ACC Builds: 61 Parkwood Wagon & 67 Delmont - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ChiefRocka** · 03-03-2013, 10:36 AM

These are two different returning customers ...

The 61 is in for a fresh 350 and 700R4 swap (currently, a daily driven column 3-speed)
-
Previous work included some March products, Vintage A/C, and some other odds and ends.
-
Customer complaint was oil consumption. It idled and ran REALLY well, but a compression and leakdown tests yield two low cylinders.
-
So we opted for a NEW 290HP GM crate engine.
-
-

*
*
*
*
The 67 Olds 'Delmont' 88, low mileage, minor 'frame-on' build (suspension, wheels, engine detail, paint and interior)

**ChiefRocka** · 03-03-2013, 10:45 AM

61 leakdown ....
-
-

-
Blowby for days ....
-
-

-
-
Diassembly begins ....
-
-

-
-

**ChiefRocka** · 03-03-2013, 10:51 AM

-

-
A couple helpers on board.....
-

-

**ChiefRocka** · 03-03-2013, 10:55 AM

-

**ChiefRocka** · 03-03-2013, 11:05 AM

Off to SAN JOSE STEAM CLEAN for a cleaning ....
-
-

-

-
Rainstorm on the way back ... Filthy !
-

-
Washed next day ...
-

-

**ChiefRocka** · 03-03-2013, 11:17 AM

-
Strip compartment slightly .... Fenderwells previously coated ...
-

-

**lolife99** · 03-03-2013, 12:08 PM

You guys do good work!
Love the wagon!

72BlckButy · 03-03-2013, 01:41 PM

Love that wagon!!

It's only lowered with springs right? Air ride would take it to the next level.

67ChevyRedneck · 03-03-2013, 03:06 PM

I remember your moving thread, great to see you're busy! I LOVE that wagon!

**ChiefRocka** · 03-05-2013, 09:59 AM

Quote:

Originally Posted by lolife99

You guys do good work!
Love the wagon!

Quote:

Originally Posted by 72BlckButy

Love that wagon!!

It's only lowered with springs right? Air ride would take it to the next level.

Quote:

Originally Posted by 67ChevyRedneck

I remember your moving thread, great to see you're busy! I LOVE that wagon!

Thanks !! Yep, wagons are my favorite. I owned several '64 Impala Wagons and a '63 too.

The wagon has adjustable coilover in the front (stock A-arms) and stock cut springs and air-shocks in the rear. Evidently, this wagon did have air-ride once before.

**ChiefRocka** · 03-05-2013, 10:10 AM

-
Blue tape marks contact area spot on body. The return nipple had to be moved in order for stock straps to work. The return line enters the tank, and it tacked inside to the rear of the tank.
-
-
The line was relocated to the center, next to the fuel line:
-
-

-

-
Curved line to clear sender....
-

-

**ChiefRocka** · 03-05-2013, 10:30 AM

-

-
I used the MIG on the fuel neck...
-

-

-
Using the Leakdown Tester, I had this tank looking like a ballon ! Took care of a little pin-holes in the neck....
-

-

**ChiefRocka** · 03-05-2013, 10:39 AM

I used what I had available for contact area protection, in this case some knock-off DynaMat ... On the body itself, I had welded 1/4" strips along the bottom of the saddles, and a 1" tube across the back to get the tank to fit just right .... Matting was also applied there ....
-

-

-
Also, the carriage bolts were relocated rearward a tad. 7/8" access holes were drilled from inside the truck, in order to drop the carrriage bolts in thru support. Some stainless plugs will be used in truck....
-

-

Jonboy · 03-11-2013, 10:31 AM

Looks good. I would swap out that oil filter for a good one (like a delco or something) before you fire it, though.

**ChiefRocka** · 03-12-2013, 06:38 AM

Quote:

Originally Posted by Jonboy

Looks good. I would swap out that oil filter for a good one (like a delco or something) before you fire it, though.

I have a WIX that'll go on there.

Figure I'd screw something on there to keep it sealed.

Besides, I'm going to do 2 break oil changes anyway before I give it back to the customer.

03-03-2013, 10:36 AM	#1
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	ACC Builds: 61 Parkwood Wagon & 67 Delmont These are two different returning customers ... The 61 is in for a fresh 350 and 700R4 swap (currently, a daily driven column 3-speed) - Previous work included some March products, Vintage A/C, and some other odds and ends. - Customer complaint was oil consumption. It idled and ran REALLY well, but a compression and leakdown tests yield two low cylinders. - So we opted for a NEW 290HP GM crate engine. - - * * * * The 67 Olds 'Delmont' 88, low mileage, minor 'frame-on' build (suspension, wheels, engine detail, paint and interior) __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

03-03-2013, 10:45 AM	#2
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: ACC Builds: 61 Parkwood Wagon & 67 Delmont 61 leakdown .... - - - Blowby for days .... - - - - Diassembly begins .... - - - - - - - - - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

03-03-2013, 10:51 AM	#3
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: ACC Builds: 61 Parkwood Wagon & 67 Delmont - - A couple helpers on board..... - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

03-03-2013, 10:55 AM	#4
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: ACC Builds: 61 Parkwood Wagon & 67 Delmont - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

03-03-2013, 11:05 AM	#5
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: ACC Builds: 61 Parkwood Wagon & 67 Delmont Off to SAN JOSE STEAM CLEAN for a cleaning .... - - - - - Rainstorm on the way back ... Filthy ! - - Washed next day ... - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

03-03-2013, 11:17 AM	#6
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: ACC Builds: 61 Parkwood Wagon & 67 Delmont - Strip compartment slightly .... Fenderwells previously coated ... - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

03-03-2013, 12:08 PM	#7
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,702	Re: ACC Builds: 61 Parkwood Wagon & 67 Delmont You guys do good work! Love the wagon! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

03-03-2013, 01:41 PM	#8
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: ACC Builds: 61 Parkwood Wagon & 67 Delmont Love that wagon!! It's only lowered with springs right? Air ride would take it to the next level. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

03-03-2013, 03:06 PM	#9
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: ACC Builds: 61 Parkwood Wagon & 67 Delmont I remember your moving thread, great to see you're busy! I LOVE that wagon! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

03-05-2013, 10:10 AM	#11
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: ACC Builds: 61 Parkwood Wagon & 67 Delmont - Blue tape marks contact area spot on body. The return nipple had to be moved in order for stock straps to work. The return line enters the tank, and it tacked inside to the rear of the tank. - - The line was relocated to the center, next to the fuel line: - - - - - - - Curved line to clear sender.... - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" Last edited by ChiefRocka; 03-05-2013 at 11:02 AM.

03-05-2013, 10:30 AM	#12
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: ACC Builds: 61 Parkwood Wagon & 67 Delmont - - - - I used the MIG on the fuel neck... - - - Using the Leakdown Tester, I had this tank looking like a ballon ! Took care of a little pin-holes in the neck.... - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" Last edited by ChiefRocka; 03-05-2013 at 11:03 AM.

03-05-2013, 10:39 AM	#13
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: ACC Builds: 61 Parkwood Wagon & 67 Delmont I used what I had available for contact area protection, in this case some knock-off DynaMat ... On the body itself, I had welded 1/4" strips along the bottom of the saddles, and a 1" tube across the back to get the tank to fit just right .... Matting was also applied there .... - - - - Also, the carriage bolts were relocated rearward a tad. 7/8" access holes were drilled from inside the truck, in order to drop the carrriage bolts in thru support. Some stainless plugs will be used in truck.... - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" Last edited by ChiefRocka; 03-05-2013 at 11:04 AM.

03-11-2013, 10:31 AM	#14
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: ACC Builds: 61 Parkwood Wagon & 67 Delmont Looks good. I would swap out that oil filter for a good one (like a delco or something) before you fire it, though.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.