CA 1971 GMC Suburban - The 1947 - Present Chevrolet & GMC Truck Message Board Network

budnikguy · 08-07-2013, 10:05 PM

Not a lot here....rear hatch is a pending sale. This will be a complete part out. 1/2 2wd 350/350 5 lug disc brake front, non posi rear I believe 3.08 will double check that.
Tailgate $100
GMC Super Custom 1500 emblems $50
Rear Bumper $95
Bumper Brackets $40

all prices plus shipping...ask about anything you may want also...No OE seats, no carpet retainers, no rear interior panels, no headliner

**Bgrdmoose** · 08-07-2013, 11:44 PM

I'll take the firewall plug above the throttle cable.
-Zack
Posted via Mobile Device

budnikguy · 08-08-2013, 09:41 AM

$6 delivered, in a padded envelope....

Quote:

Originally Posted by Bgrdmoose

I'll take the firewall plug above the throttle cable.
-Zack
Posted via Mobile Device

Posted via Mobile Device

budnikguy · 08-09-2013, 02:33 PM

if you want it...here are pics

Quote:

Originally Posted by Bgrdmoose

I'll take the firewall plug above the throttle cable.
-Zack
Posted via Mobile Device

**JimH2828** · 08-08-2013, 12:43 PM

I'll take the below items if you can price the pile well.

1) Oil pressure line and firewall grommet, if it's in reusable condition.
2) Wiper switch and knob
3) Headlight switch and knob
4) Gas cap
5) Wiper transmission arms, screws, clips
6) Gauge cluster

Thanks
Jim

**JimH2828** · 08-08-2013, 12:45 PM

I'll take the below items if you can price the pile well.

1) Oil pressure line and firewall grommet, if it's in reusable condition.
2) Wiper switch and knob
3) Headlight switch and knob
4) Gas cap
5) Wiper transmission arms, screws, clips
6) Gauge cluster

Thanks
Jim

budnikguy · 08-08-2013, 03:02 PM

Can you explain exactly what you mean in the #5 line!? Do you need wiper motor, arms, everything? LMK...thanks

Adam

Quote:

Originally Posted by JimH2828

I'll take the below items if you can price the pile well.

1) Oil pressure line and firewall grommet, if it's in reusable condition.
2) Wiper switch and knob
3) Headlight switch and knob
4) Gas cap
5) Wiper transmission arms, screws, clips
6) Gauge cluster

Thanks
Jim

budnikguy · 08-19-2013, 08:15 PM

Pics of the booster, power steering pump that has bracket and pulley.....

Quote:

Originally Posted by JimH2828

I'll take the below items if you can price the pile well.

1) Oil pressure line and firewall grommet, if it's in reusable condition.
2) Wiper switch and knob
3) Headlight switch and knob
4) Gas cap
5) Wiper transmission arms, screws, clips
6) Gauge cluster

Thanks
Jim

**JimH2828** · 08-08-2013, 04:02 PM

5) The windshield wiper motor has a single bolt that comes through the firewall and out under the cowl, attached to it are the two wiper motor arms (about 14" long each) that and clipped onto the wiper motor bolt and then attached to the sub cowl with two screws on each wiper side. Once it comes through the sub cowl, the actual stainless steel wiper arms\blades attach to it.

Make sense?

Thanks
Jim

budnikguy · 08-08-2013, 06:51 PM

Got ya....I will package it all together...and could do $100 shipped on everything! LMK

Adam

Quote:

Originally Posted by JimH2828

5) The windshield wiper motor has a single bolt that comes through the firewall and out under the cowl, attached to it are the two wiper motor arms (about 14" long each) that and clipped onto the wiper motor bolt and then attached to the sub cowl with two screws on each wiper side. Once it comes through the sub cowl, the actual stainless steel wiper arms\blades attach to it.

Make sense?

Thanks
Jim

**chewysask** · 08-08-2013, 07:33 PM

do you have any rear seat seatbelt brackets?

budnikguy · 08-08-2013, 07:36 PM

I will take a look for you....

Quote:

Originally Posted by chewysask

do you have any rear seat seatbelt brackets?

**LockDoc** · 08-08-2013, 10:22 PM

Adam,

I'm looking for a rear barn door lock pawl and clip as shown in the picture below.

Thanks.
LockDoc

budnikguy · 08-13-2013, 03:45 PM

No seatbelt brackets...sorry

Quote:

Originally Posted by chewysask

do you have any rear seat seatbelt brackets?

Dale99 · 08-09-2013, 09:29 AM

I'm wanting to convert my doors from 72 to 71-pre style. So...
1. Door handle shafts (left and right)
2. window crank assy (left and right)
3. Horns that work?
4. Is that a tilt column? If so, how much

And what date is the california plate?

budnikguy · 08-09-2013, 11:37 AM

I can definitely help you with the conversion, do you need all 3/4 doors for a suburban or just the front two for a truck/blazer? Will check on a working horn...no it is not a tilt column. Plates are early to mid 70's what I believe to be correct for this truck.

Adam

Quote:

Originally Posted by Dale99

I'm wanting to convert my doors from 72 to 71-pre style. So...
1. Door handle shafts (left and right)
2. window crank assy (left and right)
3. Horns that work?
4. Is that a tilt column? If so, how much

And what date is the california plate?

Posted via Mobile Device

Number98 · 08-09-2013, 11:53 AM

Are you going to cut any patches off?

How are these areas?

budnikguy · 08-09-2013, 02:36 PM

Yeah, I am more than willing to do cuts for patch panels, memory serves those area are nice, I will take some detailed pics of the areas you have noted and we can go from there...Do you need the taillight section also? If so, it has been body worked.

Quote:

Originally Posted by Number98

Are you going to cut any patches off?

How are these areas?

Dale99 · 08-09-2013, 01:07 PM

Quote:

Originally Posted by budnikguy

I can definitely help you with the conversion, do you need all 3/4 doors for a suburban or just the front two for a truck/blazer? Will check on a working horn...no it is not a tilt column. Plates are early to mid 70's what I believe to be correct for this truck.

Adam

Posted via Mobile Device

1/2. Just the 2 doors/blazer please.
3. Thanks
4. ok, thanks
up for selling plates?

budnikguy · 08-09-2013, 02:39 PM

I will get them pulled tomorrow and post pics and we go from there...thanks and I will be back to you tomorrow!

Quote:

Originally Posted by Dale99

1/2. Just the 2 doors/blazer please.
3. Thanks
4. ok, thanks
up for selling plates?

Number98 · 08-09-2013, 03:45 PM

I don't really "need" the taillight sections. I might be willing to take the whole quarters if you think we might could just cut them in half (north and south) at the wheel wells then I would have the whole thing. I mainly need the sections ahead of and behind the rear wheel wells.

budnikguy · 08-13-2013, 04:19 PM

Parts and plates pulled...would you like for me to PM you pics?!

Adam

Quote:

Originally Posted by Dale99

1/2. Just the 2 doors/blazer please.
3. Thanks
4. ok, thanks
up for selling plates?

Dale99 · 08-13-2013, 09:54 PM

Quote:

Originally Posted by budnikguy

Parts and plates pulled...would you like for me to PM you pics?!

Adam

Thats fine, or post here, either way. Will need price, and shipped to 72120 home or 72116 biz

**Bgrdmoose** · 08-12-2013, 07:52 PM

Sorry been camping the last 5 days. I'll take it. Pm me Payment info.
-Zack
Posted via Mobile Device

**chewysask** · 08-12-2013, 08:43 PM

Did you find any rear seat seatbelt brackets?

08-07-2013, 10:05 PM	#1
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	1971 GMC Suburban Not a lot here....rear hatch is a pending sale. This will be a complete part out. 1/2 2wd 350/350 5 lug disc brake front, non posi rear I believe 3.08 will double check that. Tailgate $100 GMC Super Custom 1500 emblems $50 Rear Bumper $95 Bumper Brackets $40 all prices plus shipping...ask about anything you may want also...No OE seats, no carpet retainers, no rear interior panels, no headliner

08-07-2013, 11:44 PM	#2
Bgrdmoose Senior Member Join Date: Aug 2012 Location: College Park, MD Posts: 437	Re: 1971 GMC Suburban I'll take the firewall plug above the throttle cable. -Zack Posted via Mobile Device

08-08-2013, 12:45 PM	#6
JimH2828 Senior Member Join Date: Oct 2012 Location: Cumming GA Posts: 621	Re: 1971 GMC Suburban I'll take the below items if you can price the pile well. 1) Oil pressure line and firewall grommet, if it's in reusable condition. 2) Wiper switch and knob 3) Headlight switch and knob 4) Gas cap 5) Wiper transmission arms, screws, clips 6) Gauge cluster Thanks Jim

08-08-2013, 04:02 PM	#9
JimH2828 Senior Member Join Date: Oct 2012 Location: Cumming GA Posts: 621	Re: 1971 GMC Suburban 5) The windshield wiper motor has a single bolt that comes through the firewall and out under the cowl, attached to it are the two wiper motor arms (about 14" long each) that and clipped onto the wiper motor bolt and then attached to the sub cowl with two screws on each wiper side. Once it comes through the sub cowl, the actual stainless steel wiper arms\blades attach to it. Make sense? Thanks Jim

08-08-2013, 07:33 PM	#11
chewysask Active Member Join Date: Apr 2013 Location: Saskatoon, Sask Posts: 193	Re: 1971 GMC Suburban do you have any rear seat seatbelt brackets?

08-08-2013, 12:43 PM	#5
JimH2828 Senior Member Join Date: Oct 2012 Location: Cumming GA Posts: 621	Re: 1971 GMC Suburban I'll take the below items if you can price the pile well. 1) Oil pressure line and firewall grommet, if it's in reusable condition. 2) Wiper switch and knob 3) Headlight switch and knob 4) Gas cap 5) Wiper transmission arms, screws, clips 6) Gauge cluster Thanks Jim

08-08-2013, 10:22 PM	#13
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,824	Re: 1971 GMC Suburban Adam, I'm looking for a rear barn door lock pawl and clip as shown in the picture below. Thanks. LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

08-09-2013, 09:29 AM	#15
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: 1971 GMC Suburban I'm wanting to convert my doors from 72 to 71-pre style. So... 1. Door handle shafts (left and right) 2. window crank assy (left and right) 3. Horns that work? 4. Is that a tilt column? If so, how much And what date is the california plate? __________________ 2008 Sierra k3500 LMM 1994 s10 blazer 4x4 1991 Camaro Vert Rusted in Half RIP 1972 Jimmy 4x4 L05,4L60E,np205http://67-72chevytrucks.com/vboard/s...d.php?t=546364 1967 C10 L6/3tree(dads truck) Last edited by Dale99; 08-09-2013 at 09:35 AM.

08-09-2013, 11:53 AM	#17
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,552	Re: 1971 GMC Suburban Are you going to cut any patches off? How are these areas? Attached Images

08-09-2013, 03:45 PM	#21
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,552	Re: 1971 GMC Suburban I don't really "need" the taillight sections. I might be willing to take the whole quarters if you think we might could just cut them in half (north and south) at the wheel wells then I would have the whole thing. I mainly need the sections ahead of and behind the rear wheel wells.

08-12-2013, 07:52 PM	#24
Bgrdmoose Senior Member Join Date: Aug 2012 Location: College Park, MD Posts: 437	Re: 1971 GMC Suburban Sorry been camping the last 5 days. I'll take it. Pm me Payment info. -Zack Posted via Mobile Device

08-12-2013, 08:43 PM	#25
chewysask Active Member Join Date: Apr 2013 Location: Saskatoon, Sask Posts: 193	Re: 1971 GMC Suburban Did you find any rear seat seatbelt brackets?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.