Cab mounts, Rubber or Polyurethane? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

northerngmc · 04-08-2013, 11:54 AM

Is there any advantage to using polyurethane cab mounts?

http://www.ebay.ca/itm/Energy-Suspen...6df9b3&vxp=mtr

I need to replace the rubbers on my 68 C20 and I am looking at stock vs poly.

Rufton · 04-08-2013, 12:10 PM

OEM grade rubber lasts decades so that's what I'd buy.

Poly lasts also but it's too stiff for many non-performance applications.

**LockDoc** · 04-08-2013, 10:06 PM

Quote:

Originally Posted by Rufton

OEM grade rubber lasts decades so that's what I'd buy.

Poly lasts also but it's too stiff for many non-performance applications.

-
Yep, rubber for me too...

LockDoc

northerngmc · 04-08-2013, 03:09 PM

Thanks, I will order a set of rubber.

**special-K** · 04-08-2013, 10:56 PM

Rubber. These trucks were made right the first time. Poly body mounts barely cushion and that's the purpose of body mounts

weever82 · 04-09-2013, 09:53 AM

I also asked this question and went with rubber, very pleased that I did!
Posted via Mobile Device

northerngmc · 04-09-2013, 10:57 AM

I ordered rubber last night. Now I will wait a week and then get at changing them.

I ordered a full set of mounts, front and rear cab and rad support.

**cericd** · 04-09-2013, 12:13 PM

Those of you that went rubber, who's kit do you recommend? I need a new set too.

Tillik · 04-09-2013, 02:58 PM

Im interested as well. I found some on various sites.

**cericd** · 04-11-2013, 11:09 AM

Quote:

Originally Posted by cericd

Those of you that went rubber, who's kit do you recommend? I need a new set too.

Anyone???

Which company has the best and most complete, rubber cab mount kit?

Longhorn 70 · 04-11-2013, 11:11 AM

Quote:

Originally Posted by cericd

Anyone???

Which company has the best and most complete, rubber cab mount kit?

While I was doing research, it appeared that GMC Paul's had the most complete kit for mounting.

I chose to go to a local company for expediency though.

MSHax · 04-11-2013, 12:54 PM

It all depends on what your purpose for the truck is. Like a few have said, the poly mounts are insanely stiff, that's done on purpose. Want to do some pro-touring? Go poly! Want to drive down the freeway? Go rubber! Most of my cars are drag builds, I want everything to stay in place and move only when told, I go poly. My truck is something for me to enjoy everyday, rubber without a doubt.

If you're going poly, energy suspension is great in my opinion. They held up fine, even when dragging along a wall at 138mph. For rubber mounts, factory grade is by far the best, but there don't seem to be many people making them. I wish I could be more help with the rubber mounts, but I have mostly gone poly, or factory. I would suggest LMC since I bought a set for a project back in the day, but I can't really say anything about them since I sold the car right after putting them on. Plus I've heard some people complain about LMC and them cracking. All I do know is that I would NEVER put some ebay cheapos on my truck!

c10srule · 04-11-2013, 01:02 PM

we have poly on all ours and dont get the harsh ride everyone is talking about, my wifes truck is the smoothest riding old truck ive ridden in.

Rufton · 04-11-2013, 02:34 PM

Quote:

Originally Posted by c10srule

we have poly on all ours and dont get the harsh ride everyone is talking about, my wifes truck is the smoothest riding old truck ive ridden in.

I can buy that.
Poly is much stiffer than rubber but you may have relatively low rate springs, reasonable tires, soft seats, etc to help absorb the bounces.

04-08-2013, 11:54 AM	#1
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Cab mounts, Rubber or Polyurethane? Is there any advantage to using polyurethane cab mounts? http://www.ebay.ca/itm/Energy-Suspen...6df9b3&vxp=mtr I need to replace the rubbers on my 68 C20 and I am looking at stock vs poly. __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

04-08-2013, 12:10 PM	#2
Rufton Registered User Join Date: Apr 2013 Location: Knoxville TN Posts: 1,170	Re: Cab mounts, Rubber or Polyurethane? OEM grade rubber lasts decades so that's what I'd buy. Poly lasts also but it's too stiff for many non-performance applications.

04-08-2013, 03:09 PM	#4
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Re: Cab mounts, Rubber or Polyurethane? Thanks, I will order a set of rubber. __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

04-08-2013, 10:56 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Cab mounts, Rubber or Polyurethane? Rubber. These trucks were made right the first time. Poly body mounts barely cushion and that's the purpose of body mounts __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-09-2013, 09:53 AM	#6
weever82 Registered User Join Date: Sep 2012 Location: Queen Creek, AZ Posts: 551	Re: Cab mounts, Rubber or Polyurethane? I also asked this question and went with rubber, very pleased that I did! Posted via Mobile Device __________________ Weev- Life's tough...... It's even tougher when your stupid - John Wayne

04-09-2013, 10:57 AM	#7
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Re: Cab mounts, Rubber or Polyurethane? I ordered rubber last night. Now I will wait a week and then get at changing them. I ordered a full set of mounts, front and rear cab and rad support. __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

04-09-2013, 12:13 PM	#8
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,155	Re: Cab mounts, Rubber or Polyurethane? Those of you that went rubber, who's kit do you recommend? I need a new set too. __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

04-09-2013, 02:58 PM	#9
Tillik Registered User Join Date: Sep 2012 Location: Layton, Utah Posts: 186	Re: Cab mounts, Rubber or Polyurethane? Im interested as well. I found some on various sites. __________________ James B. 1967 Chevy Fleetside Shortbed 4X2 (Black & Beautiful) 1971 Chevy Fleetside Shortbed 4X4 (White & Rough)

04-11-2013, 12:54 PM	#12
MSHax Registered User Join Date: Mar 2013 Location: Oakland, Ca. Posts: 135	Re: Cab mounts, Rubber or Polyurethane? It all depends on what your purpose for the truck is. Like a few have said, the poly mounts are insanely stiff, that's done on purpose. Want to do some pro-touring? Go poly! Want to drive down the freeway? Go rubber! Most of my cars are drag builds, I want everything to stay in place and move only when told, I go poly. My truck is something for me to enjoy everyday, rubber without a doubt. If you're going poly, energy suspension is great in my opinion. They held up fine, even when dragging along a wall at 138mph. For rubber mounts, factory grade is by far the best, but there don't seem to be many people making them. I wish I could be more help with the rubber mounts, but I have mostly gone poly, or factory. I would suggest LMC since I bought a set for a project back in the day, but I can't really say anything about them since I sold the car right after putting them on. Plus I've heard some people complain about LMC and them cracking. All I do know is that I would NEVER put some ebay cheapos on my truck! __________________ I stopped adding up how much I spend on my builds, it only makes me doubt my sanity knowing I've spent more than 9 times it's original value new.

04-11-2013, 01:02 PM	#13
c10srule Registered User Join Date: Oct 2012 Location: oran,mo. Posts: 171	Re: Cab mounts, Rubber or Polyurethane? we have poly on all ours and dont get the harsh ride everyone is talking about, my wifes truck is the smoothest riding old truck ive ridden in.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.