nd pedal assembly 15.00 Radio and speaker bracket 15.00 SOLD PENDING PAYMENT Small block engine stands 30.00 SOLD New item..Factory licence plate holder with light very rare 30.00 3 way aux fuel tank valve 30.00 *sold* Vent window screws and bezels 10.00 shippedsold 2ND SET 10.00 SHIPPED A pair of 522 Bronze doors 60.00 5 LUG 3.73 coil rearend 125.00 UPICUP Hood hinges pair..60.00 shipped (blasted) SOLD Hood latch..(powder coated black) 30.00 Center grill support (powder coated black) 30.00 Door parts 10.00 each. POWDER COATING NOW AVAILABLE. more parts later Attached Images Last edited by Darren MagooGardner; 03-23-2013 at 02:47 AM. Reason: SOLD ITEMS

01-19-2013, 04:40 AM	#2
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: 72 swb parts truck How much for the power brake prop valve, the two valve to frame brake lines and the two firewall braces. I also need the clevis pin that connects the e brake cable to the pedal Assy. As well as he clip that holds the cable to the floor. Does the truck havethe original stainless wiper holders? How about the rear axle brake lines? I assume the grill is wasted (?) how about the center section and emblem? (btw if you toss the grill shell, be sure to drill the rivets and keep the mounting brackets as well as the inner to outer mounting hardware. Shipping would be to Leander Tx 78641. Posted via Mobile Device

01-19-2013, 04:42 AM	#11
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: 72 swb parts truck Since you mention "parts truck", I assume no title(?) Posted via Mobile Device

01-19-2013, 04:45 AM	#12
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: 72 swb parts truck From the photos, the bed looks solid. I don't mean to be pushy, but so you might consider selling it for a rougher one to make wall art out of. Decent SWB fleet beds bring a pretty penny. You might could make enough to buy a few more! Just my opinion and if I'm out of line I apologize. Posted via Mobile Device

01-19-2013, 10:59 AM	#14
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 72 swb parts truck interested in the in bed spare tire carrier, pics please when you have the opportunity..

01-19-2013, 11:17 AM	#15
rwade Registered User Join Date: Apr 2010 Location: Louisiana Posts: 970	Re: 72 swb parts truck What is the condition of the cab? Any pictures? Price? Thanks, Wade Posted via Mobile Device

01-19-2013, 12:57 PM	#17
Jsleeman Registered User Join Date: Jan 2013 Location: Statesville, North Carolina Posts: 9	Re: 72 swb parts truck How much for the Master Cylinder and calipers?

01-19-2013, 01:00 PM	#19
mvesr Registered User Join Date: Sep 2012 Location: Arden NC Posts: 185	Re: 72 swb parts truck Does it have power steering, and if so do you still have the mounting brackets? Thanks-Mika

01-19-2013, 01:07 PM	#21
rwade Registered User Join Date: Apr 2010 Location: Louisiana Posts: 970	Re: 72 swb parts truck I may have the P/S brackets. I'd have to look on Monday when I get back in the shop. Posted via Mobile Device

01-19-2013, 01:20 PM	#22
soundqdoug Registered User Join Date: Aug 2012 Location: Oxnard, CA Posts: 114	Re: 72 swb parts truck the BED!! I have been looking for months!

01-19-2013, 05:04 PM	#23
1old67 Registered User Join Date: May 2012 Location: Houston TX Posts: 113	Re: 72 swb parts truck How about the rear wire harness doesn't have to be perfect thx Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.