MA WTB-67-72 stepside bed SWB - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brewtality · 03-14-2013, 09:57 PM

Looking for a 67-72 short bed. Would like a step side but I would consider a fleet as well. Not having any luck in the northeast finding one so far.

Posted via Mobile Device

midniteblues · 03-15-2013, 07:45 AM

I have an extra ss bed down here in pa but i gotta say its rough but could be fixed if you have the ability.
I wouldnt know how to ship it you too you either

its missing the driver side fender but i have another workable one here for it

i would take $150 for it

i can give more pics later if needed

CC69Rat · 03-15-2013, 08:38 AM

I have one for sale that is darn near perfect. Rust free stuff, west coast fenders, etc. Has been media blasted, Epoxy primed and in PPG 2K primer right now. It needs a little final blocking and base / clear (your choice)

It's quite a ways a way from you though. Find one for say $400, fix the rust, blast it, buy PPG epoxy (DP) and the $150/gl primer. You'd easily have $800 in it plus your time. This one is ready to go, original wood bed. PM if you're interested but I think the distance would kill it for you. Pics in my Big Block 68 build. Steps go with it, tail lights, and the gate is a new Triplus repro.

bowtieboy2 · 03-15-2013, 04:05 PM

I have an excellent short step side bed for sale, has oak floor with new stainless strips and bolts,also chrome rear bumper for step bed.If interested call (502)396-9918 in kentucky.

brewtality · 03-21-2013, 09:47 AM

Man I wish you guys were closer. Has anyone ever had a bed shipped? If so, who and how much, etc?
Posted via Mobile Device

CC69Rat · 03-21-2013, 09:55 AM

Prob 1,000 miles for mine.. I bet theyre rusty up your way?

If it helped I could meet you somewhere on 81. Roanoke maybe?

Prob still too far, KY might be the best option for you. Im in no hurry and I will help you any way I can.
Posted via Mobile Device

brewtality · 03-21-2013, 10:06 AM

Quote:

Originally Posted by CC69Rat

Prob 1,000 miles for mine.. I bet theyre rusty up your way?

If it helped I could meet you somewhere on 81. Roanoke maybe?

Prob still too far, KY might be the best option for you. Im in no hurry and I will help you any way I can.
Posted via Mobile Device

I would consider a rusty one. I can't even find that up here. I looked it up and it was 14 hours to you. I am willing to travel some but 14 hours is just a bit to much. I will have to wait for the weather to break a bit and convince the wife to make a road trip. I just may take you up on that. Thanks, Ron
Posted via Mobile Device

perro13 · 03-21-2013, 10:13 AM

Quote:

Originally Posted by brewtality

I would consider a rusty one. I can't even find that up here. I looked it up and it was 14 hours to you. I am willing to travel some but 14 hours is just a bit to much. I will have to wait for the weather to break a bit and convince the wife to make a road trip. I just may take you up on that. Thanks, Ron
Posted via Mobile Device

i have this one if you can figure out shipping
http://67-72chevytrucks.com/vboard/s...d.php?t=570555

CC69Rat · 03-21-2013, 10:13 AM

Still a huge haul to Roanoke, .. but (?) Even if its a few months, just know theres one in Chatt.

Posted via Mobile Device

oldno7 · 03-23-2013, 12:23 AM

I might be selling a longbed to board member (bekeman) he's from pa im in Il I'm thinkin he may be coming down to pick it up. He's gonna check with his boss next week It's a 14 hr drive I also have 2 short stepsides for sale. It would be awesome if u guys out east could work together and get these beds from us midwest guys. Anything i can do let me no If you buy one from another member down south Mo Kentucky or Tenn maybe we can work on getting them here to Il for transport I also no where thr are 2 other good 8 ft beds available

midniteblues · 03-23-2013, 10:36 AM

heres a couple pics for ya Like i said this bed is rough but it can be worked if your willing.
the worst parts are the bottom of the bedsides below the angle strip needs attentions the area where the steps meet the fender need attention, and the cross rails have some holes the front bed panel has surface rust but its still solid. I bought this bed just for the driverside fender witch i did not get off yet but i have another that allready has some rust repair done to it for this bed if wanted also have a rough tail gate too.

I think bekeman emailed me asking for a bed but i dont have any 8' fleets right now

brewtality · 04-01-2013, 12:10 PM

bump

Jmiller022 · 07-04-2013, 10:17 AM

I know it's been a couple months, but did you ever find one?

I'm also looking for a stepside as well near GA! If anyone has one.
Posted via Mobile Device

03-14-2013, 09:57 PM	#1
brewtality Registered User Join Date: Apr 2011 Location: Holland, MA Posts: 57	WTB-67-72 stepside bed SWB Looking for a 67-72 short bed. Would like a step side but I would consider a fleet as well. Not having any luck in the northeast finding one so far. Posted via Mobile Device

03-15-2013, 07:45 AM	#2
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: WTB-67-72 stepside bed SWB I have an extra ss bed down here in pa but i gotta say its rough but could be fixed if you have the ability. I wouldnt know how to ship it you too you either its missing the driver side fender but i have another workable one here for it i would take $150 for it i can give more pics later if needed Attached Images __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.

03-15-2013, 08:38 AM	#3
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,212	Re: WTB-67-72 stepside bed SWB I have one for sale that is darn near perfect. Rust free stuff, west coast fenders, etc. Has been media blasted, Epoxy primed and in PPG 2K primer right now. It needs a little final blocking and base / clear (your choice) It's quite a ways a way from you though. Find one for say $400, fix the rust, blast it, buy PPG epoxy (DP) and the $150/gl primer. You'd easily have $800 in it plus your time. This one is ready to go, original wood bed. PM if you're interested but I think the distance would kill it for you. Pics in my Big Block 68 build. Steps go with it, tail lights, and the gate is a new Triplus repro. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

03-15-2013, 04:05 PM	#4
bowtieboy2 Registered User Join Date: Jul 2012 Location: mt.washington,ky Posts: 13	Re: WTB-67-72 stepside bed SWB I have an excellent short step side bed for sale, has oak floor with new stainless strips and bolts,also chrome rear bumper for step bed.If interested call (502)396-9918 in kentucky.

03-21-2013, 09:47 AM	#5
brewtality Registered User Join Date: Apr 2011 Location: Holland, MA Posts: 57	Re: WTB-67-72 stepside bed SWB Man I wish you guys were closer. Has anyone ever had a bed shipped? If so, who and how much, etc? Posted via Mobile Device

03-21-2013, 09:55 AM	#6
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,212	Re: WTB-67-72 stepside bed SWB Prob 1,000 miles for mine.. I bet theyre rusty up your way? If it helped I could meet you somewhere on 81. Roanoke maybe? Prob still too far, KY might be the best option for you. Im in no hurry and I will help you any way I can. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

03-21-2013, 10:13 AM	#9
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,212	Re: WTB-67-72 stepside bed SWB Still a huge haul to Roanoke, .. but (?) Even if its a few months, just know theres one in Chatt. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

03-23-2013, 12:23 AM	#10
oldno7 Registered User Join Date: Jan 2007 Location: Ill. Posts: 584	Re: WTB-67-72 stepside bed SWB I might be selling a longbed to board member (bekeman) he's from pa im in Il I'm thinkin he may be coming down to pick it up. He's gonna check with his boss next week It's a 14 hr drive I also have 2 short stepsides for sale. It would be awesome if u guys out east could work together and get these beds from us midwest guys. Anything i can do let me no If you buy one from another member down south Mo Kentucky or Tenn maybe we can work on getting them here to Il for transport I also no where thr are 2 other good 8 ft beds available __________________ Hi everyone, It's nice to know there's other people just as crazy about these old trucks as I am. oldno7

03-23-2013, 10:36 AM	#11
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: WTB-67-72 stepside bed SWB heres a couple pics for ya Like i said this bed is rough but it can be worked if your willing. the worst parts are the bottom of the bedsides below the angle strip needs attentions the area where the steps meet the fender need attention, and the cross rails have some holes the front bed panel has surface rust but its still solid. I bought this bed just for the driverside fender witch i did not get off yet but i have another that allready has some rust repair done to it for this bed if wanted also have a rough tail gate too. I think bekeman emailed me asking for a bed but i dont have any 8' fleets right now Attached Images __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.

04-01-2013, 12:10 PM	#12
brewtality Registered User Join Date: Apr 2011 Location: Holland, MA Posts: 57	Re: WTB-67-72 stepside bed SWB bump

07-04-2013, 10:17 AM	#13
Jmiller022 Registered User Join Date: Apr 2013 Location: Douglasville, Ga Posts: 212	Re: WTB-67-72 stepside bed SWB I know it's been a couple months, but did you ever find one? I'm also looking for a stepside as well near GA! If anyone has one. Posted via Mobile Device __________________ 68' c10 stepper 5.3/4L60e Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=578917



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.