Where to buy pre-made vacuum line for th350?

[ap2002]

Where can i buy a pre-made steel line for a th350 vacuum modulator to intake manifold? Or if i can get a hose, what is the best kind to use that wont suck in with the vacuum? Thanks
Posted via Mobile Device

[TBONE1964]

I am not sure if it is an aftermarket item or not. Any Chevy with a 350 trans, car or truck will have this line. You may have to tweak the end near the intake to line up with the fitting in the intakeor use a longer peice of rubber hose to connect. I would check out some local salvage yards or cars/trucks for parts on craigslist. I would not use rubber hose myself, just a personal thing. I think it is 3/16 inside diameter. You can also buy steel line at the parts store and cut and bend it yourself if all else fails.

[trac209]

Ordinary steel brake line will work with rubber ends and can be bent easy enough. I've used the larger dia stuff without issue.
Posted via Mobile Device

[Wazup]

Go online to www.LMCTrucks.com and I beleive you can get in Stainless or Reg.

[chiefcfd]

I used 3/16 brake line and bent my own. Wasn't to hard to do.

[ap2002]

Thx for all the responses
Posted via Mobile Device

[FirstOwner69]

Try The Right Stuff. Here are links:
1972 http://www.getdiscbrakes.com/ttv7201

1969-1970 http://www.getdiscbrakes.com/ttv6905

I don't see any listed on their website for 1971, 1968 and 1967.