![]() |
|
![]() |
#1 |
Registered User
![]() Join Date: Mar 2011
Location: bolivar, mo
Posts: 839
|
Engine Cooling
I have a question on engine cooling and would like to hear any thoughts or especially experience.
My question is: Is a 4 core radiator really necessary? My 68 is going to have a relatively stock engine with the exception of a mild cam for more low end. The truck will have aftermarket heat and air and it will be a manual trans. The rear will be a 3.08 which will keep the R's low on the hiway. She will be mainly driven in warm weather and languish in the garage during the winters. Im wanting to use the three core I already have, install a shroud and a clutch fan. Didnt this combo work 40 years ago when the trucks were new? (or did it?) The p o of my truck had double 19" fans on the truck and still had trouble keeping it cool??
__________________
1997 shortie stepside 1968 short stepside 1966 mustang 1966 chevelle ss Dont always go the cheapest route--You can save yourself into the poorhouse! My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=489030 |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Sep 2012
Location: San Antonio, TX
Posts: 1,026
|
Re: Engine Cooling
I know all a/c trucks came with the 4 row radiator from the factory during those years. I personally always have 4 core radiators on my trucks. Nothing wrong with too big of a radiator. But I'm pretty positive a 3 row would work just fine.
Posted via Mobile Device
__________________
Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior |
![]() |
![]() |
![]() |
#3 |
Cluster King
![]() Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
|
Re: Engine Cooling
A 3 row should be just fine for your combination. 9 times out of 10, the radiator is not the cause of overheating issues.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Engine Cooling
4 core radiators are way overhyped overrated and overused// mostly just a severe case of monkey see monkey do
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jan 2001
Location: Orem, Utah
Posts: 8,021
|
Re: Engine Cooling
It sounds like you're building an engine. A new water pump and thermostat will go a long way to alleviating any concerns about overheating. Your 3-core will be fine, as long as it's in good shape. And make sure you have a shroud that fits properly. I don't think you'll have any problems.
|
![]() |
![]() |
![]() |
#6 |
20' Daredevil (Ret)
![]() Join Date: May 2003
Location: Jefferson State
Posts: 13,809
|
Re: Engine Cooling
Your 3-row will work just fine. My factory A/C K20 came with a 2-row and it did pretty well, but it ran a bit hot going up the mountain with a cord of green hardwood on a warm day -- didn't overheat, just ran hotter than usual. When the radiator finally failed, I replaced it with a 4-row to help eliminate any chance of running too hot.
__________________
- Mike - 1972 K20 LWB 350/350/205 RIP El Jay |
![]() |
![]() |
![]() |
#7 | |
Registered User
Join Date: Aug 2012
Location: error 404 location not found
Posts: 816
|
Re: Engine Cooling
Quote:
![]() Posted via Mobile Device
__________________
1995 s10 blazer 4.3 1967 c10 350/350 fleet short 1993 s10 blazer 4.3l 4l60 RIP 6/20/14 2000 mercury sable Thats a how I roll |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|