|
01-31-2013, 11:03 AM | #1 |
Registered User
Join Date: Nov 2010
Location: Chickasha, OK
Posts: 182
|
Power steering hoses
Hello again guys!
First off I'll tell y'all what I already have and know, and then I'll ask my question so there is no confusion. This is for a 1966 SWB with a 70's 350. What I already have: Captainfabs bracket and coupler (AWESOME quality!) Power steering gear box from a 1975 C10 Power steering pump from 1975 C10 Brackets to install pump on block from POL What I need to know is what hoses to buy (pressure and return hoses). I have read that some hoses don't fit well and the inner fender needs to be cut, I am tryng to avoid this issue. So to you guys that have already done this, what did you get? Thanks in advance! |
01-31-2013, 11:32 AM | #2 |
Registered User
Join Date: Oct 2010
Location: Independence,KS
Posts: 1,477
|
Re: Power steering hoses
I would use hoses for a 1975 C10. They should lay flat on top of framerail, just like on the '75. If anything, very minor(maybe a 1/4") will need to be trimmed off the lip of fenderwell directly above hoses.
|
01-31-2013, 04:28 PM | #3 |
Registered User
Join Date: Oct 2006
Location: San Jose NOR*CAL
Posts: 3,080
|
Re: Power steering hoses
On my 1960 I went with one off of a 72 a/c delco # 36-355240 for the pressure hose and a # 36-350020 return line .
__________________
1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... " |
01-31-2013, 11:39 PM | #4 |
Registered User
Join Date: Nov 2010
Location: Chickasha, OK
Posts: 182
|
Re: Power steering hoses
thanks for the replies guys. slepysal, would you happen to have a pic or two?
|
Bookmarks |
|
|