![]() |
|
![]() |
#1 |
Registered User
![]() Join Date: Dec 2012
Location: Montverde Florida
Posts: 3
|
dash pad replacement
can't figure out how to reach nuts on out side corners of dash.
|
![]() |
![]() |
![]() |
#2 |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,487
|
Re: dash pad replacement
-
You just about have to remove the instrument cluster and glove box liner. I have removed them without doing it but couldn't get them back on. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
![]() |
![]() |
![]() |
#3 |
Active Member
![]() Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: dash pad replacement
Easiest method as LockDoc mentioned. I have also used a flexible wire extension and/or a 1/4" u-joint swivel adapter. In some cases the end nuts are buggered up and won't come off. That's when it's cussing time. Last one I removed I actually had to pry the pad off and cut the small bolts off. It was a non salvegable pad anyway but still a pain.
Just read Lattimer's post... Zactly right! ![]()
__________________
68 GMC 250/3 speed Saginaw p/b p/s 69 Chevy 350/350 currently in pieces still lookin for a cab 06 Trailblazer I just want a vehicle that I can work on, that won't talk to me, leave error msgs or keep track of how I drive... |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Dec 2012
Location: Montverde Florida
Posts: 3
|
Re: dash pad replacement
flexible wire extension sounds like it will help some. Have been on head under dash many time trying work this out. Looks like no easy way to do this. thanks for help.
|
![]() |
![]() |
![]() |
#5 |
Scrapper 1
Join Date: Jan 2007
Location: Riverside Calif
Posts: 1,649
|
![]()
the joys of working on these trucks.But look on the Bight side your not dealing with plastic 1990 chevy trucks the light switch with them 4 small screws the go into the plastic you brake them your in trouble light switch will not work with out them 4 little screws.Remember you will only be putting in 1 dash pad in the life of the truck unless you have smokers in your truck that like to Put there Cigs out on your dash pad or some one that like playing with there knife and likes to stab things.Plus you learn how to remove you cluster and your glove box.
Plus if gives you time to check all your bulbs in your cluster to make sure therte nice and bright and working |
![]() |
![]() |
![]() |
#6 | |
Account Suspended
Join Date: Oct 2012
Location: Salt Lake City, Utah
Posts: 3,331
|
Re: dash pad replacement
Quote:
Posted via Mobile Device |
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jan 2013
Location: Mickleton, NJ
Posts: 1,776
|
Re: dash pad replacement
Remove instrument cluster and glovebox liner. Stand on your head. Cuss loudly for 20 minutes.
I wound up using a wobbly extension to reach those, but still needed the glovebox and the cluster out of the way.
__________________
Shawn 1970 Chevy C-10 SWB, 350, TKO 600 5 speed My build http://67-72chevytrucks.com/vboard/s...d.php?t=559881 |
![]() |
![]() |
![]() |
#8 |
Account Suspended
Join Date: Oct 2012
Location: Salt Lake City, Utah
Posts: 3,331
|
Re: dash pad replacement
Oh joy. Really makes me want to replace mine now. Damn
Posted via Mobile Device |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jan 2013
Location: Mickleton, NJ
Posts: 1,776
|
Re: dash pad replacement
Its not the worst job I have done, but its on the list of things I don't like doing. I'm a big guy and contorting myself into position to reach up under the dash is miserable.
__________________
Shawn 1970 Chevy C-10 SWB, 350, TKO 600 5 speed My build http://67-72chevytrucks.com/vboard/s...d.php?t=559881 |
![]() |
![]() |
![]() |
#10 | |
Account Suspended
Join Date: Oct 2012
Location: Salt Lake City, Utah
Posts: 3,331
|
Re: dash pad replacement
Quote:
Posted via Mobile Device |
|
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Nov 2011
Location: Sheffield, ALA
Posts: 2,471
|
Re: dash pad replacement
Take out instrument panel and glove box. no other way. sounds like alot of work but not as time consuming as not doing it.
|
![]() |
![]() |
![]() |
#12 |
Scrapper 1
Join Date: Jan 2007
Location: Riverside Calif
Posts: 1,649
|
Re: dash pad replacement
you say your a big guy witch way are you saying big tall wise or Big in the belly I'm 6'4 270 pounds and its not nice for me to work on anything in tight places LOL
|
![]() |
![]() |
![]() |
#13 | |
Registered User
Join Date: Jan 2013
Location: Mickleton, NJ
Posts: 1,776
|
Re: dash pad replacement
Quote:
Both....unfortunately. 6'3", 390. I'm a former powerlifter and now I armwrestle competitively. This was my best bench back in the day.
__________________
Shawn 1970 Chevy C-10 SWB, 350, TKO 600 5 speed My build http://67-72chevytrucks.com/vboard/s...d.php?t=559881 |
|
![]() |
![]() |
![]() |
#14 |
Active Member
![]() Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: dash pad replacement
Lattimer: Both....unfortunately. 6'3", 390. I'm a former powerlifter and now I armwrestle competitively.
Dang dude!! With your size it looks like it would be a tight squeeze getting in the door. And I though my football player son-in-law was big at 6'5" and 250.
__________________
68 GMC 250/3 speed Saginaw p/b p/s 69 Chevy 350/350 currently in pieces still lookin for a cab 06 Trailblazer I just want a vehicle that I can work on, that won't talk to me, leave error msgs or keep track of how I drive... |
![]() |
![]() |
![]() |
#15 | |
Registered User
Join Date: Mar 2012
Location: Georgetown, Texas
Posts: 73
|
Re: dash pad replacement
Quote:
You don't bother carrying a jack in your truck, do you ? That 905 is phenomenal.
__________________
'67 K-20 longbed 4X4, 350, SM-420, Vortec heads, flat top 4-brow pistons, Eaton 4.55's, Qjet, MSD 8365, Comp XE250H, Dynomax duals |
|
![]() |
![]() |
![]() |
#16 | |
Account Suspended
Join Date: Oct 2012
Location: Salt Lake City, Utah
Posts: 3,331
|
Re: dash pad replacement
Quote:
Posted via Mobile Device |
|
![]() |
![]() |
![]() |
#17 | |
Registered User
Join Date: Oct 2012
Location: Weatherford, Tx
Posts: 142
|
Re: dash pad replacement
Quote:
![]() Posted via Mobile Device
__________________
-Bruton 1968 GMC long bed 5.7/700R4 --I'd rather push a Chevy, than drive a Ford.-- |
|
![]() |
![]() |
![]() |
#18 |
Senior Member
![]() Join Date: Oct 2009
Location: Godley, TX
Posts: 17,963
|
Re: dash pad replacement
always a good idea to figure out all the stuff you need/want to do while you have to take out these major access points anyway. Considering a factory tach addition, adding a vac gauge, a new gb liner, putting in that cherished am/fm picked from the parts board, etc etc? Now would be the time to knock it all out together. It is simple, but I agree, a paint in the butt if it's all you're doing.
|
![]() |
![]() |
![]() |
#19 | |
Registered User
Join Date: Jan 2013
Location: Mickleton, NJ
Posts: 1,776
|
Re: dash pad replacement
Quote:
__________________
Shawn 1970 Chevy C-10 SWB, 350, TKO 600 5 speed My build http://67-72chevytrucks.com/vboard/s...d.php?t=559881 |
|
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Jul 2012
Location: Ft Wayne Indiana
Posts: 1,204
|
Re: dash pad replacement
The one above the radio is a real bear, unless of course you take the radio out. I didn't though, still got it done with glove box and cluster out.
__________________
71 K20 64 GMC mud truck |
![]() |
![]() |
![]() |
#21 |
Senior Member
![]() Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,265
|
Re: dash pad replacement
One time, after I got the old, flaky, sunburnt dashpad off and put the shiny new blue one in -- I tried for days to get one nut started on the first one on the Left [Drvr Sd]. I pulled it back out and found it had been threaded wrong or had some slag on the end of the threading from the buried bolt. I was pi$$ed. I sent it back to the vendor and got a new one with good threads embedded in the foam. But how was I to know I should have tried matching the nuts on all the new screws before I got on my head?
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. |
![]() |
![]() |
![]() |
#22 |
Moderator
![]() Join Date: May 2007
Location: Southern Cal
Posts: 20,005
|
Re: dash pad replacement
When you install your new pad make sure you do not over tighten the retaining nuts, otherwise you will end up with a dashpad that is warped and wavy across the top.
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man |
![]() |
![]() |
![]() |
#23 |
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: dash pad replacement
My big guy tip works well.Do seats at the same time.Take yours out to recover or clean.Do the dash pad then put the seats back in.Get a foam kneeling pad or pillow to help support your back while youu're twisting around under there.6' 280.
BTW if it's a bench seat 4 bolts ain't a bad deal for the room.Pull the cluster and such before the seats though.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Jul 2012
Location: Ft Wayne Indiana
Posts: 1,204
|
Re: dash pad replacement
All I'm gonna say is that I love being a kid.
![]()
__________________
71 K20 64 GMC mud truck |
![]() |
![]() |
![]() |
#25 |
Proprietor of Dale's Corner
![]() Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,101
|
Re: dash pad replacement
enjoy it while ya can, it doesn't last long LOL
__________________
"Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man |
![]() |
![]() |
![]() |
Bookmarks |
|
|