Door Pin/Doam light - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dale99 · 01-31-2013, 10:49 PM

Working on getting all my lights working.

1. My drivers door pin was rusted in closed position. I bought some replacements, but the threads do not go all the way to the shoulder. So once I finsh tightening, it comes loose again. Anyone know of some repos that have threads the whole way? Repo oversized? Or has anyone drilled the hole out and welded a nut in there?

2. All my floor lights are missing. All my local parts store shows the courtesy light being the same as a truck which I know is wrong. Can someone tell me the bulb number for a floor light setup?

**Tom Vogel** · 02-03-2013, 11:06 AM

Call American Auto Wire, they will fix you up with the Correct stuff.

01-31-2013, 10:49 PM	#1
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Door Pin/Doam light Working on getting all my lights working. 1. My drivers door pin was rusted in closed position. I bought some replacements, but the threads do not go all the way to the shoulder. So once I finsh tightening, it comes loose again. Anyone know of some repos that have threads the whole way? Repo oversized? Or has anyone drilled the hole out and welded a nut in there? 2. All my floor lights are missing. All my local parts store shows the courtesy light being the same as a truck which I know is wrong. Can someone tell me the bulb number for a floor light setup? __________________ 2008 Sierra k3500 LMM 1994 s10 blazer 4x4 1991 Camaro Vert Rusted in Half RIP 1972 Jimmy 4x4 L05,4L60E,np205http://67-72chevytrucks.com/vboard/s...d.php?t=546364 1967 C10 L6/3tree(dads truck)

02-03-2013, 11:06 AM	#2
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,565	Re: Door Pin/Doam light Call American Auto Wire, they will fix you up with the Correct stuff.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.