Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
08-28-2013, 12:47 AM | #1 |
Registered User
Join Date: Oct 2005
Location: North Idaho
Posts: 335
|
94 Fan Blower upgrade w/part #
Okay, after reading the recent thread about "better AC in 20 minutes" I finally ordered a new fan blower from a '94 Chevy Pickup for my 1980 Silverado Suburban with A/C. I purchased the new fan from NAPA and the part number I bought was 655-1744. Please let me know if anyone disagrees with this selection or if you know of a better one.
Being an engineer, I made some actual before and after measurements using a Kestrel 4000 anemometer. Prior to installing the new blower, I measured approx. 1200 fpm (feet per minute) of airflow coming from the center vent with the fan set on it's highest level and the A/C set to "MAX". I say approximately because the value did vary by as much as 35 fpm as I was holding the instrument. The attached picture shows an actual reading, including the temperature of the air blowing from the vent. After replacing my old blower, which I am absolutely certain was the original blower from 1980, I did measure higher flows coming from the center vent on the order of ~1350 fpm which represents a 12% increase in volume. There was no measurable difference in temperature however. If I had not measured the difference, I am not certain I would have been able to physically detect any change, which makes me suspect perhaps I didn't buy the correct new blower. But given the low cost and ease of changing the blowers, I still think it was well worth the time and money for even a 10% increase. From what I've read after searching older threads, many others have reported a much greater change after making the swap. I think one explanation is that undoubtedly the blower in some folk's trucks have aged worse than others. Overall, I'd heartily recommend making the swap. Even if you don't detect a great change, it is probably there and working to your benefit. |
08-28-2013, 10:01 AM | #2 |
Registered User
Join Date: Apr 2013
Location: homestead florida
Posts: 312
|
Re: 94 Fan Blower upgrade w/part #
I thought u had to get from 96 and up blower
|
08-28-2013, 10:30 AM | #3 |
Registered User
Join Date: Feb 2008
Location: Houston
Posts: 970
|
Re: 94 Fan Blower upgrade w/part #
Ive always seen this upgrade. nice to have some numbers to benchmark with.
__________________
2014 LTZ Z71 Silverado 82 C15 LQ4/4L80E Conversion 78 Suburban build (SOLD) 83 4x4 Suburban(SOLD) 82 C15 (my first truck) |
08-28-2013, 11:20 AM | #4 |
Registered User
Join Date: Jul 2012
Location: Des Moines IA
Posts: 1,250
|
Re: 94 Fan Blower upgrade w/part #
This thread shows "PM129" as the part number, but they also referenced a '94 Chevy as well, so perhaps a part number cross reference? http://67-72chevytrucks.com/vboard/s....php?p=4742848
__________________
- 1981 Sierra 454, NV4500 swap - 2006 Z06, 25k miles - 1973 Nova - Project CarNova Virus on Youtube |
Bookmarks |
|
|