![]() |
|
![]() |
#1 |
Registered User
Join Date: May 2009
Location: Good Thunder Mn.
Posts: 955
|
Cab bushing questions
I've got a 80 k10 that I'm getting ready for paint. The cab is sagging pretty bad, so I ordered up some new bushings. When I took one of the rear cab mount bolts out, the long bottom bushing slid off of a tube. Does the cab need to be jacked up high enough to get this tube out from the top? Seems that I would have to jack up the rear of the cab a good 6 or 7 inches, does that sound about right?
Posted via Mobile Device |
![]() |
![]() |
![]() |
#2 |
Another Day, Another Dollar
Join Date: Nov 2008
Location: North Vancouver, BC
Posts: 1,316
|
Re: Cab bushing questions
yes.
should only need to come up 4-5 inches
__________________
-78 K20 Cheyenne 454 long box, 4" lift, 35" MT's, '84 cab, '80 box "its hip to be square" ![]() |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: May 2009
Location: Good Thunder Mn.
Posts: 955
|
Re: Cab bushing questions
Thanks, is the tube part of the upper bushing then?
Posted via Mobile Device |
![]() |
![]() |
![]() |
Bookmarks |
|
|