hidden hitch???

[jdmsevenstar]

Hi all, i'm looking for intel on this :

Hidden Hitch 87034

wondering what this looks like on a 60-66 chevy c-10. i was hopping its can be mounted up high enough to go behind licence plate on after market roll pan(no rear bumper)

any ideas or suggestions appreciated...im almost done sand blasting frame so i would love to mount this stuff before i start painting thanks and good luck on the trucks!

[brokenspoke]

I used a 67-72 rear fleet bumper and a flip down license plate

[theastronaut]

This thread has some ideas for a hidden hitch.

http://67-72chevytrucks.com/vboard/s...d.php?t=547040
Posted via Mobile Device

[LostMy65]

From another thread:

Originally Posted by aerotruk63

Were making a hitch the old way with 1/2" X 2 1/2" flatbar.
Using a Hidden Hitch as a rear frame brace would support the bottom but not the top from twisting. May I suggest if you go that route you put a flat bar across the top of the frame to prevent it from spreading. Perhaps cap the end of the frame to prevent twisting.

Hidden Hitch Link:
http://www.hiddenhitch.com/fitguides...+ft.+Bed&Go=Go

Reese Link
http://www.reeseprod.com/

Valley Link:
http://www.vtowing.com/ApplicationLookup.aspx

Curt Link:
http://www.curtmfg.com/index.cfm

Posted via Mobile Device

[LostMy65]

http://www.persh.org/pickup/body1.htm#hiddenhitch
Posted via Mobile Device

[Clyde65]

this is what I got on my fleet, however, I have a roll pan and not a bumper.

http://www.airbagit.com/Hidden-Trail...hit-gm6072.htm

I also have a flip up license plate holder. the wiring connector is also hidden behind the license plate.

[jdmsevenstar]

thanks for all the advise