MI 1970 LWB Frame - Restored - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DaHos** · 08-18-2013, 10:31 AM

If I'm ever going to get my SWB project done I need get get a few things gone....... $2500

Frame is a VERY clean original from AZ. Frame was cleaned, metal prepped and painted w SEM "Rust Shield"

Can be set up for SB 350/350 combo or BB 402/400 combo. Which I have both if interested for extra.

Items included:

Panhard bar bushings
Trailing arm bushings

Rear - 3.73 open

New Moog var. rate Coil springs
new axle seals
new outer axle bearings
new brake shoes
new brake hardware kit
new brake e-brake hardware
new wheel cylinders
new diff cover gasket
diff fluid

Front - 71/72 Disc

new Moog coil springs
71/72 Spindles
new calipers
new brake pads
new soft brake lines
new inner bearings
new outer bearings
new disc seals
new rotors
new upper ball joints
new lower ball joints
new upper control arm bushings
new lower control arm bushings

Steering -

72 Saginaw PS box
new inner tie rods
new outer tie rods
new tie rod sleeves
new idler arm
new pitman arm
Sway bar w new bushings and brackets

Bilstien Shocks, Ebarke cables and all lines are now installed...

**TBONE1964** · 08-18-2013, 10:40 AM

FYI, I have seen this frame in person and I can tell you, you will not get what Dave has here for less cash. It is a very good deal and is very nice. If I was planning a frame off on a long bed truck, I would start with this frame.

STOCKISH · 08-18-2013, 10:51 AM

Or if needed, someone could cut it and be MILES ahead on their shortbed build. Bump for an amazing deal.

**DaHos** · 08-18-2013, 12:07 PM

Pics2 :

**DaHos** · 08-23-2013, 10:18 AM

To da top for a most awsome deal........
Posted via Mobile Device

nobolt · 08-23-2013, 06:27 PM

been there...it's as advertised....a great deal for someone!

Dave, your garage looks empty! did you sell those cabs?

curt2009 · 09-03-2013, 10:42 PM

Hey do you still have the long bed frame
Posted via Mobile Device

**DaHos** · 09-04-2013, 05:41 AM

Quote:

Originally Posted by nobolt

been there...it's as advertised....a great deal for someone!

Dave, your garage looks empty! did you sell those cabs?

Thx Dave, the garage, its just an allusion.... those cabs are going nowhere !!!!!! (but maybe onto a frame one of these days)

Quote:

Originally Posted by curt2009

Hey do you still have the long bed frame
Posted via Mobile Device

Yup still here.....

**DaHos** · 09-03-2015, 07:01 AM

Well this was sold and has been sitting in a shop untouched since, I was contacted by the owner to buy it back........Anyone interested? this thing is CLEAN !!!

CST Guy · 09-03-2015, 12:13 PM

What would be the best way to get in touch with the present owner?

**michael bustamante** · 09-03-2015, 12:39 PM

its amazing how much money we can put JUST into a rolling chassis! how much is the current owner asking?

CST Guy · 09-03-2015, 01:22 PM

Quote:

Originally Posted by michael bustamante

its amazing how much money we can put JUST into a rolling chassis! how much is the current owner asking?

Agreed, putting a punch list together now, quite an expense to do it correctly.
DaHos, could you P.M. me current status and price when you get a chance? thanks, John

**DaHos** · 09-03-2015, 12:50 PM

I will be picking it up this weekend. I have adjusted the price above for the added items.

nobolt · 09-03-2015, 06:15 PM

at least you had some open floor space for a couple of years!
good luck with your sale

**DaHos** · 12-26-2015, 09:54 PM

Price drop to $2000

DeepOceanStepside · 12-26-2015, 10:00 PM

This would be great if I was further ahead with the new medium olive patina truck

**DaHos** · 12-26-2015, 10:10 PM

Quote:

Originally Posted by DeepOceanStepside

This would be great if I was further ahead with the new medium olive patina truck

Just think of it as a dollie........

**zicc1835** · 12-27-2015, 11:35 AM

r those rear rollers still on the frame if your willing to sell them with some more info id be interested in those rims

**truckdude239** · 12-27-2015, 03:33 PM

if i only had the money....

**DaHos** · 12-28-2015, 09:12 AM

Quote:

Originally Posted by zicc1835

r those rear rollers still on the frame if your willing to sell them with some more info id be interested in those rims

They are available...NO tires...Widened stock steelies, 15 x 9.5. 5 lug w 4" back space. They have been blasted and powdercoated white. Have not been mounted since. $300 pr plus shipping.

Quote:

Originally Posted by truckdude239

if i only had the money....

So do I.....

**zicc1835** · 12-28-2015, 11:01 AM

Quote:

Originally Posted by DaHos

They are available...NO tires...Widened stock steelies, 15 x 9.5. 5 lug w 4" back space. They have been blasted and powdercoated white. Have not been mounted since. $300 pr plus shipping.

So do I.....

thanks for the response nice wheels ill pass im not wanting the white powder coating
jz

**Chevy Fan Always** · 12-28-2015, 03:06 PM

The frame is still available, correct?

**DaHos** · 12-28-2015, 03:14 PM

Quote:

Originally Posted by Chevy Fan Always

The frame is still available, correct?

Correct, it is available. .

**DaHos** · 04-15-2016, 09:24 AM

One more time or she's going to become a short...........Ba-ump !

**Chevy Fan Always** · 04-15-2016, 09:44 AM

Would you entertain an offer, I bring my own wheels and tires?

08-18-2013, 10:31 AM	#1
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,859	1970 LWB Frame - Restored If I'm ever going to get my SWB project done I need get get a few things gone....... $2500 Frame is a VERY clean original from AZ. Frame was cleaned, metal prepped and painted w SEM "Rust Shield" Can be set up for SB 350/350 combo or BB 402/400 combo. Which I have both if interested for extra. Items included: Panhard bar bushings Trailing arm bushings Rear - 3.73 open New Moog var. rate Coil springs new axle seals new outer axle bearings new brake shoes new brake hardware kit new brake e-brake hardware new wheel cylinders new diff cover gasket diff fluid Front - 71/72 Disc new Moog coil springs 71/72 Spindles new calipers new brake pads new soft brake lines new inner bearings new outer bearings new disc seals new rotors new upper ball joints new lower ball joints new upper control arm bushings new lower control arm bushings Steering - 72 Saginaw PS box new inner tie rods new outer tie rods new tie rod sleeves new idler arm new pitman arm Sway bar w new bushings and brackets Bilstien Shocks, Ebarke cables and all lines are now installed... Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations Last edited by DaHos; 09-03-2015 at 07:03 AM.

08-18-2013, 10:40 AM	#2
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: 1970 LWB Frame - Restored FYI, I have seen this frame in person and I can tell you, you will not get what Dave has here for less cash. It is a very good deal and is very nice. If I was planning a frame off on a long bed truck, I would start with this frame.

08-18-2013, 10:51 AM	#3
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 1970 LWB Frame - Restored Or if needed, someone could cut it and be MILES ahead on their shortbed build. Bump for an amazing deal. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

08-18-2013, 12:07 PM	#4
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,859	Re: 1970 LWB Frame - Restored Pics2 : Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

08-23-2013, 10:18 AM	#5
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,859	Re: 1970 LWB Frame - Restored To da top for a most awsome deal........ Posted via Mobile Device __________________ 1967 C10 SWB Owner - Rustbelt Restorations

08-23-2013, 06:27 PM	#6
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: 1970 LWB Frame - Restored been there...it's as advertised....a great deal for someone! Dave, your garage looks empty! did you sell those cabs? __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

09-03-2013, 10:42 PM	#7
curt2009 Registered User Join Date: Apr 2009 Location: greeley colorado Posts: 20	Re: 1970 LWB Frame - Restored Hey do you still have the long bed frame Posted via Mobile Device

09-03-2015, 07:01 AM	#9
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,859	Re: 1970 LWB Frame - Restored Well this was sold and has been sitting in a shop untouched since, I was contacted by the owner to buy it back........Anyone interested? this thing is CLEAN !!! __________________ 1967 C10 SWB Owner - Rustbelt Restorations

09-03-2015, 12:13 PM	#10
CST Guy Registered User Join Date: Sep 2013 Location: Queensbury Posts: 4	Re: 1970 LWB Frame - Restored What would be the best way to get in touch with the present owner?

09-03-2015, 12:39 PM	#11
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: 1970 LWB Frame - Restored its amazing how much money we can put JUST into a rolling chassis! how much is the current owner asking? __________________ 1967custom

09-03-2015, 12:50 PM	#13
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,859	Re: 1970 LWB Frame - Restored I will be picking it up this weekend. I have adjusted the price above for the added items. __________________ 1967 C10 SWB Owner - Rustbelt Restorations

09-03-2015, 06:15 PM	#14
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: 1970 LWB Frame - Restored at least you had some open floor space for a couple of years! good luck with your sale __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

12-26-2015, 09:54 PM	#15
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,859	Re: 1970 LWB Frame - Restored Price drop to $2000 __________________ 1967 C10 SWB Owner - Rustbelt Restorations

12-26-2015, 10:00 PM	#16
DeepOceanStepside Registered User Join Date: Sep 2015 Location: Saginaw, MI Posts: 139	Re: 1970 LWB Frame - Restored This would be great if I was further ahead with the new medium olive patina truck __________________ 1970 Base Step Side Dark Olive 250 3ott restoration 1972 k5 4x4 250 3ott project 1970 long bed light olive 283 th350 driver SOLD

12-27-2015, 11:35 AM	#18
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,298	Re: 1970 LWB Frame - Restored r those rear rollers still on the frame if your willing to sell them with some more info id be interested in those rims __________________ Grand Theft Auto https://67-72chevytrucks.com/vboard/...d.php?t=855961 Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557



Register or Log In To remove these advertisements.

12-27-2015, 03:33 PM	#19
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: 1970 LWB Frame - Restored if i only had the money.... __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

12-28-2015, 03:06 PM	#22
Chevy Fan Always Registered User Join Date: May 2015 Location: Ashland, Ohio Posts: 579	Re: 1970 LWB Frame - Restored The frame is still available, correct?

04-15-2016, 09:24 AM	#24
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,859	Re: 1970 LWB Frame - Restored One more time or she's going to become a short...........Ba-ump ! __________________ 1967 C10 SWB Owner - Rustbelt Restorations

04-15-2016, 09:44 AM	#25
Chevy Fan Always Registered User Join Date: May 2015 Location: Ashland, Ohio Posts: 579	Re: 1970 LWB Frame - Restored Would you entertain an offer, I bring my own wheels and tires?

Register or Log In To remove these advertisements.