TX 67-72 a/c dash and misc pieces - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tlcrz1972 · 06-26-2013, 08:46 PM

Factory a/c dash relatively good condition, cut out at the pinchweld $105.00 plus the trip

Also factory radio, condition IDK sold

A/c control head, levers all work freely, the face is not all that good. sold

lewisja · 07-17-2013, 03:48 PM

You take $50.00

tlcrz1972 · 07-17-2013, 07:07 PM

AAAAHHHH, no!

Quote:

Originally Posted by lewisja

You take $50.00

tlcrz1972 · 08-08-2013, 06:30 PM

save yourself the trouble of trying to cut out those a/c holes in your dash, swap it out with this one, If you do it right it can be repainted before you install it.

**special-K** · 08-08-2013, 10:24 PM

Quote:

Originally Posted by lewisja

You take $50.00

Quote:

Originally Posted by tlcrz1972

AAAAHHHH, no!

Musta been an offer for the radio or a/c controls,since those are the only parts you said you were taking offers on. It does help to form complete sentences when hoping to communicate

tlcrz1972 · 08-09-2013, 10:46 AM

Well I really didn't consider the offer the way he asked it, but yes maybe he did make an offer on one of the two other pieces. I agee complete sentenes are very helpful.
Thanks for pointing that out.

Quote:

Originally Posted by special-K

Musta been an offer for the radio or a/c controls,since those are the only parts you said you were taking offers on. It does help to form complete sentences when hoping to communicate

tlcrz1972 · 08-09-2013, 10:47 AM

So what was this offer for?

Quote:

Originally Posted by lewisja

You take $50.00

tlcrz1972 · 08-16-2013, 09:44 PM

revised prices

**Homebuilt Hotrods** · 08-17-2013, 12:07 AM

I'm interested in the ac control unit. What is the total cost for ac control unit to 57110? Thanks.

tlcrz1972 · 08-19-2013, 09:33 PM

It look like total of $24.00 shipped to you USPS.

Quote:

Originally Posted by Homebuilt Hotrods

I'm interested in the ac control unit. What is the total cost for ac control unit to 57110? Thanks.

lewisja · 08-22-2013, 05:10 PM

This still available..

Factory a/c dash relatively good condition, cut out at the pinchweld $115.00

tlcrz1972 · 08-22-2013, 06:13 PM

Yes It's still available, and it is actually cut out just beyond the pinch weld so the material from the cowl area is still there so you can get it just like you desire.

Quote:

Originally Posted by lewisja

This still available..

Factory a/c dash relatively good condition, cut out at the pinchweld $115.00

tlcrz1972 · 11-25-2013, 09:42 PM

parts still available, prices revised

**Homebuilt Hotrods** · 11-25-2013, 09:46 PM

If you ship it in a USPS flat rate padded envelope with a little extra padding Id take the ac control unit if all the levers work and aren't broke. Ill use it for my brothers truck. I just bought one from another member and that's how it was shipped and arrived nicely shipped priority for under 6 dollars. Thanks. Let me know and ill paypal or money order which ever you prefer. Say 20 dollars shipped?

tlcrz1972 · 11-25-2013, 09:51 PM

Let me verify the postage cost, what is your zip code.

Quote:

Originally Posted by Homebuilt Hotrods

If you ship it in a USPS flat rate padded envelope with a little extra padding Id take the ac control unit if all the levers work and aren't broke. Ill use it for my brothers truck. I just bought one from another member and that's how it was shipped and arrived nicely shipped priority for under 6 dollars. Thanks. Let me know and ill paypal or money order which ever you prefer. Say 20 dollars shipped?

**Homebuilt Hotrods** · 11-25-2013, 09:53 PM

Quote:

Originally Posted by tlcrz1972

Let me verify the postage cost, what is your zip code.

57110 is the zip code.

tlcrz1972 · 11-26-2013, 08:29 PM

Ok I went to the PO and they do want +/- $6.00 to go the padded bag.

I'm not super comfortable sending it that way, but if your good with taking the risk I'll send it that way.

Yes all the levers are good and functioning, the face is a little cloudy and dirty under the lens. see pictures

And it has the mounting bracket with hardware and two cables (not shown).

Quote:

Originally Posted by Homebuilt Hotrods

57110 is the zip code.

**Homebuilt Hotrods** · 11-27-2013, 12:00 AM

Thanks for the photos. I found one locally in great shape so will have to pass. I appreciate your time thank you sir.

blackhawkip · 11-27-2013, 01:18 AM

"Flahoe" is looking for an A/C dash if you want to give him a shout.

GLWS

pbjsammich · 11-28-2013, 08:37 AM

Dibs on AC controls and radio, pending shipping quote (per PM). Thanks!

tlcrz1972 · 11-28-2013, 07:43 PM

Here are a few more pictures of the dash.

tlcrz1972 · 04-06-2014, 02:08 PM

TTT,

One more time, look and see if there is anything your interested in. I have a little more time left on my seller membership here, and then I'm downgrading to just being a member for a while.

I'm about to get in the middle of building a new shop, and time will not be there for parts selling.

06-26-2013, 08:46 PM	#1
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	67-72 a/c dash and misc pieces Factory a/c dash relatively good condition, cut out at the pinchweld $105.00 plus the trip Also factory radio, condition IDK sold A/c control head, levers all work freely, the face is not all that good. sold Attached Images Last edited by tlcrz1972; 12-04-2013 at 09:47 PM. Reason: $$sld

07-17-2013, 03:48 PM	#2
lewisja Registered User Join Date: Jul 2013 Location: Little Rock, AR Posts: 13	Re: 67-72 a/c dash and misc pieces You take $50.00

08-08-2013, 06:30 PM	#4
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: 67-72 a/c dash and misc pieces save yourself the trouble of trying to cut out those a/c holes in your dash, swap it out with this one, If you do it right it can be repainted before you install it.

08-16-2013, 09:44 PM	#8
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: 67-72 a/c dash and misc pieces revised prices

08-17-2013, 12:07 AM	#9
Homebuilt Hotrods Senior Member Join Date: May 2012 Location: Black Hills, SD Posts: 347	Re: 67-72 a/c dash and misc pieces I'm interested in the ac control unit. What is the total cost for ac control unit to 57110? Thanks. __________________ Garage Built

08-22-2013, 05:10 PM	#11
lewisja Registered User Join Date: Jul 2013 Location: Little Rock, AR Posts: 13	Re: 67-72 a/c dash and misc pieces This still available.. Factory a/c dash relatively good condition, cut out at the pinchweld $115.00

11-25-2013, 09:42 PM	#13
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: 67-72 a/c dash and misc pieces parts still available, prices revised __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy

11-25-2013, 09:46 PM	#14
Homebuilt Hotrods Senior Member Join Date: May 2012 Location: Black Hills, SD Posts: 347	Re: 67-72 a/c dash and misc pieces If you ship it in a USPS flat rate padded envelope with a little extra padding Id take the ac control unit if all the levers work and aren't broke. Ill use it for my brothers truck. I just bought one from another member and that's how it was shipped and arrived nicely shipped priority for under 6 dollars. Thanks. Let me know and ill paypal or money order which ever you prefer. Say 20 dollars shipped? __________________ Garage Built

11-27-2013, 12:00 AM	#18
Homebuilt Hotrods Senior Member Join Date: May 2012 Location: Black Hills, SD Posts: 347	Re: 67-72 a/c dash and misc pieces Thanks for the photos. I found one locally in great shape so will have to pass. I appreciate your time thank you sir. __________________ Garage Built

11-27-2013, 01:18 AM	#19
blackhawkip Registered User Join Date: Dec 2011 Location: Fort Knox, KY Posts: 212	Re: 67-72 a/c dash and misc pieces "Flahoe" is looking for an A/C dash if you want to give him a shout. GLWS __________________ 1972 Cheyenne Super K20 4wd 1972 Chevy Camaro Z28 1972 Cheyenne Super K30 (sold) 1972 Cheyenne Super Shortbed w/402bb (sold) 1972 Custom/Deluxe 2wd Suburban w/402bb (sold) plus too many others.....

11-28-2013, 08:37 AM	#20
pbjsammich Registered User Join Date: Aug 2011 Location: Lake Conroe TX Posts: 53	Re: 67-72 a/c dash and misc pieces Dibs on AC controls and radio, pending shipping quote (per PM). Thanks! __________________ 1967 C10 Stepside - "Minty" 1972 GMC 3500 - "Rojo Grande"

11-28-2013, 07:43 PM	#21
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: 67-72 a/c dash and misc pieces Here are a few more pictures of the dash. Attached Images __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy

04-06-2014, 02:08 PM	#22
tlcrz1972 Registered User Join Date: Apr 2013 Location: Gainesville, TEXAS Posts: 658	Re: 67-72 a/c dash and misc pieces TTT, One more time, look and see if there is anything your interested in. I have a little more time left on my seller membership here, and then I'm downgrading to just being a member for a while. I'm about to get in the middle of building a new shop, and time will not be there for parts selling. __________________ 1972 Chevrolet Cheyenne LB 1/2 ton finished restoration/rebuild 1995 350 throttle body FI, 4L6E (running on modified GM wiring harness) 3.08 posi rearend, factory A/C on 134A, p/s, p/b, late 70's power windows and locks and cruise, speakers in the dash + 6x9's behind the seat, factory tilt, 40 gallon fuel tank in the bed with integrated tool box, air assist bags on the rearend, sway bar up front and much more. 1972 chevrolet SNB finished 2002, 350 TB FI, TH400, factory A/C, p/b, p/s, (FOR SALE) 1969 Chevrolet 1 ton in work, home made PTO dump bed extended frame, 350 CI , 1972 Chevrolet 3/4 ton suburban future project 1972 Chevrolet 3/4 ton p/u maybe a project one day 1966 Toyota Landcruiser my playtoy



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.