Shaved wiper cowl- panel from Scott's hot rods. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jmedero · 02-16-2013, 10:19 PM

Well I wanted my cowl shaved and started doing research. After talking to Justin at Scott's I went with the Scott's panel. I know that they make a fiberglass unit but I wanted metal. Justin said they will sell the patch panel or ship him my cowl and they will shave the vents and antenna and ship it back metal finished. $159 for panel, $400 for the complete panel done by Scott's. here are some pics. I could not finish it today but I will and ill post up some pics.

Posted via Mobile Device

jmedero · 02-16-2013, 10:22 PM

Fitment was very good. It was english wheeled to give it shape. Now I just need to put on a few hundred tack welds and then clean it up a bit. I bolted the panel in place and tacked the corners of the cowl to hold it in place and shape. Ill update once I get it all welded in.
Posted via Mobile Device

shawno72 · 02-16-2013, 10:33 PM

Subscribed

sduckworth13 · 02-16-2013, 11:09 PM

That looks great
Posted via Mobile Device

jmedero · 02-16-2013, 11:40 PM

Thanks. I have heard nightmare stories of people shaving the cowl because of the shape and curves. This made it easier and a nice fit. If I had the extra $$ I would have had them do the cowl then just bolt on.
Posted via Mobile Device

Scottshotrods · 02-16-2013, 11:45 PM

Doing a good job Juan
Posted via Mobile Device

jmedero · 02-16-2013, 11:55 PM

Thanks master yoda.
Posted via Mobile Device

Chvy2NV · 02-17-2013, 12:31 AM

Looks great!!
Posted via Mobile Device

jmedero · 02-17-2013, 12:34 AM

Thanks man
Posted via Mobile Device

YBNORML · 02-17-2013, 01:05 AM

Looks awesome! Looks like I just found another item for my must have list

Do you know if it is available without the wiper slots?

jmedero · 02-17-2013, 01:14 AM

I think so. I'm sure Justin will chime in here.
Posted via Mobile Device

jmedero · 03-04-2013, 01:37 AM

Took 2 hours tody and finished up the cowl today. I'm really happy with the way it finished out.
Posted via Mobile Device

quick60 · 03-04-2013, 01:40 AM

Looks great!!!! Why do cars have that vented anyway? Just curious.

nibs · 03-04-2013, 08:38 AM

Quote:

Originally Posted by quick60

Looks great!!!! Why do cars have that vented anyway? Just curious.

Im guessing that its a fresh source of air for your HAVC blower, and also a nice breeze to keep your wiper motor cool under working loads

67ctener · 03-04-2013, 01:45 AM

Probably a great idea to prevent future rust also
Posted via Mobile Device

sduckworth13 · 03-04-2013, 01:48 AM

You did a excellent job on welding it up and not distorting the contour at all, which would be easy to mess up.

jmedero · 03-04-2013, 02:00 AM

Thanks guys. The panel fit great which made it a lot easier. It's used for fresh air from the factory ac/heat system.
Posted via Mobile Device

jjzepplin · 03-04-2013, 07:31 AM

Where is Scotts and do you have a link or phone #

nibs · 03-04-2013, 08:29 AM

Quote:

Originally Posted by jjzepplin

Where is Scotts and do you have a link or phone #

http://www.scottshotrods.com/

They are based out of Southern Cali. Good guys to work with, I bought a set of RideTech control arms from them a couple years back. Def reccommend

jmedero · 03-04-2013, 09:20 AM

Here is the shops number 1 (805) 485-0382.
They are in Oxnard ca. South Cali. Justin loves these trucks and makes a ton of stuff for them.
Posted via Mobile Device

jjzepplin · 03-04-2013, 09:32 AM

Sweet! Thank You. I went to the site and his stuff is pretty nice...

LowLifeS10 · 03-30-2013, 02:37 PM

looking good! the tiny screws that holds it together in the upper side. Can I just go ahead and remove them and the cowl sits good anyway?

jmedero · 03-30-2013, 05:35 PM

Yes sir. Nice and snug
Posted via Mobile Device

LowLifeS10 · 03-31-2013, 05:34 PM

Great. Well that filler plate. was it made just for you or can I order one myself at their site? Can't seem to find it when i'm looking on their site!

Scottshotrods · 03-31-2013, 05:59 PM

We have 45 cowl filler panels In stock and ready ship out same day.Call us at the shop at 805 485-0382 and we will take care of you

Justin
Posted via Mobile Device

02-16-2013, 10:19 PM	#1
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Shaved wiper cowl- panel from Scott's hot rods. Well I wanted my cowl shaved and started doing research. After talking to Justin at Scott's I went with the Scott's panel. I know that they make a fiberglass unit but I wanted metal. Justin said they will sell the patch panel or ship him my cowl and they will shave the vents and antenna and ship it back metal finished. $159 for panel, $400 for the complete panel done by Scott's. here are some pics. I could not finish it today but I will and ill post up some pics. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

02-16-2013, 10:22 PM	#2
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Shaved wiper cowl- panel from Scott's hot rods. Fitment was very good. It was english wheeled to give it shape. Now I just need to put on a few hundred tack welds and then clean it up a bit. I bolted the panel in place and tacked the corners of the cowl to hold it in place and shape. Ill update once I get it all welded in. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

02-16-2013, 10:33 PM	#3
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shaved wiper cowl- panel from Scott's hot rods. Subscribed __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

02-16-2013, 11:09 PM	#4
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Shaved wiper cowl- panel from Scott's hot rods. That looks great Posted via Mobile Device __________________ Scott

02-16-2013, 11:40 PM	#5
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Shaved wiper cowl- panel from Scott's hot rods. Thanks. I have heard nightmare stories of people shaving the cowl because of the shape and curves. This made it easier and a nice fit. If I had the extra $$ I would have had them do the cowl then just bolt on. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

02-16-2013, 11:45 PM	#6
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Shaved wiper cowl- panel from Scott's hot rods. Doing a good job Juan Posted via Mobile Device

02-16-2013, 11:55 PM	#7
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Shaved wiper cowl- panel from Scott's hot rods. Thanks master yoda. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

02-17-2013, 12:31 AM	#8
Chvy2NV Registered User Join Date: Apr 2012 Location: So. Florida Posts: 873	Re: Shaved wiper cowl- panel from Scott's hot rods. Looks great!! Posted via Mobile Device

02-17-2013, 12:34 AM	#9
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Shaved wiper cowl- panel from Scott's hot rods. Thanks man Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

02-17-2013, 01:05 AM	#10
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,844	Re: Shaved wiper cowl- panel from Scott's hot rods. Looks awesome! Looks like I just found another item for my must have list Do you know if it is available without the wiper slots? __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

02-17-2013, 01:14 AM	#11
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Shaved wiper cowl- panel from Scott's hot rods. I think so. I'm sure Justin will chime in here. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

03-04-2013, 01:37 AM	#12
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Shaved wiper cowl- panel from Scott's hot rods. Took 2 hours tody and finished up the cowl today. I'm really happy with the way it finished out. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

03-04-2013, 01:40 AM	#13
quick60 Registered User Join Date: Dec 2012 Location: Virginia Posts: 233	Re: Shaved wiper cowl- panel from Scott's hot rods. Looks great!!!! Why do cars have that vented anyway? Just curious.

03-04-2013, 01:45 AM	#15
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Shaved wiper cowl- panel from Scott's hot rods. Probably a great idea to prevent future rust also Posted via Mobile Device __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

03-04-2013, 01:48 AM	#16
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Shaved wiper cowl- panel from Scott's hot rods. You did a excellent job on welding it up and not distorting the contour at all, which would be easy to mess up. __________________ Scott



Register or Log In To remove these advertisements.

03-04-2013, 02:00 AM	#17
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Shaved wiper cowl- panel from Scott's hot rods. Thanks guys. The panel fit great which made it a lot easier. It's used for fresh air from the factory ac/heat system. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

03-04-2013, 07:31 AM	#18
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: Shaved wiper cowl- panel from Scott's hot rods. Where is Scotts and do you have a link or phone # __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

03-04-2013, 09:20 AM	#20
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Shaved wiper cowl- panel from Scott's hot rods. Here is the shops number 1 (805) 485-0382. They are in Oxnard ca. South Cali. Justin loves these trucks and makes a ton of stuff for them. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

03-04-2013, 09:32 AM	#21
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: Shaved wiper cowl- panel from Scott's hot rods. Sweet! Thank You. I went to the site and his stuff is pretty nice... __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

03-30-2013, 02:37 PM	#22
LowLifeS10 Registered User Join Date: Jul 2011 Location: Sweden Posts: 165	Re: Shaved wiper cowl- panel from Scott's hot rods. looking good! the tiny screws that holds it together in the upper side. Can I just go ahead and remove them and the cowl sits good anyway? __________________ GMC C15 -68 project: http://67-72chevytrucks.com/vboard/s...d.php?t=526059 Front/back Porterbuilt dropmember, Accuair, LS1/4L60e Chevrolet C20 -72 C20 to K10/20 conversion, LS power.

03-30-2013, 05:35 PM	#23
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Shaved wiper cowl- panel from Scott's hot rods. Yes sir. Nice and snug Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

03-31-2013, 05:34 PM	#24
LowLifeS10 Registered User Join Date: Jul 2011 Location: Sweden Posts: 165	Re: Shaved wiper cowl- panel from Scott's hot rods. Great. Well that filler plate. was it made just for you or can I order one myself at their site? Can't seem to find it when i'm looking on their site! __________________ GMC C15 -68 project: http://67-72chevytrucks.com/vboard/s...d.php?t=526059 Front/back Porterbuilt dropmember, Accuair, LS1/4L60e Chevrolet C20 -72 C20 to K10/20 conversion, LS power.

03-31-2013, 05:59 PM	#25
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Shaved wiper cowl- panel from Scott's hot rods. We have 45 cowl filler panels In stock and ready ship out same day.Call us at the shop at 805 485-0382 and we will take care of you Justin Posted via Mobile Device

Register or Log In To remove these advertisements.