|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
09-04-2013, 02:37 PM
|
#1 |
|
Registered User
Join Date: Dec 2011
Location: Belgium
Posts: 82
|
position inner fender to cab mount bracket
Working on a Chevy '56 Stepside...
I was just looking at the position of the inner fender bracket on the driver side... I welded in a new floorpanel in that area. I'm pretty sure, I took the measurements of the old board, to drill the 2 holes ... but when I compare the driver to the passenger side, I have the impresion the driver side is way off ... Is there anybody, who could measure the position of these 2 holes ? As a reference I took the ribs left and right :  on the left I have a hair less then 1", and on the right 2" 15/16 ... many thanks in advance ... |
|
|
|
09-04-2013, 02:54 PM
|
#2 |
|
Registered User
Join Date: Aug 2011
Location: Tucson, AZ
Posts: 917
|
Re: position inner fender to cab mount bracket
Those brackets are identical, so they go on opposite of each other side to side. Bracket and holes outside of the inner fender on the PS(looks good), bracket and holes on the inside of the inner fender on the DS(looks not so good) I tried to make them the same but decided it was way too much work for what I would accommplish. I would wager your holes are correct. Some bean counter saved a nickel on that deal and that's what we got.....that is if I assembled mine correctly. It came in pieces so i never really knew.
|
|
|
|
|
09-04-2013, 11:38 PM
|
#3 |
|
Registered User
Join Date: Feb 2010
Location: San Angelo, Tx
Posts: 1,068
|
Re: position inner fender to cab mount bracket
 
|
|
|
|
|
09-06-2013, 04:58 PM
|
#4 |
|
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,680
|
Re: position inner fender to cab mount bracket
like speedbump said... they both are orientated the same way.
L L not mirrored like you'd think, i installed them mirrored. won't work 
__________________
cool, an ogre smiley Ogre's 58 Truk buildhow to put your truck year and build thread into your signature shop air compressor timer |
|
|
|
|
09-07-2013, 05:30 AM
|
#5 |
|
Registered User
Join Date: Dec 2011
Location: Belgium
Posts: 82
|
Re: position inner fender to cab mount bracket
@Roger55 : thx for the photo's ... looks like I drilled mine on the spot ...
@Speedbump & _Ogre : thx for the confirmation ! |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
