will ZJ jeep springs work to lower 67` rearend? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JEBSDAD · 06-20-2013, 10:20 PM

I know you guys hate seeing these trucks lowered this way. but with a 3 month old my budget is extremely tight. these springs were given to me. this is not my DD so hauling a load is not an issue. thank you guys in advance for any comments made. also my truck is 67` swb 2wd.

**leddzepp** · 06-20-2013, 11:00 PM

I read that they were supposed to lower your truck around 4" in back. They didn't lower it at all for me, was a waste of money. They are not any shorter, just less of a rate and flimsy, made the truck bounce. Since you have a set, try them out and see if they work for you.
Posted via Mobile Device

**WIDESIDE72** · 06-21-2013, 03:32 AM

Quote:

Originally Posted by leddzepp

I read that they were supposed to lower your truck around 4" in back...They are not any shorter, just less of a rate and flimsy, made the truck bounce. Since you have a set, try them out and see if they work for you.
Posted via Mobile Device

X2
Posted via Mobile Device

montefreak · 06-21-2013, 05:01 AM

I have these springs on my truck....yes they may be flimbsy as far as hauling anything in your bed...but on a budget they work great....my truck rides pretty smooth....they were passed down to me by a fellow member on here...good luck to ya..

Square_78 · 06-21-2013, 07:17 AM

They may or may not lower it at all and don't plan on carrying anything in the back. You are MUCH better off saving $99 and buying some CPP springs.
Posted via Mobile Device

big_al_71 · 06-21-2013, 10:35 AM

Quote:

Originally Posted by square_78

they may or may not lower it at all and don't plan on carrying anything in the back. You are much better off saving $99 and buying some cpp springs.
posted via mobile device

+1

JEBSDAD · 06-21-2013, 09:38 AM

The springs I have, have the pigtail at one end and a bigger opening at the other end. Are these the correct springs to use? Thanks again for comments and advice
Posted via Mobile Device

kaycee · 06-21-2013, 09:54 AM

For the rear u need pigtail on each end the front has it on 1 end,I run jeep springs in the rear dropped it 3 to 4".I't is a little soft in back, I did haul about 400lbs of tile in it and it rode like a caddy and didn't squat down but maybe a 1".

06-20-2013, 10:20 PM	#1
JEBSDAD Registered User Join Date: Mar 2012 Location: MURFREESBORO, TN Posts: 20	will ZJ jeep springs work to lower 67` rearend? I know you guys hate seeing these trucks lowered this way. but with a 3 month old my budget is extremely tight. these springs were given to me. this is not my DD so hauling a load is not an issue. thank you guys in advance for any comments made. also my truck is 67` swb 2wd.

06-20-2013, 11:00 PM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,020	Re: will ZJ jeep springs work to lower 67` rearend? I read that they were supposed to lower your truck around 4" in back. They didn't lower it at all for me, was a waste of money. They are not any shorter, just less of a rate and flimsy, made the truck bounce. Since you have a set, try them out and see if they work for you. Posted via Mobile Device __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

06-21-2013, 05:01 AM	#4
montefreak Registered User Join Date: Dec 2009 Location: new castle,pa Posts: 137	Re: will ZJ jeep springs work to lower 67` rearend? I have these springs on my truck....yes they may be flimbsy as far as hauling anything in your bed...but on a budget they work great....my truck rides pretty smooth....they were passed down to me by a fellow member on here...good luck to ya.. __________________

06-21-2013, 07:17 AM	#5
Square_78 Registered User Join Date: Mar 2012 Location: Okanagan Valley, BC, Canada Posts: 1,237	Re: will ZJ jeep springs work to lower 67` rearend? They may or may not lower it at all and don't plan on carrying anything in the back. You are MUCH better off saving $99 and buying some CPP springs. Posted via Mobile Device __________________ #teamlongbed "I refuse to go disc brakes. I actually love drum brakes. It makes for an adventure." - 50bomb 1978 Chevy shop truck - static 6/8" 1970 GMC 1500 - Accuair eLevel Resto-mod http://67-72chevytrucks.com/vboard/s...d.php?t=537497

06-21-2013, 09:38 AM	#7
JEBSDAD Registered User Join Date: Mar 2012 Location: MURFREESBORO, TN Posts: 20	Re: will ZJ jeep springs work to lower 67` rearend? The springs I have, have the pigtail at one end and a bigger opening at the other end. Are these the correct springs to use? Thanks again for comments and advice Posted via Mobile Device

06-21-2013, 09:54 AM	#8
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,446	Re: will ZJ jeep springs work to lower 67` rearend? For the rear u need pigtail on each end the front has it on 1 end,I run jeep springs in the rear dropped it 3 to 4".I't is a little soft in back, I did haul about 400lbs of tile in it and it rode like a caddy and didn't squat down but maybe a 1". __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.