|
|
|
04-25-2013, 06:24 PM
|
#1 |
|
Registered User
Join Date: Oct 2012
Location: Pollock Pines
Posts: 23
|
Question on Price
I am just trying to find out how much a complete ms465 np205 conversion
from automatic with the following should run in unknown condition ms465 np205 bell housing fork pedal assembly pivot point
__________________
“Logic will get you from A to Z; imagination will get you everywhere.” 
|
|
|
|
04-25-2013, 10:38 PM
|
#2 |
|
Senior Member
Join Date: Nov 2005
Location: northwestern wi
Posts: 2,111
|
Re: Question on Price
i would buy a doner truck to be sure to get everything needed. any other way will cost you a fourtune trying to gather all the hardware and whatnot.if done properly you can profit from the experiance
__________________
common sense isn't so common anymore |
|
|
|
|
04-26-2013, 06:32 AM
|
#3 |
|
1969 Custom 30 wrecker
Join Date: Sep 2001
Location: Pottsville, Pa
Posts: 2,611
|
Re: Question on Price
Any good junkyards near you? If your lucky, you might find a truck with all those parts on. Then you could see how it all goes together too. (although it's not complicated)
I would guess if I could find all those parts in a yard around here, probably $150-200+? (give or take) All depends on what yard you go to.
__________________
Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10 |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
