71 C30 dually restoration

[gwars1306]

This is a title I posted a while ago with no pics here's a few of the truck when i bought it April of 2011 and some pics of what I've done so far swapped stock 350/th400 for 2006 lq9/4l80e from Chevy Silverado SS semi truck 22.5 fronts machinched down to 22s rear super singles 22,5 8-10 lug adapters it was a drive by wire but i sent the pcm back to have it flashed to a throttle cable the truck started up fine but when i gave it gas it would rev but as the pedal went down the throttle would stop and there was no more acceleration so after trying to figure it out i just decided to do away with the electric pedal i'm just waited for the pcm and pigtails for the new throttle.

[gwars1306]

few more pics more up to date

[gwars1306]

I cut the medal from the bottom to match up with the bottom of the truck from and the top I wanted it to be about one inch over the tallest point of the original frame I'm going to add some lbrackets that run along side of the quarter inch steal for suppport of the diamond plated bed I'm going to build and my hidden sneeker wheel lift tow unit will be mounted to the frame under the bed.

[gwars1306]

This is a picture of what the tow lift will look like under the bed of my truck when its mounted.

[rambler]

subscribed,, some great work already done...

[gwars1306]

Thanks I'm about 1 1/2 years into the build along with a good friend of mines all done in the backyard

[oldno7]

Subscribed! I'm looking for ideas and some more info on your rim and tire setup. No rush though im unable to start my project for a year

[gwars1306]

pics of the frame

[gwars1306]

Frame already had holes in it so I just drilled holes into my reinforcement medal and bolted it to the frame like that.

[gwars1306]

Another shot from the back

[gwars1306]

Another shot from the front

[gwars1306]

I went with a 3link suspension but i havent mounted the bags yet

[gwars1306]

Hey oldno7 I bought the rims from a guy in Lancaster, ca he had the deisgn already cut into the rim and had them already machined down to 22s he had 20 rims and I kick myself for not buying another four he also sold me the 8-10 lug adapters, I bought the rear super single rims and tires from a truck company out of Los Angeles everything was from craigslist except the front tires I purchased from a tire shop here in town.

[gwars1306]

I had to make these perch's or saddles for the bags to sit between i originally wanted to go with bags that could hold 10,000 lbs a piece that where twice as big as these and they wouldn't have needed the perch's but i went with the the bags that hold 5,000 lbs a piece so this is where i'm at so far i drove the truck for the first time since the start of the build i took it to San Diego hydraulics and their going to mount the repo sneeker wheel lift unit to the frame so i should have it back in a week or to so i can finish the bed.

[Codez67Chevy]

Dude your truck is freakin' SICK!!! Love the super singles in the back and the rims you picked. I can't wait to see it all done. Need to speed up the process!

[gwars1306]

Lol thanks I've been dragging my feet but I'm building 3 vehicles at one time 69firebird and a 96 6 speed caprice but after this shop puts on the tow lift and I get it back it'll be all down hill from there maybe another 2 weeks
Posted via Mobile Device

[gwars1306]

This is the sneeker repo unit mounted to the frame of the truck the wheel lift should be complete between the weekend and next week,( unit mounted by San Diego Hydraulics).

[gwars1306]

So the wheel lift is a good fit the boom drops and folds like it should so now the shop will connect the head and hydraulic clutch pump and I should be picking it up Friday .

[gwars1306]

A shot of the valve body.

[slow-1]

You are gonna be the coolest repo man in town.

[gwars1306]

Thanks Slow-1 this is something I've been wanting to do for almost 20yrs I'm glad I waited until now because if I would hsve done it in the 90s nobody was doing LS swaps then, but yeah it's a pretty cool truck.
Posted via Mobile Device

[rambler]

looking pretty good, I have seen a few shows where they have those "stealth" repo trucks.. maybe they will make a show about yours ? got to be better then the ones on now..

[gwars1306]

Thanks Rambler I'm really happy with the results so far< but as far as the TV shows I'd have to pass if ever approach by one, I've been in the biz 20 years and have too much respect for it and the way these TV shows have watered down the biz making it harder for us to make a living(there are other things that have lead to this as well) I would hate to be around another 20 years to see how the new guys will have it, its pretty sad.

[gwars1306]

This is the lift with the head on

[gwars1306]

Another shot