GA Restored Jack, Folding Handle, and Lug Wrench - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JimH2828 · 06-12-2013, 07:56 PM

I wound up buying two of these jack sets over the years and need to sell one. It's a restored jack with folding handle and lug wrench. All have been bead blasted and painted. The Jack has been partially disassembled, cleaned and lubricated. Works well, doesn't bind, top spins easily.

Jack height range = 7.5" to 16"
Lug wrench size = 3/4"

Only looking to get back what I have in it.
$100.00 shipped CONUS.
I do accept PP if you pay the fee.

Name: Jack (1).jpg
Views: 158
Size: 50.6 KB

Name: Jack (1).jpg
Views: 158
Size: 50.6 KB

Name: Jack (2).jpg
Views: 158
Size: 72.8 KB

Name: Jack (3).jpg
Views: 159
Size: 57.7 KB

Name: Jack (4).jpg
Views: 156
Size: 53.3 KB

Name: Jack (5).jpg
Views: 157
Size: 41.9 KB

REEDS 72 · 06-12-2013, 08:59 PM

Are these correct for are trucks 67/72 are thay the jacks that were in them new thanks

JimH2828 · 06-12-2013, 09:16 PM

Yes, this set is correct for 67-72 1/2 ton trucks.....the 3/4 ton is beefier.........see link below for mounting\storage location.

Mount\Storage
http://67-72chevytrucks.com/vboard/s...1&postcount=11

Direction Decal
http://67-72chevytrucks.com/vboard/s...d.php?t=492316

Thanks
JimH2828

REEDS 72 · 06-12-2013, 10:11 PM

Will you do eighty on it shipped if so I will take it.

JimH2828 · 06-12-2013, 10:25 PM

I appreciate the offer...........I can split the difference with you at $90, if that helps you out. Shiping is gonna hurt me.

Thanks
JimH2828

REEDS 72 · 06-12-2013, 10:49 PM

All do 90.00 pp info thanks.

Ratone71 · 06-13-2013, 12:13 AM

If this doesn't work out. I want it.

Thanks

06-12-2013, 07:56 PM	#1
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Restored Jack, Folding Handle, and Lug Wrench I wound up buying two of these jack sets over the years and need to sell one. It's a restored jack with folding handle and lug wrench. All have been bead blasted and painted. The Jack has been partially disassembled, cleaned and lubricated. Works well, doesn't bind, top spins easily. Jack height range = 7.5" to 16" Lug wrench size = 3/4" Only looking to get back what I have in it. $100.00 shipped CONUS. I do accept PP if you pay the fee.

06-12-2013, 08:59 PM	#2
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: Restored Jack, Folding Handle, and Lug Wrench Are these correct for are trucks 67/72 are thay the jacks that were in them new thanks

06-12-2013, 09:16 PM	#3
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: Restored Jack, Folding Handle, and Lug Wrench Yes, this set is correct for 67-72 1/2 ton trucks.....the 3/4 ton is beefier.........see link below for mounting\storage location. Mount\Storage http://67-72chevytrucks.com/vboard/s...1&postcount=11 Direction Decal http://67-72chevytrucks.com/vboard/s...d.php?t=492316 Thanks JimH2828

06-12-2013, 10:11 PM	#4
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: Restored Jack, Folding Handle, and Lug Wrench Will you do eighty on it shipped if so I will take it.

06-12-2013, 10:25 PM	#5
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: Restored Jack, Folding Handle, and Lug Wrench I appreciate the offer...........I can split the difference with you at $90, if that helps you out. Shiping is gonna hurt me. Thanks JimH2828

06-12-2013, 10:49 PM	#6
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: Restored Jack, Folding Handle, and Lug Wrench All do 90.00 pp info thanks.

06-13-2013, 12:13 AM	#7
Ratone71 Registered User Join Date: Jun 2010 Location: Santa Clara, CA Posts: 40	Re: Restored Jack, Folding Handle, and Lug Wrench If this doesn't work out. I want it. Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.