OK WTB: Bench seat adjusting rod

[russgoodman]

I'm looking for the rod that connects the adjuster on the drivers side to the passenger side of a bench seat. Anyone have one they would part with? Truck is a 69 but I *think* the seat is out of a 72. I think they are all the same (??). I could rig something up but this truck has been rigged up so bad already Im trying to do everything right. Shipping would be to 73527. Thanks

Russ

[29od1]

For the bench seats it's actually a wire that connects the two.

A rod was used on the bucket seat DS brackets.

[Todd68Chevy]

Originally Posted by 29od1

For the bench seats it's actually a wire that connects the two.

A rod was used on the bucket seat DS brackets.

I am not sure which years used what but I have had bench seats with a metal rod and some with a wire.

[29od1]

That could be, I would just use a metal wire since that's what they did on the later trucks.

Hopefully someone still has a rod if Russ wants to use that.

[PICKMUP]

1/8" rod from a hardware store is an easy fixl...

[russgoodman]

Originally Posted by PICKMUP

1/8" rod from a hardware store is an easy fixl...

I may have to try that if nobody has one laying around. I was hoping to get lucky. I think I can steal the wire out of a square body 7-up truck out back that my father in law is scrapping, but figured the rod would look better blasted and painted black.

Here's an old WTB thread with a few pics

http://67-72chevytrucks.com/vboard/s...BENCH+SEAT+ROD

[BugzC10]

I also need to hook up the passenger side. Could someone take some pictures of how and where the wire attaches to each side. I have the locking key fir the passenger side slider, but need to see how the wire and I'm assuming a spring attaches so both keys are moved simultaneously when the driver seat lever is disengaged.
Thanks in advance for any help.
Posted via Mobile Device

[lolife99]

I've been making new rods from braided steel cable and a small turnbuckle.
(for adjustment)
Like small garage door style cable and clips.

[russgoodman]

Originally Posted by lolife99

I've been making new rods from braided steel cable and a small turnbuckle.
(for adjustment)
Like small garage door style cable and clips.

Got pics?

[lolife99]

Originally Posted by russgoodman

Got pics?

No,... sorry.

[LockDoc]

-
Here is a thread that I posted some pics of the one in my '67 There are a few different configurations over the years but this may give you an idea how the rod fastens on the ends.

http://67-72chevytrucks.com/vboard/s...d.php?t=418802

LockDoc

[BugzC10]

Originally Posted by LockDoc

-
Here is a thread that I posted some pics of the one in my '67 There are a few different configurations over the years but this may give you an idea how the rod fastens on the ends.

http://67-72chevytrucks.com/vboard/s...d.php?t=418802

LockDoc

Thanks Doc....now to find the piece parts. The rod(wire) & springs can be fabbed and found, but the little gizmo that is held in place by the spring tension will be a challenge. ....guess that's why I bought the truck
May have to attempt fabricating the gizmo also
Posted via Mobile Device