The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-03-2013, 03:56 PM   #1
Mister-B
Account Suspended
 
Join Date: Oct 2012
Location: Salt Lake City, Utah
Posts: 3,331
Stripped door sill step plate screws. How to remove?

I'm replacing my door step plates, but the blasted screws are not playing nice. There are about 5 Philips screws on each. On one side, all are seized up. On the other side only one is.

So, how do I get these off? I've tried PB Blaster, but it didn't help

Posted via Mobile Device
Mister-B is offline   Reply With Quote
Old 02-03-2013, 04:13 PM   #2
ImNoSpaz
Registered User
 
ImNoSpaz's Avatar
 
Join Date: Sep 2012
Location: Sparks, Nevada
Posts: 108
Re: Stripped door sill step plate screws. How to remove?

Search for "Grabit Tool"
I have a set and they work on stripped screw heads preety good. There are 4 different sizes in the set but don't forget to run your drill in reverse while making the pilot hole and extracting.
ImNoSpaz is offline   Reply With Quote
Old 02-03-2013, 04:19 PM   #3
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
Re: Stripped door sill step plate screws. How to remove?

First thing to do is pit screw driver on screw,then tap straight down with a hammer. Now try the screw.

On the underside,use a vise grip to break loose (once the PB Baster has soaked). Once turned loose,screw them tight gain,cut the screws off from behind,and remove with screw driver
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 02-06-2013, 09:23 PM   #4
Mister-B
Account Suspended
 
Join Date: Oct 2012
Location: Salt Lake City, Utah
Posts: 3,331
Re: Stripped door sill step plate screws. How to remove?

Quote:
Originally Posted by special-K View Post
First thing to do is pit screw driver on screw,then tap straight down with a hammer. Now try the screw.

On the underside,use a vise grip to break loose (once the PB Baster has soaked). Once turned loose,screw them tight gain,cut the screws off from behind,and remove with screw driver
Thanks everyone. I tried the above suggestion, because it seemed like the easiest approach. Actually, all I did was the hammer on the screwdriver part, and it worked! Thanks! Got the replacement part installed, and it looks great
Posted via Mobile Device
Mister-B is offline   Reply With Quote
Old 02-03-2013, 04:19 PM   #5
Lee H
Registered User
 
Lee H's Avatar
 
Join Date: Jun 2010
Location: Upland Ca
Posts: 4,147
Re: Stripped door sill step plate screws. How to remove?

Spray the underside also. Try grabbing with a good set of pliers or vise grips.
__________________
1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner.

1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components.

My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703
Lee H is offline   Reply With Quote
Old 02-03-2013, 05:01 PM   #6
67swb72klb
Registered User
 
67swb72klb's Avatar
 
Join Date: Dec 2010
Location: livingston co.mi
Posts: 2,471
Re: Stripped door sill step plate screws. How to remove?

die grinder with a thin cut off wheel put a slot in it then get a straight screwdriver on it worked for me a bunch of times
__________________
California 65 GTO---Texas 64 burb 283 ---Oklahoma 67 CST SWB BBW wood bed 327 2004r---New Mexico 72 k10 350 350 auto---Georga 72 short step project
67swb72klb is offline   Reply With Quote
Old 02-06-2013, 11:19 PM   #7
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
Re: Stripped door sill step plate screws. How to remove?

Oh man,and I meant to say "put" not "pit". But it worked anyway!
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:12 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com