Future Mods - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gldevall · 06-29-2003, 10:41 PM

Hopefully in the near future I will be adding the following items to my truck and in this order.

1. PSC front-end rebuild kit

2. Posi rear-end with 3.42 gears

3. Rear disc brakes

I plan on doing 2 & 3 at the same time. What some of ya'lls future mods?

bigblock73 · 06-29-2003, 10:50 PM

Quote:

Originally posted by gldevall
What some of ya'lls future mods?

Finishing my cab (paint) and getting it back on the frame.

...Jeff

PHOENIX · 06-30-2003, 11:14 AM

Going to be doing exhaust soon.
Gonna buy a cat, muffler, coat headers, and buy misc. stuff real soon.
Buying and chop saw and welder too.
Gonna do it all myself, maybe have a little help from some friends.

cochino12 · 06-30-2003, 12:14 PM

1. gears and posi

2. lt4 hot cam

3. shift kit

should have 1,2 ordered and intsalled in about 3 weeks. I just need to figure out what ratio. How did you figure out which gears to use?

*1FaastC10* · 06-30-2003, 12:57 PM

re-disassemble my chassis, and have it blasted...
then i'll paint it, and start putting everything back together. who knows from there...

messed up c-10 · 06-30-2003, 01:18 PM

Quote:

Originally posted by gldevall
What some of ya'lls future mods?

I should be doing my exhaust in a few weeks. Then if I can make enough money before summer ends I might try and get the Chevelle scoops installed and strip and primer my truck. After that I'm saving up for a new engine and trans.

gldevall · 06-30-2003, 01:18 PM

Quote:

Originally posted by cochino12
1. gears and posi

2. lt4 hot cam

3. shift kit

should have 1,2 ordered and intsalled in about 3 weeks. I just need to figure out what ratio. How did you figure out which gears to use?

Just by reading what everyone was posting.

84Stepper · 06-30-2003, 01:32 PM

Rims, Leather bucket seats, alll new carpet, 373's with possi, 700r4 tranny, wood bed, and some more bling bling for the engine. I will have the gears within a month. The rest could be a while.

BigAlVB · 06-30-2003, 02:11 PM

Need 3.73 or 4.10 gears front and rear (4x4) and would like a dual battery setup with another Optima. Also need to shim my console--it shakes like crazy at certain speeds and need to order new door scuff panels since I replaced all the weatherstripping. A cowl hood and rust repair is on the wish list (longer term goals.)

gldevall · 07-01-2003, 11:44 AM

I've been thinking and I may go with 3.73s over the 3.42s. What do you guys think?

apstguy · 07-01-2003, 04:54 PM

Fix the A/C, new exhaust, tint windows, and I'll be done untill I can get enough dough for a drop and factory 350 crate engine. I'm not going to do any performance mods on the 350, but save up for a 383. My 305 is dying so it needs to be replaced but no way I can afford a 383 anytime soon.

TIMSPEED · 07-01-2003, 08:53 PM

Quote:

Originally posted by apstguy
My 305 is dying so it needs to be replaced but no way I can afford a 383 anytime soon.

Rettig Brothers has a good deal for a nice 355 with a 4 year/45k mile warranty. IM me about it.

AirMale · 07-02-2003, 05:49 AM

550cu. going in (2 weeks)
STAY AWAY FROM 3.73's Unless you have a 700r4 or like to cruise at 60mph at 3300rpm

gldevall · 07-02-2003, 08:15 AM

Yeah that's what I've been thinking.

06-29-2003, 10:41 PM	#1
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Future Mods Hopefully in the near future I will be adding the following items to my truck and in this order. 1. PSC front-end rebuild kit 2. Posi rear-end with 3.42 gears 3. Rear disc brakes I plan on doing 2 & 3 at the same time. What some of ya'lls future mods? __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

06-30-2003, 11:14 AM	#3
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Going to be doing exhaust soon. Gonna buy a cat, muffler, coat headers, and buy misc. stuff real soon. Buying and chop saw and welder too. Gonna do it all myself, maybe have a little help from some friends. __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

06-30-2003, 12:14 PM	#4
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	1. gears and posi 2. lt4 hot cam 3. shift kit should have 1,2 ordered and intsalled in about 3 weeks. I just need to figure out what ratio. How did you figure out which gears to use? __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

06-30-2003, 01:32 PM	#8
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	Rims, Leather bucket seats, alll new carpet, 373's with possi, 700r4 tranny, wood bed, and some more bling bling for the engine. I will have the gears within a month. The rest could be a while. __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi

06-30-2003, 02:11 PM	#9
BigAlVB Registered User Join Date: Mar 2003 Location: Holland, MI Posts: 74	Need 3.73 or 4.10 gears front and rear (4x4) and would like a dual battery setup with another Optima. Also need to shim my console--it shakes like crazy at certain speeds and need to order new door scuff panels since I replaced all the weatherstripping. A cowl hood and rust repair is on the wish list (longer term goals.) __________________ "When this car hits 88 miles per hour, you're going to see some serious s*&$!" Back To The Future

06-30-2003, 12:57 PM	#5
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	re-disassemble my chassis, and have it blasted... then i'll paint it, and start putting everything back together. who knows from there...

07-01-2003, 11:44 AM	#10
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	I've been thinking and I may go with 3.73s over the 3.42s. What do you guys think? __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

07-01-2003, 04:54 PM	#11
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	Fix the A/C, new exhaust, tint windows, and I'll be done untill I can get enough dough for a drop and factory 350 crate engine. I'm not going to do any performance mods on the 350, but save up for a 383. My 305 is dying so it needs to be replaced but no way I can afford a 383 anytime soon. __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

07-02-2003, 05:49 AM	#13
AirMale Senior Member Join Date: Jan 2003 Location: Atlantic City, NJ Posts: 1,073	550cu. going in (2 weeks) STAY AWAY FROM 3.73's Unless you have a 700r4 or like to cruise at 60mph at 3300rpm __________________ 86 SWB 9.0 LITER T-400-OD 4.11 eaton-4/5 drop Best 1/4 12.51 @112mph no traction

07-02-2003, 08:15 AM	#14
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Yeah that's what I've been thinking. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.