Dually to SRW

[87 3+3]

I have an 87 crew cab dually that I want to make SRW.

It has a Dana 70 in the back, and I was wondering if I put a SRW fleet side bed on and changed the dually rims to normal rims, would the wheels line up with the bed flush like on a non dually truck?

Has anyone done this conversion and is this all i need to do to make the truck SRW instead of dually?

[meatwagon83]

you need a different rear, sell it and find a srw

[87 3+3]

Originally Posted by meatwagon83

you need a different rear, sell it and find a srw

Is the dually Dana 70 too wide?

[esbstuff]

Originally Posted by meatwagon83

you need a different rear, sell it and find a srw

I never knew that... I think I would try single before I spent $$$ on a rea.

[82ccshorty]

It will be to wide. The wheels will stick way out. Like he said you'd be better off buying a single wheel. Have any pics of your dually?
Posted via Mobile Device

[87 3+3]

Originally Posted by 82ccshorty

It will be to wide. The wheels will stick way out. Like he said you'd be better off buying a single wheel. Have any pics of your dually?
Posted via Mobile Device

yes, but i cant figure out how to post them with the "URL" thing

[82ccshorty]

Are they on your computer or another website?
Posted via Mobile Device

[87 3+3]

Originally Posted by 82ccshorty

Are they on your computer or another website?
Posted via Mobile Device

on my computer

[82ccshorty]

When you hit post reply you click the paper clip choose photos hit upload and post the comment and there they are
Posted via Mobile Device

[82ccshorty]

When you hit post reply you click the paper clip choose photos hit upload and post the comment and there they are
Posted via Mobile Device

[jsavage977]

I plan on doing the same thing to my truck. Its a crewcab longbed though i dont know if that matters. But I have heard that humvee h1 rims have enough negative offset that they will just bolt on to the drw hubs? Has anyone else hear this too? With the track width be the same as in the front as the rear? Sounds like a simple conversion to srw and get the sweet humvee beadlock rims too.. Anyone else know if this will work?

[87 3+3]

Originally Posted by jsavage977

I plan on doing the same thing to my truck. Its a crewcab longbed though i dont know if that matters. But I have heard that humvee h1 rims have enough negative offset that they will just bolt on to the drw hubs? Has anyone else hear this too? With the track width be the same as in the front as the rear? Sounds like a simple conversion to srw and get the sweet humvee beadlock rims too.. Anyone else know if this will work?

I just looked at your truck on your page and that is a good looking crew cab. I want to get mine at that ride height. What size tires are those, because they go perfect with that 4in lift?

[Desert1957]

Nice looking truck, Must really want a single wheel to change your look.

Desert

[chevy1ton]

Originally Posted by jsavage977

I plan on doing the same thing to my truck. Its a crewcab longbed though i dont know if that matters. But I have heard that humvee h1 rims have enough negative offset that they will just bolt on to the drw hubs? Has anyone else hear this too? With the track width be the same as in the front as the rear? Sounds like a simple conversion to srw and get the sweet humvee beadlock rims too.. Anyone else know if this will work?

You can use the hummer wheels with the DRW fr hubs, this is commomly done. The hummer wheels are affordable and available and SRW fr hubs are hard to find and expensive to buy.
You would have to get a SRW 14blt ff rear (check gear ratio) to replace the D70 which shouldn't be too hard to find (I have 3 out back). You should be able to use the same bed if you remove the fenders.

87 3+3 I think your truck looks good the way it is.

[82ccshorty]

Hit post reply click the paper clip choose you pics upload them and post comment
Posted via Mobile Device

[jsavage977]

its ok im a noob too ha ha

[87 3+3]

[87 3+3]

Alright, awesome!

Thanks,

There it is above. It is a 1987 4X4 with a 454tbi and standard sm465 4 speed transmission. I just bought it not too long ago. I am a junior at high school and its in my auto shop class and i am working on it in there.

[Anchorism]

Originally Posted by 87 3+3

Attachment 1051649

Attachment 1051650

Attachment 1051651

Attachment 1051652

Those are some VERY awesome wheels youve got there! Id be really interested in them if and when you get rid of them for the alcoas. Which are these do you know?

[87 3+3]

Originally Posted by Anchorism

Those are some VERY awesome wheels youve got there! Id be really interested in them if and when you get rid of them for the alcoas. Which are these do you know?

ya, i either want to put brushed aluminum alcoas on it or stock white wheels. I love the way white wheels, bumpers, and mirrors look. I dont know what kind of wheels are on it off the top of my head. I will check this evening though.

[Anchorism]

Originally Posted by 87 3+3

ya, i either want to put brushed aluminum alcoas on it or stock white wheels. I love the way white wheels, bumpers, and mirrors look. I dont know what kind of wheels are on it off the top of my head. I will check this evening though.

Ive got 2 complete sets maybe even more of the white wheels if your interested in maybe making a deal. And ive got family that goes to Idaho on occasion who could possibly make it happen without shipping. Dont be fooled by my location, my two rigs are in Southern Colorado with my dad.

[82ccshorty]

Looks good Don't change it. It would be cheaper to buy a srw then to change it
Posted via Mobile Device

[87 3+3]

Originally Posted by 82ccshorty

Looks good Don't change it. It would be cheaper to buy a srw then to change it
Posted via Mobile Device

Yeah i think i will just leave it dually if it is going to be that much work. I don't have that much of a problem with it and i will be hauling a camper and towing trailers. I was just thinking it could be more of a daily driver if it was SRW.

[bohmankid]

I have been thinking about buying a dually and changing it to single rear wheel as well because the crew cabs are hard to come by where I am and the dually's are selling for amazingly cheap. If I can't find a cheap single rear wheel I will probably be buying a dually and doing this swap. Can't be any harder than swapping a bed and axle, right? front axle swap as well?

[mopar346]

Truck looks awesome, let it be. The gas it would eat as a daily driver would pay for a shorty with a SB in little time.