|
|
|
04-14-2013, 01:01 PM
|
#1 |
|
Registered User
Join Date: Apr 2013
Location: lexington ky
Posts: 9
|
timing ona 235
i know about the BB on flywheel and know about the oct setting on bottom of dizzy ,, now i have mine set on 0 is above the pointer advanced or below ?? min is set about 1/8 to 1/4 above the pointer , what is that , i am having trouble with running a tad bit hot
thanks |
|
|
|
04-14-2013, 03:02 PM
|
#2 |
|
Registered User
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
|
Re: timing ona 235
Distributor turns clockwise (same as firing order of plug wires), so turning it counter clockwise (against the rotation) advances timing.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project |
|
|
|
|
04-14-2013, 03:34 PM
|
#3 |
|
Registered User
Join Date: Sep 2012
Location: Oregon
Posts: 3,303
|
Re: timing ona 235
+1. It sounds like you are advanced. Set it below
Posted via Mobile Device |
|
|
|
|
04-14-2013, 03:42 PM
|
#4 |
|
Registered User
Join Date: Apr 2013
Location: lexington ky
Posts: 9
|
Re: timing ona 235
i think i am real close ,, now the BB is just a hair below the pointer ,,1/8 or so ,, i think it has more power and starts real well
thanks |
|
|
|
|
04-15-2013, 12:19 AM
|
#5 |
|
Hollister Road Co.
Join Date: Apr 2005
Location: Houston
Posts: 6,134
|
Re: timing ona 235
To correctly time a 235.
loosen the vacuum advance bolt in the block and line up the dash stamped into the block with the 0 on the vacuum advance plate, tighten the bolt. Then loosen the vacuum advance clamp on the distributor disconnect the tube to the vacuum unit. Using a timing light bring the pointer to dead center of the BB. It is now properly timed. If you want to advance the timing loosen the block bolt and advance it there. No light needed. This is actually called an octane selector. |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
