![]() |
|
![]() |
#1 |
Registered User
Join Date: Dec 2012
Location: Kansas
Posts: 29
|
Need help
I was wondering if anybody has ever put down replacement carpet. I put down the underlayment and got my holes cut in it for the seat, seat belts, and dim to bright switch. I was wondering how you went about cutting those holes for the seat, seat belts, and dim to bright switch into the carpet. Any help would be great thanks guys.
__________________
1972 Chevy C20 Pickup 1974 Plymouth Roadrunner 2009 GMC Sierra 2011 Chevy Equinox |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Apr 2000
Location: Bonne Terre, Mo
Posts: 3,005
|
Re: Need help
I used ACC carpet it had the dimmer switch hole reinforced and cut already. And the seat belts I simply removed them used a ice pick located the holes from under the cab making a hole to get the spot to reinstall the bolt into the belt. Same with seat bolts.
__________________
'69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629" |
![]() |
![]() |
![]() |
#3 |
the boat guy
Join Date: Jul 2007
Location: springfield mo
Posts: 2,339
|
Re: Need help
Razor for big holes, soldering iron for small holes.
Posted via Mobile Device
__________________
67, swb, fleet, tach, throttle, 5.3, 4l60e, 3.73's, fuel cell, 5 lug, p.d.b., 4-6 drop. great little truck 66, stevens drag/ski 18' silouette, 350, 2.02 doublehump heads. comp extreme marine 278 cam, vette 7 fin valve covers, old polished edelbrock intake, velvetdrive, casale v-drive, adj cavitation plate. 28, model a rpu project, |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
|
Re: Need help
A soldering pencil works great.
__________________
Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID ** Blazer SPID ** Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders ** Do you have a 1972 Plaid Pickup? ** Plaid Blazer ** Plaid Suburban |
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: May 2010
Location: Wisconsin & Arizona
Posts: 4,844
|
Re: Need help
There is an installation video on either ACC's or Stock Interior's (sells ACC) website that suggests using a hole saw IN REVERSE for the holes. I located where to put the holes with an ice pick as Sammy suggested above. Then I used the hole saw as in the video for the actual hole. It worked great. I believe I used a 3/4" hole saw (in reverse!). My carpet was ACC with the mass backing.
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Dec 2012
Location: Kansas
Posts: 29
|
Re: Need help
what about glueing it down?
__________________
1972 Chevy C20 Pickup 1974 Plymouth Roadrunner 2009 GMC Sierra 2011 Chevy Equinox |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
|
Re: Need help
No, not unless there is a specifc need.
__________________
Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID ** Blazer SPID ** Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders ** Do you have a 1972 Plaid Pickup? ** Plaid Blazer ** Plaid Suburban |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Dec 2012
Location: Kansas
Posts: 29
|
Re: Need help
just seems like it don't want to lay to flat.
__________________
1972 Chevy C20 Pickup 1974 Plymouth Roadrunner 2009 GMC Sierra 2011 Chevy Equinox |
![]() |
![]() |
![]() |
Bookmarks |
|
|