![]() |
|
![]() |
#1 |
Registered User
Join Date: Jan 2000
Location: Wyoming USA
Posts: 2,445
|
Engine towers
Is therE any differance in the SBC TOWERS versus the I6 towers,I know the I6 are longer and wont use all the bolts per V-8.Does it make any differance in the way the motor will sit?I am in the 6cyl spot with 6 cyl towers I am upgrading trans to 700R4 and thought I would slide it in the v-8 spot using the 6 towers.Does it make the motor sit up higher or any reason why I can't use the 6 cyl. towers????
__________________
2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327 |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2010
Location: Ocean Springs, MS
Posts: 1,746
|
Re: Engine towers
I did exactly what you are planning on my truck, and it did not cause any problems. The 6 cylinder drive shaft even fit because the engine was moved forward, but the transmission is longer.
As for whether the V8 engine will end up in exactly the original location, I don't know. I do not have one to compare to, so would be interested to find out.
__________________
Gary 1971 Chevrolet C/10 1951 GMC 100 1977 GMC C15 1955 Chevrolet 3100 |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2000
Location: Wyoming USA
Posts: 2,445
|
Re: Engine towers
The HEDMAN headers I use are hitting the crosshaft a-arm bolt on drvs side.I allso replaced front engine cradle with a 74 model back in the day.Just thought I would do it right this time around but dont know if getting a set of SBC towers will help
__________________
2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327 |
![]() |
![]() |
![]() |
Bookmarks |
|
|