flowmaster complete exhaust systems?

[weider1717]

does flowmaster make a system for a k10 that bolts directly to the exhaust manifolds all the way back?

i know i paid over $400 for dual super 44 system and I didn't get an x pipe or h pipe and they cut off my original exhaust a few inches down from where it bolts to the exhaust manifolds and welded the 2.5" pipe onto the smaller pipes.......

I don't like this at all and it will cost me to change the system but I want a NICE setup. Is there such a kit out there? maybe I could install it myself.

i've looked but only see partial kits none on the end where it bolts to the manifolds.

[Aaron_L]

Most aftermarket exhausts for older vehicles are intentionally left incomplete on the front because of the ton of engine/trans/motor mounts/manifold/header combinations they have seen over the years, and to keep costs down for the manufacturer because there are less part numbers to make.

That's pretty crappy that the exhaust shop didn't make new lead pipes when they did your exhaust.