NC A variety of parts... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jeffg1010 · 02-09-2013, 04:02 PM

I have some stuff I need to get out of the way. I prefer not to ship the larger items

Hood for 69-72 - $100
Hood for 67-68 - $100 Just took off yesterday pending sold
Grille for 67-68 - $80 pending sold
Steering box off of 71 that I parted - $50
Crossmember off of '71 4wd Blazer that I parted - $30 sold
Front and rear driveshaft off of Blazer - $30/each
Tailgate off of Suburban - $50-sold
Radiator shroud off of 4wd Blazer - $30 has one broken tab, but the piece is still there.
Door hinges off of Blazer (assume they are the same as truck?) - $25
Lift gate hinges off of single wall Blazer top - $50
Hinge cover plates off of single wall top (have 3 good, 4th is bent) $25 for all
One Blazer single wall top hold down $15
Blazer single wall top windshield brackets -$25
Blazer Double wall top glass $50 each or both for $80
Blazer Double wall top $100 - (located in WV at my dads)
Clips for mounting dome light/switch plug to fiberglass on Blazer tops - $5/each
Blazer single wall top dome lights - $20 each
Blazer single wall top plug harness (the one that mounts to the top) - $30
Driver quality taillights $15
Driver quality backup lights $10
Tailgate hinges $20 -sold
Liftgate sliding mechanisms for Blazer - $20 - sold
Suburban Barn Door sliding mechanisms - $30
Stainless windshield wipers (both sides)- $25
Rearview mirror - $10
Door striker plates - $20 - (think thats what they are called)
Fuse block -$15

Let me know what you are looking at and I will get pics...

**DeadheadNM** · 02-09-2013, 04:19 PM

Any chance you have an OEM NP205 skidplate/crossmember or a set of the Blazer underdash lights? Thanks and good luck with the sales. Pete

jeffg1010 · 02-09-2013, 05:15 PM

Quote:

Originally Posted by DeadheadNM

Any chance you have an OEM NP205 skidplate/crossmember or a set of the Blazer underdash lights? Thanks and good luck with the sales. Pete

This the one I have:
Sorry no under dash lights that I'm aware of.

Posted via Mobile Device

c10monkey · 02-10-2013, 01:04 AM

Do you have the shaft between the gear box and steering column?
How much to 45036

Thanks

roOstersan · 02-10-2013, 02:36 AM

How about a locking hatch handle? Shipped to 94585
Posted via Mobile Device

sboris · 02-10-2013, 09:01 AM

Kind of interested in the shroud. Is the piece still hanging on? This would fit any 4wd right? Thanks, let me know.

Posted via Mobile Device

**DeadheadNM** · 02-10-2013, 10:21 AM

Jeff thanks for the pic. I'm all set for NP205 cross members, was after the optional skid plate, which had its own separate cross member. Pete

Littletony · 02-10-2013, 10:29 AM

what shape is the top in?

mvesr · 02-10-2013, 08:16 PM

Can you send pics of the 67-68 hood?

Thanks-Mika

jeffg1010 · 02-11-2013, 09:30 AM

Quote:

Originally Posted by c10monkey

Do you have the shaft between the gear box and steering column?
How much to 45036

Thanks

I dont think I have this, but I will look and let ya know

Quote:

Originally Posted by roOstersan

How about a locking hatch handle? Shipped to 94585
Posted via Mobile Device

I have 1, it's locking but has no key. It's pending sale to another member, but I'll let you know if he doesn't take it

Quote:

Originally Posted by sboris

Kind of interested in the shroud. Is the piece still hanging on? This would fit any 4wd right? Thanks, let me know.

Posted via Mobile Device

It isn't hanging on, but it's there. I assume it would be the same but Im not 100% sure.

Quote:

Originally Posted by mvesr

Can you send pics of the 67-68 hood?
I'll get you some pics. Local guy may already be taking it, but not sure yet.

Thanks-Mika

Quote:

Originally Posted by Littletony

what shape is the top in?

Its in good shape. It had two eyelets installed which could easily be removed and patched. But it is just the top. No glass or hatch.

Littletony · 02-11-2013, 10:12 AM

Jeff is there any way you could send me some pictures of the top?

sboris · 02-11-2013, 01:23 PM

Figure my shipping to 50213 please on the shroud. Thanks.
Posted via Mobile Device

sboris · 02-14-2013, 08:53 PM

Quote:

Originally Posted by sboris

Figure my shipping to 50213 please on the shroud. Thanks.
Posted via Mobile Device

Still interested in the shroud. Thanks
Posted via Mobile Device

c10monkey · 02-11-2013, 01:39 PM

I have already found an intermediate shaft. But thanks for trying
Posted via Mobile Device

PD1292 · 02-11-2013, 01:59 PM

Ill take the lift gate sliders. they are the ones that hold it up right?. shipping to 76904 please

PD1292 · 02-11-2013, 02:03 PM

It would also be nice if you had some of the bolts/screws that hold them to the top and hatch. pics please. thanks barry.

jeh · 02-11-2013, 03:19 PM

Not sure if you got any of my replies, thanks
Posted via Mobile Device

john@thepier · 02-11-2013, 03:32 PM

I will take the the np205 crossmember my zip is 53147 and I can do paypal. John

jeffg1010 · 02-17-2013, 09:16 PM

Sorry guys... crazy week. I am slackin'

Quote:

Originally Posted by sboris

Figure my shipping to 50213 please on the shroud. Thanks.
Posted via Mobile Device

I will get you some pics and a shipping quote this week.

Quote:

Originally Posted by PD1292

Ill take the lift gate sliders. they are the ones that hold it up right?. shipping to 76904 please

Yes, these are the one that hold up the gate. I will get you some pics. Shipping would be around $10. Thanks

Quote:

Originally Posted by PD1292

It would also be nice if you had some of the bolts/screws that hold them to the top and hatch. pics please. thanks barry.

It is possible that I have these too. I did away with them all together. I will have to look

Quote:

Originally Posted by john@thepier

I will take the the np205 crossmember my zip is 53147 and I can do paypal. John

Sounds good. I will get a shipping quote tomorrow.
Thanks

PD1292 · 02-17-2013, 09:51 PM

Cool. if you could throw in the bolts it would be great. PM me an address and ill go and get a money order. thanks Barry

jeh · 02-18-2013, 12:03 AM

Hey man just checking back with you on the hood and grille, thanks , Jason
Posted via Mobile Device

Matts Kustoms · 02-18-2013, 01:12 PM

I'd like to get in line on the grille if you will ship to 48030. Do you have any headlights or bezels?
Posted via Mobile Device
Posted via Mobile Device

Matts Kustoms · 02-18-2013, 01:15 PM

Id like the tailgate hinges if they are in good shape and the lower pivot, can I get a pick and quote to 48030
Posted via Mobile Device

john@thepier · 02-20-2013, 05:56 PM

I'm still in on the trans/crossmember when you get the chance. John

sboris · 02-20-2013, 06:27 PM

I'm gonna pass on the shroud.
Posted via Mobile Device

02-09-2013, 04:02 PM	#1
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,675	A variety of parts... I have some stuff I need to get out of the way. I prefer not to ship the larger items Hood for 69-72 - $100 Hood for 67-68 - $100 Just took off yesterday pending sold Grille for 67-68 - $80 pending sold Steering box off of 71 that I parted - $50 Crossmember off of '71 4wd Blazer that I parted - $30 sold Front and rear driveshaft off of Blazer - $30/each Tailgate off of Suburban - $50-sold Radiator shroud off of 4wd Blazer - $30 has one broken tab, but the piece is still there. Door hinges off of Blazer (assume they are the same as truck?) - $25 Lift gate hinges off of single wall Blazer top - $50 Hinge cover plates off of single wall top (have 3 good, 4th is bent) $25 for all One Blazer single wall top hold down $15 Blazer single wall top windshield brackets -$25 Blazer Double wall top glass $50 each or both for $80 Blazer Double wall top $100 - (located in WV at my dads) Clips for mounting dome light/switch plug to fiberglass on Blazer tops - $5/each Blazer single wall top dome lights - $20 each Blazer single wall top plug harness (the one that mounts to the top) - $30 Driver quality taillights $15 Driver quality backup lights $10 Tailgate hinges $20 -sold Liftgate sliding mechanisms for Blazer - $20 - sold Suburban Barn Door sliding mechanisms - $30 Stainless windshield wipers (both sides)- $25 Rearview mirror - $10 Door striker plates - $20 - (think thats what they are called) Fuse block -$15 Let me know what you are looking at and I will get pics... __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP... Last edited by jeffg1010; 03-20-2013 at 05:49 AM.

02-09-2013, 04:19 PM	#2
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,355	Re: A variety of parts... Any chance you have an OEM NP205 skidplate/crossmember or a set of the Blazer underdash lights? Thanks and good luck with the sales. Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

02-10-2013, 01:04 AM	#4
c10monkey Registered User Join Date: Oct 2012 Location: Lebanon Ohio Posts: 187	Re: A variety of parts... Do you have the shaft between the gear box and steering column? How much to 45036 Thanks __________________ 1971 Chevrolet C10 Inflation Fighter 1994 C3500 Crew Cab Dually 454

02-10-2013, 02:36 AM	#5
roOstersan Registered User Join Date: Aug 2012 Location: Vacaville, Ca Posts: 98	Re: A variety of parts... How about a locking hatch handle? Shipped to 94585 Posted via Mobile Device

02-10-2013, 09:01 AM	#6
sboris Registered User Join Date: Jun 2011 Location: Osceola, Ia Posts: 2,016	Re: A variety of parts... Kind of interested in the shroud. Is the piece still hanging on? This would fit any 4wd right? Thanks, let me know. Posted via Mobile Device __________________ Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039

02-10-2013, 10:21 AM	#7
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,355	Re: A variety of parts... Jeff thanks for the pic. I'm all set for NP205 cross members, was after the optional skid plate, which had its own separate cross member. Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

02-10-2013, 10:29 AM	#8
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: A variety of parts... what shape is the top in? __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

02-10-2013, 08:16 PM	#9
mvesr Registered User Join Date: Sep 2012 Location: Arden NC Posts: 185	Re: A variety of parts... Can you send pics of the 67-68 hood? Thanks-Mika

02-11-2013, 10:12 AM	#11
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: A variety of parts... Jeff is there any way you could send me some pictures of the top? __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

02-11-2013, 01:23 PM	#12
sboris Registered User Join Date: Jun 2011 Location: Osceola, Ia Posts: 2,016	Re: A variety of parts... Figure my shipping to 50213 please on the shroud. Thanks. Posted via Mobile Device __________________ Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039

02-11-2013, 01:39 PM	#14
c10monkey Registered User Join Date: Oct 2012 Location: Lebanon Ohio Posts: 187	Re: A variety of parts... I have already found an intermediate shaft. But thanks for trying Posted via Mobile Device __________________ 1971 Chevrolet C10 Inflation Fighter 1994 C3500 Crew Cab Dually 454

02-11-2013, 01:59 PM	#15
PD1292 Registered User Join Date: Mar 2011 Location: San Angelo Texas Posts: 190	Re: A variety of parts... Ill take the lift gate sliders. they are the ones that hold it up right?. shipping to 76904 please

02-11-2013, 02:03 PM	#16
PD1292 Registered User Join Date: Mar 2011 Location: San Angelo Texas Posts: 190	Re: A variety of parts... It would also be nice if you had some of the bolts/screws that hold them to the top and hatch. pics please. thanks barry.

02-11-2013, 03:19 PM	#17
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: A variety of parts... Not sure if you got any of my replies, thanks Posted via Mobile Device

02-11-2013, 03:32 PM	#18
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: A variety of parts... I will take the the np205 crossmember my zip is 53147 and I can do paypal. John



Register or Log In To remove these advertisements.

02-17-2013, 09:51 PM	#20
PD1292 Registered User Join Date: Mar 2011 Location: San Angelo Texas Posts: 190	Re: A variety of parts... Cool. if you could throw in the bolts it would be great. PM me an address and ill go and get a money order. thanks Barry

02-18-2013, 12:03 AM	#21
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: A variety of parts... Hey man just checking back with you on the hood and grille, thanks , Jason Posted via Mobile Device

02-18-2013, 01:12 PM	#22
Matts Kustoms Registered User Join Date: Nov 2012 Location: Hazel Park, MI Posts: 76	Re: A variety of parts... I'd like to get in line on the grille if you will ship to 48030. Do you have any headlights or bezels? Posted via Mobile Device Posted via Mobile Device

02-18-2013, 01:15 PM	#23
Matts Kustoms Registered User Join Date: Nov 2012 Location: Hazel Park, MI Posts: 76	Re: A variety of parts... Id like the tailgate hinges if they are in good shape and the lower pivot, can I get a pick and quote to 48030 Posted via Mobile Device

02-20-2013, 05:56 PM	#24
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: A variety of parts... I'm still in on the trans/crossmember when you get the chance. John

02-20-2013, 06:27 PM	#25
sboris Registered User Join Date: Jun 2011 Location: Osceola, Ia Posts: 2,016	Re: A variety of parts... I'm gonna pass on the shroud. Posted via Mobile Device __________________ Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039

Register or Log In To remove these advertisements.