Worth restore a C-20 with 327 V8? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c20_truck · 02-22-2013, 07:15 PM

Is it worth Restoring a

C-20 with a 327 5.3L V8 engine? Not sure of the exact year but I want to try and buy it from my grandpa. he wanted 2,000 for it. (not for sale to other people though) he has gotten offers as high as 4k for it

Not going to resell it though. It has a little bit of body damage from two hit and runs while parked ,
It has the original rusted thew black plates (rusted to the point were the plate is nearly gone.

)
driver side fender (worse then the rear panel) and rear panel They also took off his step up.
there has been a few attempted thefts as well. (as you can see the bike lock on the hood ) windshield may need replacement since it;s scratched up from the window wiper but has all original glass on it.

The truck is in running condition. fuel gauge does not work though so you have to top it off after every trip. so you do not run out of gas

Ta2Don · 02-23-2013, 09:30 AM

Yes!!! I wouldn't hesitate at all. By all means keep it in the family.

c20_truck · 02-23-2013, 10:03 AM

Quote:

Originally Posted by Ta2Don

Yes!!! I wouldn't hesitate at all. By all means keep it in the family.

He got the truck for free on a job site, the owner no longer wanted it so they gave it to him.
So he got the truck and got paid. he used to be a hauler cleaning up lots/yards.

he used to have a 60's C60 dumper as well that one was sold since he retired. been in it once when I was kid.

FetchMeAPepsi · 02-23-2013, 10:24 AM

I agree, I'd jump right in that puppy and get started.

**aerotruk63** · 02-23-2013, 10:25 AM

Well worth if for the money and memories for the family.

flips72 · 02-23-2013, 10:35 AM

i would be all over that if i were you, especially since its your granpa's truck, looks solid too, should be a nice build.

luvbowties · 02-23-2013, 11:08 AM

"...fuel gauge does not work though so you have to top it off after every trip. so you do not run out of gas..."

Not a problem--that's about how much gas they used anyway

Sam

**MusicMan70** · 02-23-2013, 11:58 AM

So you must be Kareem Abdul Jabbar judging from the height of those shots

Roger, Over, Huh?

c20_truck · 02-23-2013, 01:43 PM

Quote:

Originally Posted by MusicMan70

So you must be Kareem Abdul Jabbar judging from the height of those shots

Roger, Over, Huh?

google maps I should be able to get some better shots when I go down tomorrow

markeb01 · 02-23-2013, 12:24 PM

If there is enough emotional attachment to keep something in the family, they are almost always worth restoring unless too far gone with rust or body damage. When first produced, the 327 was a magical number and the supreme hot rodders engine. There were very few power plants more desirable to own, so I wouldn't hesitate to keep it.

The easy way to see if the windshield can be saved is to run your fingernail over the scratches. If they cannot be detected, the glass can normally be polished out. If you can feel the scratches, it is unlikely the glass can be saved as so much would have to be removed it would end up wavy and no longer optically clear. Replacing the gas gauge, sender, and wiring is relatively easy and inexpensive, and most likely you wouldn’t need to replace all three to get it working again.

Good luck and welcome to the forum!

**jocko** · 02-25-2013, 10:10 PM

is it the ORIGINAL 327 or perhaps a car transplant? If orginal, then definitely worthy of a resto. I agree with Mark, keep it by all means, but resto-ability depends on the body and overall condition in my mind. With the original 327, this would be a nice resto. And I'd buy grandpa a pack of cigarettes or something and get him to come down on the price a bit... $2K and he may be laughin all the way to Saturday night bingo at your expense... If he's giving you a 50% discount - $1500-ish?? Is gramps on this site!!

let's shame him into givin you a break! Kinda kidding. Really, $2K is more than fair for this ol truck, again, especially if it's got the original 327. If there is no sheet metal under those attached kick plates/rust hiders (?) all up and down the lower sides of it... then $2K might be a bit steep.

quest · 02-26-2013, 02:23 PM

Yeah I wouldn't hesitate for a minute, definitely worth it, looks like a great foundation for a build project! That truck would sell as is for about $2000-$2500 here in my area.

MikeS. · 02-26-2013, 03:43 PM

If Gramps got it for free...how about 1K for it?
Posted via Mobile Device

oakstcustomz · 02-26-2013, 10:10 PM

thats a nice pickup! i had a chance to buy my grandpas truck after he passed...even though it was a d@dge i rode in that pickup with him when i was a kid...... i was 18 and dumb not to! got sold to some tweak who wrecked it! buy it and save the memories!!!! there is so much you can do with that truck!

factorystock · 02-23-2013, 07:56 PM

Interesting thread, Original poster wanted to see stock original 3/4 ton trucks, most are, some aren't. http://67-72chevytrucks.com/vboard/s...urvivor+trucks

c20_truck · 02-25-2013, 04:31 AM

Quote:

Originally Posted by factorystock

Interesting thread, Original poster wanted to see stock original 3/4 ton trucks, most are, some aren't. http://67-72chevytrucks.com/vboard/s...urvivor+trucks

here they are

the paint is not original

the original paint was baby blue with white on the top

one of the rims is not original as well since it flew off the truck on the freeway. That was due to a attempted theft of the rim. they could not get the last lug off. the truck escaped serious body damage. he never did find the wheel.

has the original head lights from the factory but the driver side has burned out due the the hit and run. while parked

02-22-2013, 07:15 PM	#1
c20_truck Registered User Join Date: Feb 2013 Location: Los Angeles Posts: 5	Worth restore a C-20 with 327 V8? Is it worth Restoring a C-20 with a 327 5.3L V8 engine? Not sure of the exact year but I want to try and buy it from my grandpa. he wanted 2,000 for it. (not for sale to other people though) he has gotten offers as high as 4k for it Not going to resell it though. It has a little bit of body damage from two hit and runs while parked , It has the original rusted thew black plates (rusted to the point were the plate is nearly gone. ) driver side fender (worse then the rear panel) and rear panel They also took off his step up. there has been a few attempted thefts as well. (as you can see the bike lock on the hood ) windshield may need replacement since it;s scratched up from the window wiper but has all original glass on it. The truck is in running condition. fuel gauge does not work though so you have to top it off after every trip. so you do not run out of gas Attached Images Last edited by c20_truck; 02-22-2013 at 07:37 PM.

02-23-2013, 09:30 AM	#2
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: Worth restore a C-20 with 327 V8? Yes!!! I wouldn't hesitate at all. By all means keep it in the family. __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

02-23-2013, 10:24 AM	#4
FetchMeAPepsi Registered User Join Date: Apr 2011 Location: Edmond, Ks Posts: 595	Re: Worth restore a C-20 with 327 V8? I agree, I'd jump right in that puppy and get started. __________________ Step by steps: Remove primer to reveal original paint Rebuild a carburetor See My Build - Cecilia! Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.

02-23-2013, 10:25 AM	#5
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Worth restore a C-20 with 327 V8? Well worth if for the money and memories for the family. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

02-23-2013, 10:35 AM	#6
flips72 Registered User Join Date: Jan 2008 Location: oldfort tn Posts: 1,183	Re: Worth restore a C-20 with 327 V8? i would be all over that if i were you, especially since its your granpa's truck, looks solid too, should be a nice build. __________________ my 65 fleetside build http://67-72chevytrucks.com/vboard/s...d.php?t=442370 big back glass conversion http://67-72chevytrucks.com/vboard/s...dow+conversion

02-23-2013, 11:08 AM	#7
luvbowties Registered User Join Date: Feb 2009 Location: southeasternfoothillsofusa Posts: 1,557	Re: Worth restore a C-20 with 327 V8? "...fuel gauge does not work though so you have to top it off after every trip. so you do not run out of gas..." Not a problem--that's about how much gas they used anyway Sam

02-23-2013, 11:58 AM	#8
MusicMan70 Senior Member Join Date: Feb 2011 Location: Corona, CA Posts: 1,842	Re: Worth restore a C-20 with 327 V8? So you must be Kareem Abdul Jabbar judging from the height of those shots Roger, Over, Huh? __________________ MusicMan70 1961 GMC Suburban

02-23-2013, 12:24 PM	#10
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: Worth restore a C-20 with 327 V8? If there is enough emotional attachment to keep something in the family, they are almost always worth restoring unless too far gone with rust or body damage. When first produced, the 327 was a magical number and the supreme hot rodders engine. There were very few power plants more desirable to own, so I wouldn't hesitate to keep it. The easy way to see if the windshield can be saved is to run your fingernail over the scratches. If they cannot be detected, the glass can normally be polished out. If you can feel the scratches, it is unlikely the glass can be saved as so much would have to be removed it would end up wavy and no longer optically clear. Replacing the gas gauge, sender, and wiring is relatively easy and inexpensive, and most likely you wouldn’t need to replace all three to get it working again. Good luck and welcome to the forum! __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

02-25-2013, 10:10 PM	#11
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: Worth restore a C-20 with 327 V8? is it the ORIGINAL 327 or perhaps a car transplant? If orginal, then definitely worthy of a resto. I agree with Mark, keep it by all means, but resto-ability depends on the body and overall condition in my mind. With the original 327, this would be a nice resto. And I'd buy grandpa a pack of cigarettes or something and get him to come down on the price a bit... $2K and he may be laughin all the way to Saturday night bingo at your expense... If he's giving you a 50% discount - $1500-ish?? Is gramps on this site!! let's shame him into givin you a break! Kinda kidding. Really, $2K is more than fair for this ol truck, again, especially if it's got the original 327. If there is no sheet metal under those attached kick plates/rust hiders (?) all up and down the lower sides of it... then $2K might be a bit steep.

02-26-2013, 02:23 PM	#12
quest Registered User Join Date: Dec 2012 Location: Edmonton Alberta Canada Posts: 51	Re: Worth restore a C-20 with 327 V8? Yeah I wouldn't hesitate for a minute, definitely worth it, looks like a great foundation for a build project! That truck would sell as is for about $2000-$2500 here in my area. __________________ 1965 One Ton GMC 4x4 project Have 3 trucks in my photo album, building them into one custom but original looking 4x4 dually reg cab pickup with 133" wheel base.

02-26-2013, 03:43 PM	#13
MikeS. Registered User Join Date: Sep 2011 Location: FarEastern WVa Posts: 1,691	Re: Worth restore a C-20 with 327 V8? If Gramps got it for free...how about 1K for it? Posted via Mobile Device __________________ Past Master Triluminar Lodge #117 GL of WVa My 1963 4x4 Suburban build; http://67-72chevytrucks.com/vboard/s...d.php?t=531274 My Gallery, now with pics of my 1966 C30 motorhome. http://67-72chevytrucks.com/gallery/...&ppuser=103447

02-26-2013, 10:10 PM	#14
oakstcustomz Registered User Join Date: Apr 2010 Location: Willits Ca Posts: 132	Re: Worth restore a C-20 with 327 V8? thats a nice pickup! i had a chance to buy my grandpas truck after he passed...even though it was a d@dge i rode in that pickup with him when i was a kid...... i was 18 and dumb not to! got sold to some tweak who wrecked it! buy it and save the memories!!!! there is so much you can do with that truck! __________________ 1965 Chevy C-20 slammed 292 L6 TH400 1967 Chevy C-20 on 91 suburban frame project(wife's) 1972 Chevy K-20 Mild 350/th350/np2o5 dd 1952 Ford Customline 2door kustom project 1967 Cadillac Superior Hearse (wife's) 1998 GMC Saffari (wife's dd)

02-23-2013, 07:56 PM	#15
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,396	Re: Worth restore a C-20 with 327 V8? Interesting thread, Original poster wanted to see stock original 3/4 ton trucks, most are, some aren't. http://67-72chevytrucks.com/vboard/s...urvivor+trucks Last edited by factorystock; 02-23-2013 at 08:02 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.