KY Pressed Steel Model Trucks: 1969 Stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**hooverfish** · 09-09-2013, 09:45 PM

I have a set of 4 steel model trucks that I am selling. They are made by KJ and are large, heavy duty trucks. They each represent one of 4 assembly plants: Atlanta, Flint, St Louis, and Fremont Ca. All are dark blue paint.
They are 14 inches long and weigh about 2 - 3 lbs each. Graphics are pad printed (not decals), bumper & correct full size hubcaps are chrome plated steel (not plastic). I am asking $40 each and $12 shipping to lower 48. These are brand new and still in original boxes. Approximate size is 1:18 scale. Also, tailgate opens, rubber tires, etc. I like the little 'C 10' on the front fender.

**DREW67** · 09-09-2013, 09:53 PM

Do they have glass?

**Ironhorse** · 09-09-2013, 09:57 PM

Also interested. As DREW67 asked, do they have glass? VERY interested in the St. Louis truck model if affirmative on glass.

**hooverfish** · 09-09-2013, 10:33 PM

No glass .........

**special-K** · 09-10-2013, 06:00 AM

This is a great offering. These came out in '99 and these four are the only plants produced...this is a complete set for $160! Not bad,as that's what they sold for when available (& not just anywhere). They were hard to find from the get-go. I have a set or I'd be on these. The quality is equal to Tonkas made in the '50s.

**hooverfish** · 09-10-2013, 10:16 AM

Quote:

Originally Posted by special-K

This is a great offering. These came out in '99 and these four are the only plants produced...this is a complete set for $160! Mot bad,as that's what they sold for when available (& not just anywhere). They were hard to find from the get-go. I have a set or I'd be on these. The quality is equal to Tonkas made in the '50s.

Special-K, thanks for your comments.

Littletony · 09-10-2013, 06:20 AM

I will take them, pm me how you would like to be paid.
Posted via Mobile Device

**hooverfish** · 09-10-2013, 10:22 AM

Quote:

Originally Posted by Littletony

I will take them, pm me how you would like to be paid.
Posted via Mobile Device

Littletony, thanks ! But I do have one model truck already promised. You can take your pick of the 3 remaining (if you still want them). I intended the shipping charge of $12 for one truck so I will ship you the 3 trucks you want for $20 total shipping.
So let me know which of the 3 assembly plant trucks you prefer for $140 shipped, if that is acceptable to you I will PM the payment info.

Littletony · 09-10-2013, 10:36 AM

I really would like to have all four so I have the complete set. But I guess I will take the Alt, flint and St. Louis trucks.
Posted via Mobile Device

GobbleStalker · 09-10-2013, 10:46 AM

I would love one if available.

Littletony · 09-10-2013, 04:06 PM

Payment sent
Posted via Mobile Device

**hooverfish** · 09-10-2013, 05:35 PM

Trucks are sold, thanks.

Littletony · 09-13-2013, 05:13 PM

Trucks arrived today sir, they are beautiful. Thank you very much.
Posted via Mobile Device

09-09-2013, 09:45 PM	#1
hooverfish Senior Member Join Date: Oct 2012 Location: Lexington, Ky Posts: 2,147	Pressed Steel Model Trucks: 1969 Stepside I have a set of 4 steel model trucks that I am selling. They are made by KJ and are large, heavy duty trucks. They each represent one of 4 assembly plants: Atlanta, Flint, St Louis, and Fremont Ca. All are dark blue paint. They are 14 inches long and weigh about 2 - 3 lbs each. Graphics are pad printed (not decals), bumper & correct full size hubcaps are chrome plated steel (not plastic). I am asking $40 each and $12 shipping to lower 48. These are brand new and still in original boxes. Approximate size is 1:18 scale. Also, tailgate opens, rubber tires, etc. I like the little 'C 10' on the front fender. Attached Images __________________ Larry 84 Chevy SWB, "Roy", dark blue OG paint, 5.7 LS1, 4L60, Vintage Air, 96k miles. "It's a sorry man who can't find his wife a good job"

09-09-2013, 09:53 PM	#2
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,031	Re: Pressed Steel Model Trucks: 1969 Stepside Do they have glass? __________________ DREW67

09-09-2013, 09:57 PM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: Pressed Steel Model Trucks: 1969 Stepside Also interested. As DREW67 asked, do they have glass? VERY interested in the St. Louis truck model if affirmative on glass. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

09-09-2013, 10:33 PM	#4
hooverfish Senior Member Join Date: Oct 2012 Location: Lexington, Ky Posts: 2,147	Re: Pressed Steel Model Trucks: 1969 Stepside No glass ......... __________________ Larry 84 Chevy SWB, "Roy", dark blue OG paint, 5.7 LS1, 4L60, Vintage Air, 96k miles. "It's a sorry man who can't find his wife a good job"

09-10-2013, 06:00 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Pressed Steel Model Trucks: 1969 Stepside This is a great offering. These came out in '99 and these four are the only plants produced...this is a complete set for $160! Not bad,as that's what they sold for when available (& not just anywhere). They were hard to find from the get-go. I have a set or I'd be on these. The quality is equal to Tonkas made in the '50s. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 09-10-2013 at 07:39 PM.

09-10-2013, 06:20 AM	#7
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Pressed Steel Model Trucks: 1969 Stepside I will take them, pm me how you would like to be paid. Posted via Mobile Device __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

09-10-2013, 10:36 AM	#9
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Pressed Steel Model Trucks: 1969 Stepside I really would like to have all four so I have the complete set. But I guess I will take the Alt, flint and St. Louis trucks. Posted via Mobile Device __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

09-10-2013, 10:46 AM	#10
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Pressed Steel Model Trucks: 1969 Stepside I would love one if available. __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

09-10-2013, 04:06 PM	#11
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Pressed Steel Model Trucks: 1969 Stepside Payment sent Posted via Mobile Device __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

09-10-2013, 05:35 PM	#12
hooverfish Senior Member Join Date: Oct 2012 Location: Lexington, Ky Posts: 2,147	Re: Pressed Steel Model Trucks: 1969 Stepside Trucks are sold, thanks. __________________ Larry 84 Chevy SWB, "Roy", dark blue OG paint, 5.7 LS1, 4L60, Vintage Air, 96k miles. "It's a sorry man who can't find his wife a good job"

09-13-2013, 05:13 PM	#13
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Pressed Steel Model Trucks: 1969 Stepside Trucks arrived today sir, they are beautiful. Thank you very much. Posted via Mobile Device __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.