|
|
|
05-07-2013, 06:47 PM
|
#1 |
|
Registered User
 Join Date: Dec 2009
Location: mohave valley az
Posts: 23
|
Drive shaft ?
67 c10 has a 250 ci w/3 speed. going to install a 350 w/ th400 who makes or knows what size shaft i need as in length.
|
|
|
|
05-07-2013, 07:24 PM
|
#2 |
|
the boat guy
Join Date: Jul 2007
Location: springfield mo
Posts: 2,339
|
Re: Drive shaft ?
You do.
Measure your truck, everything installed, at ride height. One piece, tailshaft to center of rear ujoint. Two piece, tailshaft to center of carrier bearing, center of carrier bearing to center of rear ujoint. Way too many chassis lengths, motor mounts, motor mount positions to trust a measurement from somebody with a simmilar truck. Posted via Mobile Device
__________________
67, swb, fleet, tach, throttle, 5.3, 4l60e, 3.73's, fuel cell, 5 lug, p.d.b., 4-6 drop. great little truck 66, stevens drag/ski 18' silouette, 350, 2.02 doublehump heads. comp extreme marine 278 cam, vette 7 fin valve covers, old polished edelbrock intake, velvetdrive, casale v-drive, adj cavitation plate. 28, model a rpu project, |
|
|
|
|
05-07-2013, 07:58 PM
|
#3 |
|
Registered User
Join Date: Dec 2009
Location: mohave valley az
Posts: 23
|
Re: Drive shaft ?
thanks brad man 72
|
|
|
|
|
05-07-2013, 09:58 PM
|
#4 |
|
Registered User
Join Date: Feb 2013
Location: cedar park texas
Posts: 31
|
Re: Drive shaft ?
I have a 350 w a turbo 400 in my 68. I had the driveshaft cut to 54.5" from center to center.
Posted via Mobile Device |
|
|
|
|
05-08-2013, 09:11 AM
|
#5 |
|
Registered User
Join Date: Apr 2000
Location: Bonne Terre, Mo
Posts: 3,005
|
Re: Drive shaft ?
Use Brad's advice he does this for a living.
__________________
'69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629" |
|
|
|
|
05-09-2013, 11:49 AM
|
#6 | |
|
the boat guy
Join Date: Jul 2007
Location: springfield mo
Posts: 2,339
|
Re: Drive shaft ?
Quote:
Tailshaft to center of 1st ujoint should be 2.5" so if you want a center to center measurement just subtract 2.5" from your tailshaft measurement. In general a tailshaft measurement is better when having a shaft built because not all trans yokes are the same. Posted via Mobile Device
__________________
67, swb, fleet, tach, throttle, 5.3, 4l60e, 3.73's, fuel cell, 5 lug, p.d.b., 4-6 drop. great little truck 66, stevens drag/ski 18' silouette, 350, 2.02 doublehump heads. comp extreme marine 278 cam, vette 7 fin valve covers, old polished edelbrock intake, velvetdrive, casale v-drive, adj cavitation plate. 28, model a rpu project, |
|
|
|
|
|
05-08-2013, 09:18 AM
|
#7 |
|
Registered User
 
Join Date: Jan 2011
Location: Chattanooga TN
Posts: 6,210
|
Re: Drive shaft ?
Ex. Big block, TH400, 73-87 Kmember swap and custom mounts. My drive shaft is 55 1/4" long, Tailshaft to center. (the best I can recall) Spicer Ujoints. 4/6 drop.
But, .. your truck will likely be different. I'd measure it as Brad mentions, absolutely.
__________________
Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 *Currently underway* 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet *Sold* 1985 Silverado Short Fleet *Sold* 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride) |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
