Psi harness where to mount computer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68fixeruper · 01-27-2013, 12:16 PM

Looking for pictures of how some of you mounted your computer. Its hard to find a plqce under the dash with the vintage air unit taking up almost all of the glove box space.i want it out of sight but accessible any input would be appreciated.
Posted via Mobile Device

see ten · 01-29-2013, 06:54 PM

i put mine under the hood... i also have vintage air.

68fixeruper · 01-29-2013, 07:03 PM

Do you have any pictures?

**Clyde65** · 01-29-2013, 08:23 PM

Put it in the heater box under the hood. You will need to get an fbody trans dipstick tho
Posted via Mobile Device

see ten · 01-29-2013, 10:02 PM

It's a super crappy cell phone pic... but... anyway...

Clears the master cylinder, the washer bottle and the hood hinge... My brother's has been like this for over 2 years and hasn't had any issues.

see ten · 01-29-2013, 10:06 PM

another shot... hard to see exactly how it's mounted from this side though...

C10_ustacould · 01-29-2013, 11:10 PM

I put mine in the area where the glove box was located... and routed the harness through a hole in the fire-wall/trans-tunnel.

TopFuel1966 · 01-30-2013, 08:46 PM

Mine is mounted on the inside of the left corner of the firewall behind the dashboard. The photos are before and after the finish. It's hidden from view by an A/C vent.

mooseknuckles · 01-31-2013, 02:08 PM

behind glove box....psi leaves lots of wire....

SamMargritz00 · 01-31-2013, 05:28 PM

I bolted mine to a piece of aluminum and used rubber spacers between the aluminum and firewall. I have the vintage air as well.

rmvlt1100 · 01-31-2013, 10:19 PM

Here is where I put mine. It's under the dash below the glove box. The heater tube clears the wire harness ok. The picture makes it look like its tight to the wires but that was before I wrapped the wires.

Posted via Mobile Device
Posted via Mobile Device

68fixeruper · 02-01-2013, 09:15 AM

Quote:

Originally Posted by BucksSS

I put mine in the area where the glove box was located... and routed the harness through a hole in the fire-wall/trans-tunnel.

Hey buck where did you mount your fuses that came with your harness.
Posted via Mobile Device

C10_ustacould · 02-01-2013, 12:33 PM

Quote:

Originally Posted by 68fixeruper

Hey buck where did you mount your fuses that came with your harness.
Posted via Mobile Device

Right now they are laying on top of the computer secured by a zip tie.

My plan is to fabricate a new shallow glove box insert to mount the fuse/relay panel, OBD II connector, and the control box for the electronic speedometer. Just need to get a day to work on it, when I get it done I will certainly post pics.

Indian113 · 01-31-2013, 11:10 PM

I mounted mine on fenderwell,easy to get too.

68fixeruper · 02-01-2013, 12:53 PM

Thank you i think i might just mount my computer on the firewall behind the motor and run the fuses and OBD II inside.
Posted via Mobile Device

mooseknuckles · 02-01-2013, 01:14 PM

wow...you're not even trying...not sure why you'd need to access the pcm that easy?...but, whatever...I didn't want my engine bay looking like a bag of snakes...so the only wires you can see are the plug wires..

C10_ustacould · 02-01-2013, 04:46 PM

Quote:

Originally Posted by mooseknuckles

wow...you're not even trying...not sure why you'd need to access the pcm that easy?...but, whatever...I didn't want my engine bay looking like a bag of snakes...so the only wires you can see are the plug wires..

I see the injector wires, the alternator wires...

mooseknuckles · 02-01-2013, 05:01 PM

Quote:

Originally Posted by BucksSS

I see the injector wires, the alternator wires...

lolz..

68fixeruper · 02-02-2013, 07:51 AM

Quote:

Originally Posted by mooseknuckles

wow...you're not even trying...not sure why you'd need to access the pcm that easy?...but, whatever...I didn't want my engine bay looking like a bag of snakes...so the only wires you can see are the plug wires..

You wont see any of my wiring when its done. Im just looking for the best place to put it. Reason i want it accessible is im planning to do a cam swap later and dont want it mounted somewhere i cant get to it easily.
Posted via Mobile Device

C10_ustacould · 02-01-2013, 05:11 PM

Looks sweet!

mooseknuckles · 02-01-2013, 05:17 PM

thanks...I'm hopin to get a ls1/ls6 intake on there to clean it up some more...

Indian113 · 02-01-2013, 05:59 PM

I'd like to clean up under the hood on my S10 but it's gonna have to warm up some before I can.

Indian113 · 02-01-2013, 06:00 PM

By the way Buck that harness I bought off of you works perfect from the git go. I can't thank you enough for your help! Ray

C10_ustacould · 02-01-2013, 08:24 PM

Quote:

Originally Posted by Indian113

By the way Buck that harness I bought off of you works perfect from the git go. I can't thank you enough for your help! Ray

I'm happy it worked out well!
Posted via Mobile Device

68fixeruper · 02-02-2013, 07:53 AM

Posted via Mobile Device

01-27-2013, 12:16 PM	#1
68fixeruper Registered User Join Date: Apr 2006 Location: Amarillo, Tx Posts: 267	Psi harness where to mount computer Looking for pictures of how some of you mounted your computer. Its hard to find a plqce under the dash with the vintage air unit taking up almost all of the glove box space.i want it out of sight but accessible any input would be appreciated. Posted via Mobile Device

01-29-2013, 06:54 PM	#2
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: Psi harness where to mount computer i put mine under the hood... i also have vintage air.

01-29-2013, 07:03 PM	#3
68fixeruper Registered User Join Date: Apr 2006 Location: Amarillo, Tx Posts: 267	Re: Psi harness where to mount computer Do you have any pictures?

01-29-2013, 08:23 PM	#4
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Psi harness where to mount computer Put it in the heater box under the hood. You will need to get an fbody trans dipstick tho Posted via Mobile Device __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

01-29-2013, 10:02 PM	#5
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: Psi harness where to mount computer It's a super crappy cell phone pic... but... anyway... Clears the master cylinder, the washer bottle and the hood hinge... My brother's has been like this for over 2 years and hasn't had any issues.

01-29-2013, 10:06 PM	#6
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: Psi harness where to mount computer another shot... hard to see exactly how it's mounted from this side though...

01-29-2013, 11:10 PM	#7
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Psi harness where to mount computer I put mine in the area where the glove box was located... and routed the harness through a hole in the fire-wall/trans-tunnel. Attached Images __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

01-30-2013, 08:46 PM	#8
TopFuel1966 Registered User Join Date: Jul 2009 Location: Menifee, CA Posts: 471	Re: Psi harness where to mount computer Mine is mounted on the inside of the left corner of the firewall behind the dashboard. The photos are before and after the finish. It's hidden from view by an A/C vent. Attached Images

01-31-2013, 02:08 PM	#9
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: Psi harness where to mount computer behind glove box....psi leaves lots of wire.... __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

01-31-2013, 05:28 PM	#10
SamMargritz00 Registered User Join Date: May 2011 Location: Hershey, Nebraska Posts: 319	Re: Psi harness where to mount computer I bolted mine to a piece of aluminum and used rubber spacers between the aluminum and firewall. I have the vintage air as well. Attached Images __________________ Blazer Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=483399

01-31-2013, 10:19 PM	#11
rmvlt1100 Registered User Join Date: Jan 2012 Location: Crest Hill, IL Posts: 337	Re: Psi harness where to mount computer Here is where I put mine. It's under the dash below the glove box. The heater tube clears the wire harness ok. The picture makes it look like its tight to the wires but that was before I wrapped the wires. Posted via Mobile Device Posted via Mobile Device __________________ This is my Build A 5.3L 1965 C-10 Fleetside http://67-72chevytrucks.com/vboard/s...d.php?t=502100

01-31-2013, 11:10 PM	#14
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: Psi harness where to mount computer I mounted mine on fenderwell,easy to get too. Attached Images Last edited by Indian113; 01-31-2013 at 11:10 PM. Reason: fat fingers

02-01-2013, 12:53 PM	#15
68fixeruper Registered User Join Date: Apr 2006 Location: Amarillo, Tx Posts: 267	Re: Psi harness where to mount computer Thank you i think i might just mount my computer on the firewall behind the motor and run the fuses and OBD II inside. Posted via Mobile Device

02-01-2013, 01:14 PM	#16
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: Psi harness where to mount computer wow...you're not even trying...not sure why you'd need to access the pcm that easy?...but, whatever...I didn't want my engine bay looking like a bag of snakes...so the only wires you can see are the plug wires.. Attached Images __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

02-01-2013, 05:11 PM	#20
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Psi harness where to mount computer Looks sweet! __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD



Register or Log In To remove these advertisements.

02-01-2013, 05:17 PM	#21
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: Psi harness where to mount computer thanks...I'm hopin to get a ls1/ls6 intake on there to clean it up some more... __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

02-01-2013, 05:59 PM	#22
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: Psi harness where to mount computer I'd like to clean up under the hood on my S10 but it's gonna have to warm up some before I can.

02-01-2013, 06:00 PM	#23
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: Psi harness where to mount computer By the way Buck that harness I bought off of you works perfect from the git go. I can't thank you enough for your help! Ray

02-02-2013, 07:53 AM	#25
68fixeruper Registered User Join Date: Apr 2006 Location: Amarillo, Tx Posts: 267	Re: Psi harness where to mount computer Posted via Mobile Device

Register or Log In To remove these advertisements.