Blazer Sun Visor Brackets, Are These Right? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BigRed76 · 04-28-2013, 04:01 PM

I got these sun visor brackets with some other parts, and I dont know enough about the blazers, but are these the correct length or have they been shortened? The rods are 15" long

BigRed76 · 05-05-2013, 01:40 PM

Anyone?

turp mcspray · 05-05-2013, 04:37 PM

Just measured some, and came up with about 21 3/4".

BigRed76 · 05-05-2013, 06:11 PM

Dang. I wonder why somebody would've shortened them.
Posted via Mobile Device

bouncytruck · 05-06-2013, 11:36 AM

I can't tell from the photo, but the Blazer visor brackets have a place to thread a bolt through to hold the hard top down.

cleszkie · 05-06-2013, 01:13 PM

They have definitely been modified in some way. A stock bracket does not have a point at the end of the rod.

**truckster** · 05-06-2013, 03:33 PM

They look like the right ones. The rod doesn't go all the way through the visor; the piece that sticks out the end is actually a separate piece.

I just pulled mine apart to replace the visors. I can post a pic later if you'd like.

SONOSADSACK · 05-06-2013, 07:36 PM

x2 with truckster. I just took mine apart for replacement as well

BigRed76 · 05-07-2013, 12:07 AM

Quote:

Originally Posted by truckster

They look like the right ones. The rod doesn't go all the way through the visor; the piece that sticks out the end is actually a separate piece.

I just pulled mine apart to replace the visors. I can post a pic later if you'd like.

That's good to know. I was just planning on selling them anyways since I dont have a blazer or know anyone with a blazer.

GuyO · 05-20-2013, 12:08 AM

Yes they are. I cut mine to get the bolt out of the nut imbedded in the double wall top (nut kept spinning). I planned to use the wire feeder and weld the rods back together but if your are available for a reasonable price I will make you an offer! Guy.

cleszkie · 05-20-2013, 12:18 PM

Interesting to hear that some of these visors didn't have a rod that goes all the way through. The rod on my visors is one piece and goes all the way through.

red71cheyenne · 05-24-2013, 03:34 PM

That is strange that they would be different. Mine are two piece. There is a metal bar that wraps around the middle and connects the two pieces together to make it the right length.

BigRed76 · 05-24-2013, 08:44 PM

Quote:

Originally Posted by GuyO

Yes they are. I cut mine to get the bolt out of the nut imbedded in the double wall top (nut kept spinning). I planned to use the wire feeder and weld the rods back together but if your are available for a reasonable price I will make you an offer! Guy.

You can have them if you pay for the shipping...

dujobu · 06-14-2014, 09:11 PM

So I ordered replacement 'as original' sun visors and they are a different style than my originals and they won't mount up because the mounting holes are different. The originals are the same as the ones in the photo at the top of this thread. And the replacements are like these…

What am I missing here? Why are they different?

briank · 06-15-2014, 10:38 AM

Those you pictured are for a truck, you cannot get new visor brackets for a blazer that I know of.

bouncytruck · 06-15-2014, 12:26 PM

Quote:

Originally Posted by briank

Those you pictured are for a truck, you cannot get new visor brackets for a blazer that I know of.

You might be able to rebuild the originals with the correct length arms from the repops.

BrianBethke · 03-05-2016, 06:08 PM

Are the 69-72 K5 sunvisor brackets meant to remain on the winsheild when the top is off?

Got Sand · 03-06-2016, 12:06 AM

Quote:

Originally Posted by BrianBethke

Are the 69-72 K5 sunvisor brackets meant to remain on the winsheild when the top is off?

Yes

preciador6 · 04-22-2016, 02:01 PM

I have 2 sets been holding on to this for years now.

chad75 · 04-22-2016, 03:46 PM

Quote:

Originally Posted by preciador6

I have 2 sets been holding on to this for years now.

Got any pictures? and what do you want for them???

preciador6 · 04-22-2016, 03:49 PM

Quote:

Originally Posted by chad75

Got any pictures? and what do you want for them???

Not selling at the moment there is 2 sets on EBay.

chad75 · 03-05-2016, 06:12 PM

Quote:

Originally Posted by BigRed76

I got these sun visor brackets with some other parts, and I dont know enough about the blazers, but are these the correct length or have they been shortened? The rods are 15" long

If they are not gone, I will pay shipping? chad59@gmail.com

preciador6 · 04-22-2016, 04:11 PM

http://www.ebay.com/itm/1969-1972-Ch...dW3Yvz&vxp=mtr

BrianBethke · 04-22-2016, 05:47 PM

No. Those are for a truck.

hemi43 · 04-22-2016, 04:39 PM

Holy crap !! $145 US is like $200 CND... Someone is getting a bit greedy. I needed a set for my Blazer and got 2 nice ones from Bill's trucks for $50 CND.

04-28-2013, 04:01 PM	#1
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Blazer Sun Visor Brackets, Are These Right? I got these sun visor brackets with some other parts, and I dont know enough about the blazers, but are these the correct length or have they been shortened? The rods are 15" long Attached Images __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

05-05-2013, 01:40 PM	#2
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: Blazer Sun Visor Brackets, Are These Right? Anyone? __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

05-05-2013, 04:37 PM	#3
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: Blazer Sun Visor Brackets, Are These Right? Just measured some, and came up with about 21 3/4". __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

05-05-2013, 06:11 PM	#4
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: Blazer Sun Visor Brackets, Are These Right? Dang. I wonder why somebody would've shortened them. Posted via Mobile Device __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

05-06-2013, 11:36 AM	#5
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Re: Blazer Sun Visor Brackets, Are These Right? I can't tell from the photo, but the Blazer visor brackets have a place to thread a bolt through to hold the hard top down. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

05-06-2013, 01:13 PM	#6
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: Blazer Sun Visor Brackets, Are These Right? They have definitely been modified in some way. A stock bracket does not have a point at the end of the rod.

05-06-2013, 03:33 PM	#7
truckster Senior Member Join Date: Jan 2001 Location: Orem, Utah Posts: 7,866	Re: Blazer Sun Visor Brackets, Are These Right? They look like the right ones. The rod doesn't go all the way through the visor; the piece that sticks out the end is actually a separate piece. I just pulled mine apart to replace the visors. I can post a pic later if you'd like.

05-06-2013, 07:36 PM	#8
SONOSADSACK Registered User Join Date: Mar 2009 Location: Michigan Posts: 301	Re: Blazer Sun Visor Brackets, Are These Right? x2 with truckster. I just took mine apart for replacement as well

05-20-2013, 12:08 AM	#10
GuyO Registered User Join Date: Nov 2011 Location: Kirkland, WA Posts: 343	Re: Blazer Sun Visor Brackets, Are These Right? Yes they are. I cut mine to get the bolt out of the nut imbedded in the double wall top (nut kept spinning). I planned to use the wire feeder and weld the rods back together but if your are available for a reasonable price I will make you an offer! Guy.

05-20-2013, 12:18 PM	#11
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: Blazer Sun Visor Brackets, Are These Right? Interesting to hear that some of these visors didn't have a rod that goes all the way through. The rod on my visors is one piece and goes all the way through.

05-24-2013, 03:34 PM	#12
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Blazer Sun Visor Brackets, Are These Right? That is strange that they would be different. Mine are two piece. There is a metal bar that wraps around the middle and connects the two pieces together to make it the right length. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

06-14-2014, 09:11 PM	#14
dujobu Registered User Join Date: Jul 2010 Location: Wilmington, DE Posts: 639	Re: Blazer Sun Visor Brackets, Are These Right? So I ordered replacement 'as original' sun visors and they are a different style than my originals and they won't mount up because the mounting holes are different. The originals are the same as the ones in the photo at the top of this thread. And the replacements are like these… What am I missing here? Why are they different?

06-15-2014, 10:38 AM	#15
briank Registered User Join Date: Sep 2011 Location: Leland, Il Posts: 1,503	Re: Blazer Sun Visor Brackets, Are These Right? Those you pictured are for a truck, you cannot get new visor brackets for a blazer that I know of.

03-05-2016, 06:08 PM	#17
BrianBethke Registered User Join Date: Aug 2015 Location: Boise, ID Posts: 13	Re: Blazer Sun Visor Brackets, Are These Right? Are the 69-72 K5 sunvisor brackets meant to remain on the winsheild when the top is off?

04-22-2016, 02:01 PM	#19
preciador6 Registered User Join Date: Dec 2013 Location: So Cal Posts: 681	Re: Blazer Sun Visor Brackets, Are These Right? I have 2 sets been holding on to this for years now.



Register or Log In To remove these advertisements.

04-22-2016, 04:11 PM	#23
preciador6 Registered User Join Date: Dec 2013 Location: So Cal Posts: 681	Re: Blazer Sun Visor Brackets, Are These Right? http://www.ebay.com/itm/1969-1972-Ch...dW3Yvz&vxp=mtr

04-22-2016, 05:47 PM	#24
BrianBethke Registered User Join Date: Aug 2015 Location: Boise, ID Posts: 13	Re: Blazer Sun Visor Brackets, Are These Right? No. Those are for a truck.

04-22-2016, 04:39 PM	#25
hemi43 Registered User Join Date: Mar 2015 Location: Ontario Canada Posts: 1,503	Re: Blazer Sun Visor Brackets, Are These Right? Holy crap !! $145 US is like $200 CND... Someone is getting a bit greedy. I needed a set for my Blazer and got 2 nice ones from Bill's trucks for $50 CND.

Register or Log In To remove these advertisements.