AR COMPLETE part out 1971 k20 short bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AMERICAN PICK-UP · 02-19-2013, 02:30 PM

located in paragould arkansas zip 72450. all shipped prices thru usps to the lower 48 states.
VERY RUSTY cab is JUNK no engine no trans,no transfer case,no brackts or pulleys. no body parts except the left fender.rad support is junk. inner fenders are junk,right fender is junk, cab is junk.grille is junk.
was a factory k-20 4x4 long bed somebody cut the bed and made it a swb.
1 set of 4 16 inch steel split wheels. $150.00 NO SHIPPING.
dana 44 disc brake front axle 4.09 ratio complete hub to hub. $450.00 PLUS THE SHIPPING
1 HO 52 rear axle assy. 4.10 ratio. $450.00 PLUS SHIPPING
1 bare frame was a lwb some body made it a shorty.$750.00
1 set of 2 rear leaf springs $150.00 PLUS THE FREIGHT
1 set of 2 front leaf springs $150.00 PLUS THE FREIGHT
set of transfer case mounts $75.00 shipped.
front leaf spring mount plates and u bolts $100.00 shipped.
1 set of rear leaf spring plates $60.00 shipped.
1 left front fender surface rust, 1 dent $100.00 NO SHIPPING.
1 rear driveshaft 48 inches weld to weld $125.00 PLUS THE FREIGHT.
1

AMERICAN PICK-UP · 02-19-2013, 02:33 PM

more pics.

AMERICAN PICK-UP · 02-19-2013, 02:35 PM

a few more pics.

AMERICAN PICK-UP · 02-19-2013, 02:38 PM

and yet more pics.

AMERICAN PICK-UP · 02-19-2013, 02:40 PM

and more of the frame.

Bishops Trucks · 02-19-2013, 02:40 PM

How much to ship the rear springs to 22066? Are they solid and springy so to speak?

AMERICAN PICK-UP · 02-19-2013, 02:46 PM

Quote:

Originally Posted by Bishops Trucks

How much to ship the rear springs to 22066? Are they solid and springy so to speak?

we had to cut the bolts so they have bolts stuck in them. i will check on shipping.

Bishops Trucks · 02-19-2013, 02:57 PM

Quote:

Originally Posted by AMERICAN PICK-UP

we had to cut the bolts so they have bolts stuck in them. i will check on shipping.

A little heat and a big hammer and punch would get them out. Thanks, they would surely help my sagging issue on my shortbed.

AMERICAN PICK-UP · 02-19-2013, 02:42 PM

front axle pics.

AMERICAN PICK-UP · 02-19-2013, 02:44 PM

rear axle pics.

Spartan · 02-23-2013, 02:15 PM

I'm interested in the Cab roof markers shipped to 97462?
Thanks
Nim
Posted via Mobile Device

**MJN** · 02-25-2013, 02:21 PM

Interested in the front axle brake caliper brackets if you'll separate them and the dust sheilds are intact. Thanks!

Matts Kustoms · 02-25-2013, 02:36 PM

I'd like to get in line on cab roof markers, let me know shipped to 48030
Posted via Mobile Device

AMERICAN PICK-UP · 03-11-2013, 12:41 PM

Quote:

Originally Posted by Matts Kustoms

I'd like to get in line on cab roof markers, let me know shipped to 48030
Posted via Mobile Device

$40.00 shipped on them.

Matts Kustoms · 03-11-2013, 11:05 PM

Quote:

Originally Posted by AMERICAN PICK-UP

$40.00 shipped on them.

I'm gonna pass on the roof markers. Thanks though.
Posted via Mobile Device

AMERICAN PICK-UP · 03-12-2013, 08:37 AM

Quote:

Originally Posted by MJN

Interested in the front axle brake caliper brackets if you'll separate them and the dust sheilds are intact. Thanks!

i am not selling those seperate right now.

AMERICAN PICK-UP · 03-11-2013, 12:41 PM

Quote:

Originally Posted by Spartan

I'm interested in the Cab roof markers shipped to 97462?
Thanks
Nim
Posted via Mobile Device

$40.00 shipped on the cab lights i will post a better pic of them.

Special Greg · 02-25-2013, 03:57 PM

i would be interested in the parts from the ball joints out if you would separate. If not just the spindles and hubs will work. Thanks

Spartan · 02-25-2013, 04:22 PM

I'm letting go of the cab roof markers (aka clearance lights) to the next in line. Found some locally.
Thanks
Nim
Posted via Mobile Device

AMERICAN PICK-UP · 03-11-2013, 12:43 PM

better pics of the cab lights.

**gmc 2500 4x4** · 03-11-2013, 06:14 PM

front springs , what is the width at the ends? quote to 14063

AMERICAN PICK-UP · 03-12-2013, 08:47 AM

Quote:

Originally Posted by gmc 2500 4x4

front springs , what is the width at the ends? quote to 14063

i think that i have them sold locally.

**Ol Blue K20** · 03-11-2013, 07:27 PM

Would you sell front spring hanger/rad support Bracket from pass side? If so how much?

AMERICAN PICK-UP · 03-12-2013, 08:39 AM

Quote:

Originally Posted by Ol Blue K20

Would you sell front spring hanger/rad support Bracket from pass side? If so how much?

i am not taking those off of the frame.

**Ol Blue K20** · 03-12-2013, 10:43 AM

Quote:

Originally Posted by AMERICAN PICK-UP

i am not taking those off of the frame.

Ok, Thanks, but keep me in mind if you change your mind.

02-19-2013, 02:30 PM	#1
AMERICAN PICK-UP Registered User Join Date: Jul 2012 Location: paragould,arkansas Posts: 858	COMPLETE part out 1971 k20 short bed located in paragould arkansas zip 72450. all shipped prices thru usps to the lower 48 states. VERY RUSTY cab is JUNK no engine no trans,no transfer case,no brackts or pulleys. no body parts except the left fender.rad support is junk. inner fenders are junk,right fender is junk, cab is junk.grille is junk. was a factory k-20 4x4 long bed somebody cut the bed and made it a swb. 1 set of 4 16 inch steel split wheels. $150.00 NO SHIPPING. dana 44 disc brake front axle 4.09 ratio complete hub to hub. $450.00 PLUS THE SHIPPING 1 HO 52 rear axle assy. 4.10 ratio. $450.00 PLUS SHIPPING 1 bare frame was a lwb some body made it a shorty.$750.00 1 set of 2 rear leaf springs $150.00 PLUS THE FREIGHT 1 set of 2 front leaf springs $150.00 PLUS THE FREIGHT set of transfer case mounts $75.00 shipped. front leaf spring mount plates and u bolts $100.00 shipped. 1 set of rear leaf spring plates $60.00 shipped. 1 left front fender surface rust, 1 dent $100.00 NO SHIPPING. 1 rear driveshaft 48 inches weld to weld $125.00 PLUS THE FREIGHT. 1 Attached Images Last edited by AMERICAN PICK-UP; 02-19-2013 at 02:50 PM.

02-19-2013, 02:33 PM	#2
AMERICAN PICK-UP Registered User Join Date: Jul 2012 Location: paragould,arkansas Posts: 858	Re: COMPLETE part out 1971 k20 short bed more pics. Attached Images

02-19-2013, 02:35 PM	#3
AMERICAN PICK-UP Registered User Join Date: Jul 2012 Location: paragould,arkansas Posts: 858	Re: COMPLETE part out 1971 k20 short bed a few more pics. Attached Images

02-19-2013, 02:38 PM	#4
AMERICAN PICK-UP Registered User Join Date: Jul 2012 Location: paragould,arkansas Posts: 858	Re: COMPLETE part out 1971 k20 short bed and yet more pics. Attached Images

02-19-2013, 02:40 PM	#5
AMERICAN PICK-UP Registered User Join Date: Jul 2012 Location: paragould,arkansas Posts: 858	Re: COMPLETE part out 1971 k20 short bed and more of the frame. Attached Images

02-19-2013, 02:40 PM	#6
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,731	Re: COMPLETE part out 1971 k20 short bed How much to ship the rear springs to 22066? Are they solid and springy so to speak? __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

02-19-2013, 02:42 PM	#9
AMERICAN PICK-UP Registered User Join Date: Jul 2012 Location: paragould,arkansas Posts: 858	Re: COMPLETE part out 1971 k20 short bed front axle pics. Attached Images

02-19-2013, 02:44 PM	#10
AMERICAN PICK-UP Registered User Join Date: Jul 2012 Location: paragould,arkansas Posts: 858	Re: COMPLETE part out 1971 k20 short bed rear axle pics. Attached Images

02-23-2013, 02:15 PM	#11
Spartan Registered User Join Date: Dec 2012 Location: Backwoods, OR Posts: 888	Re: COMPLETE part out 1971 k20 short bed I'm interested in the Cab roof markers shipped to 97462? Thanks Nim Posted via Mobile Device __________________ '69 K20 350/4 speed/Rockwell/D44/HO52. "orange rhymes with door hinge"

02-25-2013, 02:21 PM	#12
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,045	Re: COMPLETE part out 1971 k20 short bed Interested in the front axle brake caliper brackets if you'll separate them and the dust sheilds are intact. Thanks! __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

02-25-2013, 02:36 PM	#13
Matts Kustoms Registered User Join Date: Nov 2012 Location: Hazel Park, MI Posts: 76	Re: COMPLETE part out 1971 k20 short bed I'd like to get in line on cab roof markers, let me know shipped to 48030 Posted via Mobile Device

02-25-2013, 03:57 PM	#18
Special Greg Registered User Join Date: Mar 2008 Location: Fort Collins Colorado Posts: 13	Re: COMPLETE part out 1971 k20 short bed i would be interested in the parts from the ball joints out if you would separate. If not just the spindles and hubs will work. Thanks

02-25-2013, 04:22 PM	#19
Spartan Registered User Join Date: Dec 2012 Location: Backwoods, OR Posts: 888	Re: COMPLETE part out 1971 k20 short bed I'm letting go of the cab roof markers (aka clearance lights) to the next in line. Found some locally. Thanks Nim Posted via Mobile Device __________________ '69 K20 350/4 speed/Rockwell/D44/HO52. "orange rhymes with door hinge"

03-11-2013, 12:43 PM	#20
AMERICAN PICK-UP Registered User Join Date: Jul 2012 Location: paragould,arkansas Posts: 858	Re: COMPLETE part out 1971 k20 short bed better pics of the cab lights. Attached Images

03-11-2013, 06:14 PM	#21
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,959	Re: COMPLETE part out 1971 k20 short bed front springs , what is the width at the ends? quote to 14063



Register or Log In To remove these advertisements.

03-11-2013, 07:27 PM	#23
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,242	Re: COMPLETE part out 1971 k20 short bed Would you sell front spring hanger/rad support Bracket from pass side? If so how much? __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

Register or Log In To remove these advertisements.