Jer's 64 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jer64 · 07-01-2013, 07:35 PM

So I'm finally starting my build thread! I grew up with a 63 GMC short wide side so I've always loved these trucks and when I found this forum, I was totally stoked! You guys are putting out some super nice trucks and I'm glad I'll be able to look to this forum for guidance. Here's some pics, there will be more to follow!

Jer64 · 07-01-2013, 08:23 PM

I installed my Porterbuilt stage 1 kit a couple months ago along with a set of control arms and Addco swaybar. I was really impressed with how much of an improvement over stock this was. It really flattened out any body roll through corners! I also picked up a 2006 5.3L L33 and a 4L60E from a local salvage yard and ordered a wiring harness from PSI. I decided to finish my air system before doing the motor swap, so I got a system through Travis at AZ ProPerformance. Dual Viair compressors, accuair VU4 manifold and Porterbuilt mounting brackets. My goal is to get the air system and c-notches installed by August 17th and be ready for the Sittin Pretti car show in Arlington.

Snowbound · 07-03-2013, 10:32 AM

Nice lookin truck!

That Porterbuilt stuff looks top notch.
Posted via Mobile Device

McMurphy · 07-03-2013, 01:47 PM

and

to the site, and 100%

that is a sharp looking rig !!

Grizz1963 · 07-03-2013, 02:04 PM

I would cheat on BillyBob with your truck.

That is rather good looking.

I do like a really yellow car, they can set off the chrome really well.

Jmorales3181 · 07-03-2013, 03:44 PM

Very nice truck man!

Posted via Mobile Device

Jer64 · 07-05-2013, 12:23 PM

thank you Sirs! The bed is coming off this weekend and hopefully I'll get the c-notches in and some of the air compressor stuff installed!

**lolife99** · 07-05-2013, 12:38 PM

Cool, cool truck.
Are those the standard PB a-arms or the "Forward Series" a-arms?

Jer64 · 07-05-2013, 02:47 PM

Thank you! They are the standard arms, I got those instead of the forward arms because I plan on installing a touring dropmember when I install the new motor.

markeb01 · 07-05-2013, 03:26 PM

Welcome and thanks for sharing the photos and details. That is a beautiful truck. The Porterbuilt equipment is real artwork. You're really moving right along. Look forward to the updates.

Jer64 · 07-13-2013, 01:09 AM

thanks! glad to see another Wa. guy here! I have some family in Prosser, so I'm over on the eastside fairly often. you've come a long way on your truck, didn't know the '60 frames looked like that.

Jer64 · 07-13-2013, 01:17 AM

I got the bed taken off this afternoon with the help of some friends, one step closer to finishing the air suspension! Here's some more pics as is, with just the front done and some with the rear suspension as is.

Jer64 · 07-13-2013, 01:23 AM

I've had this truck for about 8 years and I've known that the original paint was a turquoise/green color, but this is the first time I've seen so much of the original paint! Although the yellow has been growing on me, i'm thinking a color change back to original might be the way to go.

Jer64 · 07-13-2013, 01:37 AM

When I originally lowered the truck, I used 2 1/2" drop spindles and 2" springs in the front and 4" springs in the back. Then I added 2" lowering blocks to back. here's some of the pics along the way. the front springs came out in two pieces....

Jeff La · 08-18-2013, 08:54 AM

Truck looks great, always did like the yellow on this body style

Jmorales3181 · 08-18-2013, 10:41 PM

Looks clean man! Nice work

Posted via Mobile Device

joesscamaro · 08-18-2013, 10:58 PM

Really like your truck, and definitely keep the wheels you have on there. They look much better than those 20's in my opinion
Posted via Mobile Device

coulter · 08-18-2013, 11:08 PM

that stance looks great!!! thats a really good lookin ride man!!! and i agree about the wheels

rmvlt1100 · 08-18-2013, 11:53 PM

Very nice!!!!! Looks great, love the way it is sitting. I also like the choice of wheels.

Bomp · 09-09-2013, 10:23 PM

Score

Jer64 · 09-14-2013, 01:08 PM

Quote:

Originally Posted by Bomp

Score

thanks Bomp! The cab is pretty much gone and rusted out so this will be a much bigger project than the '64.

Quote:

Originally Posted by Ta2Don

I agree with Bomp, Nice Score!!!
Posted via Mobile Device

Thanks! The truck has been in the family since it was new, but its just been sitting there for about 10 years.

Quote:

Originally Posted by malo66

This is such a sick project. I love the yellow!

thanks man!

Quote:

Originally Posted by Grizz1963

Great result on getting the truck done in time.

Cool score on the GMC.

thanks Grizz, yeah I don't think i'll be rushing like that to make a show again, I was just glad nothing fell off or broke on the drive! lol

Quote:

Originally Posted by 1963c-10

Nice find....and the 64 came out great

thanks! now I get to tear it apart again and start on the motor swap!

Jer64 · 09-14-2013, 01:24 PM

I've been having some problems with the charging system when the air compressors kick on. When the voltage gets low enough, the compressors shut off to keep from draining the battery. I got a one wire, high voltage alternator from summit and a yellow top Optima battery and everything seems to be working a lot better now!

Jer64 · 09-14-2013, 01:39 PM

I like how the air pressure gauges turned out, looks pretty clean I think.

Ta2Don · 09-10-2013, 11:14 PM

I agree with Bomp, Nice Score!!!
Posted via Mobile Device

malo66 · 09-12-2013, 09:24 PM

This is such a sick project. I love the yellow!

07-01-2013, 07:35 PM	#1
Jer64 Registered User Join Date: Feb 2013 Location: Mill Creek Washington Posts: 127	Jer's 64 So I'm finally starting my build thread! I grew up with a 63 GMC short wide side so I've always loved these trucks and when I found this forum, I was totally stoked! You guys are putting out some super nice trucks and I'm glad I'll be able to look to this forum for guidance. Here's some pics, there will be more to follow! Attached Images

07-01-2013, 08:23 PM	#2
Jer64 Registered User Join Date: Feb 2013 Location: Mill Creek Washington Posts: 127	Re: Jer's 64 I installed my Porterbuilt stage 1 kit a couple months ago along with a set of control arms and Addco swaybar. I was really impressed with how much of an improvement over stock this was. It really flattened out any body roll through corners! I also picked up a 2006 5.3L L33 and a 4L60E from a local salvage yard and ordered a wiring harness from PSI. I decided to finish my air system before doing the motor swap, so I got a system through Travis at AZ ProPerformance. Dual Viair compressors, accuair VU4 manifold and Porterbuilt mounting brackets. My goal is to get the air system and c-notches installed by August 17th and be ready for the Sittin Pretti car show in Arlington. Attached Images

07-03-2013, 10:32 AM	#3
Snowbound Registered User Join Date: Aug 2002 Location: Westbank, BC Posts: 403	Re: Jer's 64 Nice lookin truck! That Porterbuilt stuff looks top notch. Posted via Mobile Device __________________ 1965 Chevy Short Box Stepside, 230 - 3 speed, 4:11 gears, original paint rust free survivor. Now sporting a 383 SBC and TKO-600

07-03-2013, 01:47 PM	#4
McMurphy Registered User Join Date: Sep 2011 Location: Tacoma, WA Posts: 2,425	Re: Jer's 64 and to the site, and 100% that is a sharp looking rig !! __________________ Michael McMurphy My 66 Stepside My 64 Tow Truck My 66 Tempest Table Of Contents Added to Page1

07-03-2013, 02:04 PM	#5
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,577	Re: Jer's 64 I would cheat on BillyBob with your truck. That is rather good looking. I do like a really yellow car, they can set off the chrome really well. __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.

07-03-2013, 03:44 PM	#6
Jmorales3181 Registered User Join Date: Aug 2012 Location: Smithfield rhode island Posts: 722	Re: Jer's 64 Very nice truck man! Posted via Mobile Device __________________ My frame Layin 63 short bed project http://67-72chevytrucks.com/vboard/s...d.php?t=551353

07-05-2013, 12:23 PM	#7
Jer64 Registered User Join Date: Feb 2013 Location: Mill Creek Washington Posts: 127	Re: Jer's 64 thank you Sirs! The bed is coming off this weekend and hopefully I'll get the c-notches in and some of the air compressor stuff installed!

07-05-2013, 12:38 PM	#8
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Jer's 64 Cool, cool truck. Are those the standard PB a-arms or the "Forward Series" a-arms? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

07-05-2013, 02:47 PM	#9
Jer64 Registered User Join Date: Feb 2013 Location: Mill Creek Washington Posts: 127	Re: Jer's 64 Thank you! They are the standard arms, I got those instead of the forward arms because I plan on installing a touring dropmember when I install the new motor.

07-05-2013, 03:26 PM	#10
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: Jer's 64 Welcome and thanks for sharing the photos and details. That is a beautiful truck. The Porterbuilt equipment is real artwork. You're really moving right along. Look forward to the updates. __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

07-13-2013, 01:09 AM	#11
Jer64 Registered User Join Date: Feb 2013 Location: Mill Creek Washington Posts: 127	Re: Jer's 64 thanks! glad to see another Wa. guy here! I have some family in Prosser, so I'm over on the eastside fairly often. you've come a long way on your truck, didn't know the '60 frames looked like that.

07-13-2013, 01:17 AM	#12
Jer64 Registered User Join Date: Feb 2013 Location: Mill Creek Washington Posts: 127	Re: Jer's 64 I got the bed taken off this afternoon with the help of some friends, one step closer to finishing the air suspension! Here's some more pics as is, with just the front done and some with the rear suspension as is. Attached Images

07-13-2013, 01:23 AM	#13
Jer64 Registered User Join Date: Feb 2013 Location: Mill Creek Washington Posts: 127	Re: Jer's 64 I've had this truck for about 8 years and I've known that the original paint was a turquoise/green color, but this is the first time I've seen so much of the original paint! Although the yellow has been growing on me, i'm thinking a color change back to original might be the way to go. Attached Images

07-13-2013, 01:37 AM	#14
Jer64 Registered User Join Date: Feb 2013 Location: Mill Creek Washington Posts: 127	Re: Jer's 64 When I originally lowered the truck, I used 2 1/2" drop spindles and 2" springs in the front and 4" springs in the back. Then I added 2" lowering blocks to back. here's some of the pics along the way. the front springs came out in two pieces.... Attached Images

08-18-2013, 08:54 AM	#15
Jeff La Registered User Join Date: Dec 2011 Location: Donaldsonville, La. Posts: 1,024	Re: Jer's 64 Truck looks great, always did like the yellow on this body style



Register or Log In To remove these advertisements.

08-18-2013, 10:41 PM	#16
Jmorales3181 Registered User Join Date: Aug 2012 Location: Smithfield rhode island Posts: 722	Re: Jer's 64 Looks clean man! Nice work Posted via Mobile Device __________________ My frame Layin 63 short bed project http://67-72chevytrucks.com/vboard/s...d.php?t=551353

08-18-2013, 10:58 PM	#17
joesscamaro Registered User Join Date: Sep 2008 Location: Newport, North Carolina Posts: 643	Re: Jer's 64 Really like your truck, and definitely keep the wheels you have on there. They look much better than those 20's in my opinion Posted via Mobile Device

08-18-2013, 11:08 PM	#18
coulter Registered User Join Date: Feb 2011 Location: muskogee, ok Posts: 1,091	Re: Jer's 64 that stance looks great!!! thats a really good lookin ride man!!! and i agree about the wheels __________________ bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918

08-18-2013, 11:53 PM	#19
rmvlt1100 Registered User Join Date: Jan 2012 Location: Crest Hill, IL Posts: 337	Re: Jer's 64 Very nice!!!!! Looks great, love the way it is sitting. I also like the choice of wheels. __________________ This is my Build A 5.3L 1965 C-10 Fleetside http://67-72chevytrucks.com/vboard/s...d.php?t=502100

09-09-2013, 10:23 PM	#20
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: Jer's 64 Score

09-14-2013, 01:24 PM	#22
Jer64 Registered User Join Date: Feb 2013 Location: Mill Creek Washington Posts: 127	Re: Jer's 64 I've been having some problems with the charging system when the air compressors kick on. When the voltage gets low enough, the compressors shut off to keep from draining the battery. I got a one wire, high voltage alternator from summit and a yellow top Optima battery and everything seems to be working a lot better now! __________________ My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=587028

09-14-2013, 01:39 PM	#23
Jer64 Registered User Join Date: Feb 2013 Location: Mill Creek Washington Posts: 127	Re: Jer's 64 I like how the air pressure gauges turned out, looks pretty clean I think. __________________ My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=587028

09-10-2013, 11:14 PM	#24
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: Jer's 64 I agree with Bomp, Nice Score!!! Posted via Mobile Device __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

09-12-2013, 09:24 PM	#25
malo66 Registered User Join Date: Sep 2013 Location: Melbourne, Australia Posts: 12	Re: Jer's 64 This is such a sick project. I love the yellow!

Register or Log In To remove these advertisements.