Any need for 69 suburban trim pieces? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smonty · 07-02-2003, 12:34 AM

I found a 69 Suburban that had decent upper trim all the way around so I took it off. The driver and passenger side door pieces have holes where the west coast mirrors were. One of the rear corner pieces has a hole where a screw was. Also, I have the two inside trim pieces that go in the back (the longer chrome ones like the ones that go above the door panels). They are in better than average shape. Don't know what this stuff is worth as I don't really have much experience with suburbans. Make me an offer if you need any of it. One of the trim pieces is about 9 feet long so shipping could be a problem. I am located in the DFW area. Any questions please email me at smonty46@hotmail.com

Thanks,

Ernie

jays68yak · 07-02-2003, 01:01 AM

any rear inside panels?

smonty · 07-02-2003, 01:32 AM

The rear inside panels were gone. I was surprised that no one took the trim pieces.

Hotrodhenryj · 07-02-2003, 06:14 AM

Did it have rear AC, needing vents.

smonty · 07-02-2003, 10:14 AM

It did not have air. There are quite a few parts left on it though if you need anything else that is there.

'72 Burb · 07-02-2003, 10:28 AM

Is the Burb you have come across being parted out? Am still looking for some good floor pans for my 72 and have no luck finding any that are in better shape than the ones I have now.
I'm in the Dallas area so getting them would be no problem. Let me know. Thanks.

smonty · 07-02-2003, 12:29 PM

Sent you an email. Hope it helps.

'72 Burb · 07-02-2003, 04:44 PM

Hey Smonty,
Thanks for the info. My project has stalled, and this might be what I need to get it going again.

Hope all is well with you and thanks again for the reply.

07-02-2003, 12:34 AM	#1
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Any need for 69 suburban trim pieces? I found a 69 Suburban that had decent upper trim all the way around so I took it off. The driver and passenger side door pieces have holes where the west coast mirrors were. One of the rear corner pieces has a hole where a screw was. Also, I have the two inside trim pieces that go in the back (the longer chrome ones like the ones that go above the door panels). They are in better than average shape. Don't know what this stuff is worth as I don't really have much experience with suburbans. Make me an offer if you need any of it. One of the trim pieces is about 9 feet long so shipping could be a problem. I am located in the DFW area. Any questions please email me at smonty46@hotmail.com Thanks, Ernie

07-02-2003, 01:01 AM	#2
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	any rear inside panels? __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

07-02-2003, 01:32 AM	#3
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	reply to jays68yak The rear inside panels were gone. I was surprised that no one took the trim pieces. __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

07-02-2003, 06:14 AM	#4
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Did it have rear AC, needing vents. __________________ Arizona rust free sheetmetal

07-02-2003, 10:14 AM	#5
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	reply to Hotrodhenryj It did not have air. There are quite a few parts left on it though if you need anything else that is there. __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

07-02-2003, 10:28 AM	#6
'72 Burb Registered User Join Date: Mar 2002 Location: Dallas, Texas Posts: 101	Is the Burb you have come across being parted out? Am still looking for some good floor pans for my 72 and have no luck finding any that are in better shape than the ones I have now. I'm in the Dallas area so getting them would be no problem. Let me know. Thanks. __________________ 72 2wd. Burb 350 TPI w/ auto (frame-off rebuild) Soon to be broke from chrome plating, powder coating and stainless steel! Dallas, Texas

07-02-2003, 12:29 PM	#7
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply to '72 Burb Sent you an email. Hope it helps.

07-02-2003, 04:44 PM	#8
'72 Burb Registered User Join Date: Mar 2002 Location: Dallas, Texas Posts: 101	Hey Smonty, Thanks for the info. My project has stalled, and this might be what I need to get it going again. Hope all is well with you and thanks again for the reply. __________________ 72 2wd. Burb 350 TPI w/ auto (frame-off rebuild) Soon to be broke from chrome plating, powder coating and stainless steel! Dallas, Texas



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.