header ??????????? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kevhill85 · 07-06-2003, 10:03 PM

what header fit r trucks . i want a shorty header . my truck is drop 4/5 . i know a f-body fits but not sure what years . i want to go buy a set this weekend unless someone has set for sale .

TIMSPEED · 07-06-2003, 10:11 PM

Actually, it's a G body header, not an F-body header. I'll let someone else chime in here, who actually has that Header. (Ryan, or someone else...)

kevhill85 · 07-06-2003, 10:12 PM

ok thanks . that why i wanted to check before i order lol

gchemist · 07-06-2003, 10:21 PM

The shorty header you are looking for is for a SB Chevelle. 64-87 shorty if I remember correctly.

SCOTI · 07-07-2003, 05:22 PM

A 3/4 length header for chevelles fits between & doesn't hang below truck framerails. Big blocks are the same as well (I'm using Sanderson BB3's, which are 3/4 length for Chevelles).

These will be better than manifolds, but will fall short of full equal length headers for the guy searching for max performance.

apstguy · 07-08-2003, 04:22 PM

Edlebrock started making shorty headers for our trucks recently.

78chevstepside · 07-08-2003, 04:56 PM

i have a 4 /6 drop on my 78 with full lenghth hedmen headers . no problem with clearance. Well you want to slow down on speed bumps.

SCOTI · 07-08-2003, 05:03 PM

Get some pics of those full length headmans in relation to the bottom of the frame rail.

78chevstepside · 07-09-2003, 06:01 PM

With a 4/6 drop 4" in the front i got 4" of ground clearance with full length headers. The top of the collector sits right with the bottom of the framerail. I also have collector flange stiffners for added support(( for grounding out and sealing). I recomend flange stiffners and alumunuim gaskets . I also like a crossover h -pipe with flanges for easy tranny and exhaust removel ( balances flow and improves lowend torque). hedmen headers are usually the cheapest on the market. I never had a problem with them.

jay

C&C Chevy · 07-09-2003, 06:14 PM

Scoti, can you get some pics of those headers.

kevhill85 · 07-09-2003, 08:13 PM

i have a h-pipe in it now . 3" exh with flows on it

SCOTI · 07-09-2003, 11:19 PM

I'll try & bring the digi cam home tomorrow. There's no freakin' way full length's would fit under my crap. The bottom of the header better be even w/the bottom of my framerail or it will be a quick, certain death.

What do you guys . . .... oh never mind, I'll start a new thread.

low 84 · 07-09-2003, 11:41 PM

kevin if you have a jegs catalogue, look at the dynomax ceramic coated headers, then look at part number 289-86118, this is the shorty myslef and others are using, it fits perfiect.

C&C Chevy · 07-10-2003, 06:15 PM

Could someone please post some pics of the Chevelle headers in our trucks?

Summit has them for $230.

kevhill85 · 07-10-2003, 07:49 PM

thanks man . i was hoping u would Q in . it the 64-87 chevelle ,67-81 camaro sbc shorty 229.99 .. i'll order some tonight . how r the seats

low 84 · 07-12-2003, 12:46 AM

the seats are great man, i love em

c&c here is a pic of the chevelle shorties on my old motor

kevhill85 · 07-12-2003, 08:36 AM

thanks again man . u going to the show today in deton

**Captkaos** · 07-15-2003, 12:04 PM

SCOTI, I have the Sanderson Headers for my BBC too. http://www.captkaoscustoms.com/images/sandersonhdrs.jpg

SCOTI · 07-15-2003, 12:47 PM

Pretty. Mine are just bare since they don't recommend them to be coated during initial engine start-up. I'll get them coated eventually.

**Captkaos** · 07-15-2003, 12:51 PM

I have a spare set of "break-in" headers for that.

07-06-2003, 10:03 PM	#1
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	header ??????????? what header fit r trucks . i want a shorty header . my truck is drop 4/5 . i know a f-body fits but not sure what years . i want to go buy a set this weekend unless someone has set for sale . __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

07-06-2003, 10:11 PM	#2
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Actually, it's a G body header, not an F-body header. I'll let someone else chime in here, who actually has that Header. (Ryan, or someone else...) __________________ I have a few cars... See Them Here

07-06-2003, 10:12 PM	#3
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	ok thanks . that why i wanted to check before i order lol __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

07-06-2003, 10:21 PM	#4
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	The shorty header you are looking for is for a SB Chevelle. 64-87 shorty if I remember correctly. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

07-07-2003, 05:22 PM	#5
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,963	A 3/4 length header for chevelles fits between & doesn't hang below truck framerails. Big blocks are the same as well (I'm using Sanderson BB3's, which are 3/4 length for Chevelles). These will be better than manifolds, but will fall short of full equal length headers for the guy searching for max performance. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 07-07-2003 at 05:25 PM.

07-08-2003, 04:22 PM	#6
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,088	Edlebrock started making shorty headers for our trucks recently. __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

07-08-2003, 04:56 PM	#7
78chevstepside Registered User Join Date: Nov 2002 Location: lacenter, washington Posts: 718	i have a 4 /6 drop on my 78 with full lenghth hedmen headers . no problem with clearance. Well you want to slow down on speed bumps.

07-08-2003, 05:03 PM	#8
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,963	Get some pics of those full length headmans in relation to the bottom of the frame rail. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-09-2003, 06:01 PM	#9
78chevstepside Registered User Join Date: Nov 2002 Location: lacenter, washington Posts: 718	With a 4/6 drop 4" in the front i got 4" of ground clearance with full length headers. The top of the collector sits right with the bottom of the framerail. I also have collector flange stiffners for added support(( for grounding out and sealing). I recomend flange stiffners and alumunuim gaskets . I also like a crossover h -pipe with flanges for easy tranny and exhaust removel ( balances flow and improves lowend torque). hedmen headers are usually the cheapest on the market. I never had a problem with them. jay

07-09-2003, 06:14 PM	#10
C&C Chevy Registered User Join Date: Feb 2003 Location: Midwest City, OK Posts: 1,001	Scoti, can you get some pics of those headers. __________________ Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007

07-09-2003, 08:13 PM	#11
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	i have a h-pipe in it now . 3" exh with flows on it __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

07-09-2003, 11:19 PM	#12
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,963	I'll try & bring the digi cam home tomorrow. There's no freakin' way full length's would fit under my crap. The bottom of the header better be even w/the bottom of my framerail or it will be a quick, certain death. What do you guys . . .... oh never mind, I'll start a new thread. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-09-2003, 11:41 PM	#13
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	kevin if you have a jegs catalogue, look at the dynomax ceramic coated headers, then look at part number 289-86118, this is the shorty myslef and others are using, it fits perfiect. __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

07-10-2003, 06:15 PM	#14
C&C Chevy Registered User Join Date: Feb 2003 Location: Midwest City, OK Posts: 1,001	Could someone please post some pics of the Chevelle headers in our trucks? Summit has them for $230. __________________ Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007

07-10-2003, 07:49 PM	#15
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	thanks man . i was hoping u would Q in . it the 64-87 chevelle ,67-81 camaro sbc shorty 229.99 .. i'll order some tonight . how r the seats __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet



Register or Log In To remove these advertisements.

07-12-2003, 12:46 AM	#16
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	the seats are great man, i love em c&c here is a pic of the chevelle shorties on my old motor __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

07-12-2003, 08:36 AM	#17
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	thanks again man . u going to the show today in deton __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

07-15-2003, 12:04 PM	#18
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	SCOTI, I have the Sanderson Headers for my BBC too. http://www.captkaoscustoms.com/images/sandersonhdrs.jpg __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

07-15-2003, 12:47 PM	#19
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,963	Pretty. Mine are just bare since they don't recommend them to be coated during initial engine start-up. I'll get them coated eventually. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-15-2003, 12:51 PM	#20
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	I have a spare set of "break-in" headers for that. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

Register or Log In To remove these advertisements.