TH200-4R / TH350 swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Iceman7642 · 07-03-2003, 01:59 AM

Has anyone replaced a Th350 with a TH200-4R tranny?

How hard was it and how hard would it be for me (19 yrs. old w/ no tranny experiance)? (But we have a family friend in the tranny bussness)

Did you just instal a floor shifter instead of the one on the colum and get a new steering colum (maybe a tilt one

)?

Aren't the main things moving the rear bracket about 6" , adjusting the trottle valve, and the shifting part?

And did you buy a new one (and from where) or a used one from the treasure (junk) yard?

Thanks a bunch,

Michael

smokekiki · 07-03-2003, 08:16 AM

You can hook it to the stock colum.Lokar has an adjustable linkage that works real nice,allthough the stock will work.I have a bench in my suburban with the stock tilt.It has a 700r4.Not sure how far to move the crossmember on a 200.The tv cable must be installed and adjusted correctly.Have someone check the line pressure for the best adjustment of the tv.Depending on the lenth of the trans you need to short the driveshaft.Speedo cable may need to be longer.Putting the trans in is not a real hard job.It is the same as any trans change.

cdowns · 07-03-2003, 09:26 AM

i have a 2004R tranny that i got from www.fbperformance.com it's a bolt in deal no need to shorten the driveshaft you just move the tranny crossmember back to the holes for the th400 mount position, yes you can still use the original speedo cable, you can use the original shift linkage altho i went to a lokar floor shift and a tilt steering column it's a very easy bolt in deal the only thing a little tricky is the tv cable adjustment. i definately suggest that if you"re going to go thru the hassel of changing the tranny over you go for a freash performance build up , i've got 35K miles on mine not a problem

Iceman7642 · 07-06-2003, 09:55 PM

Thanks for the feedback

Michael

Longhorn Man · 07-06-2003, 11:15 PM

Don't forget some sot of lock up kit for the converter. If you run it unlocked all the time it will slip excesivly in OD.

07-03-2003, 01:59 AM	#1
Iceman7642 P!$$ on Ford Join Date: Jun 2003 Location: Federal Way, WA Posts: 334	TH200-4R / TH350 swap Has anyone replaced a Th350 with a TH200-4R tranny? How hard was it and how hard would it be for me (19 yrs. old w/ no tranny experiance)? (But we have a family friend in the tranny bussness) Did you just instal a floor shifter instead of the one on the colum and get a new steering colum (maybe a tilt one )? Aren't the main things moving the rear bracket about 6" , adjusting the trottle valve, and the shifting part? And did you buy a new one (and from where) or a used one from the treasure (junk) yard? Thanks a bunch, Michael __________________ [FONT="Impact"][COLOR="Navy"]Michael Lowered 1972 C-20 Longbed with 350 and TH350 1995 Tahoe LS - Custom intake, k&n, TBI spacer, sweet tail lights, clear front lights... 2009 Nissan Versa I am 26, married, and we had our first baby in July of 2009

07-03-2003, 08:16 AM	#2
smokekiki Mike Join Date: Jan 2003 Location: west chester pa Posts: 2,473	You can hook it to the stock colum.Lokar has an adjustable linkage that works real nice,allthough the stock will work.I have a bench in my suburban with the stock tilt.It has a 700r4.Not sure how far to move the crossmember on a 200.The tv cable must be installed and adjusted correctly.Have someone check the line pressure for the best adjustment of the tv.Depending on the lenth of the trans you need to short the driveshaft.Speedo cable may need to be longer.Putting the trans in is not a real hard job.It is the same as any trans change. __________________ 70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires

07-03-2003, 09:26 AM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	i have a 2004R tranny that i got from www.fbperformance.com it's a bolt in deal no need to shorten the driveshaft you just move the tranny crossmember back to the holes for the th400 mount position, yes you can still use the original speedo cable, you can use the original shift linkage altho i went to a lokar floor shift and a tilt steering column it's a very easy bolt in deal the only thing a little tricky is the tv cable adjustment. i definately suggest that if you"re going to go thru the hassel of changing the tranny over you go for a freash performance build up , i've got 35K miles on mine not a problem __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

07-06-2003, 09:55 PM	#4
Iceman7642 P!$$ on Ford Join Date: Jun 2003 Location: Federal Way, WA Posts: 334	Thanks for the feedback Michael __________________ [FONT="Impact"][COLOR="Navy"]Michael Lowered 1972 C-20 Longbed with 350 and TH350 1995 Tahoe LS - Custom intake, k&n, TBI spacer, sweet tail lights, clear front lights... 2009 Nissan Versa I am 26, married, and we had our first baby in July of 2009

07-06-2003, 11:15 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Don't forget some sot of lock up kit for the converter. If you run it unlocked all the time it will slip excesivly in OD.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.