WA Clutch Fan-SB-Restored - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**PICKMUP** · 09-10-2013, 05:00 PM

Cleaned, blasted, painted OEM SB correct thermal fan. All water pumps have two bolt patterns. This is the smaller one. Included is the matching pulley. Should be OEM correct for earlier motors like 68 back. Works fine with later engines with single pulley and it is the right size for SB fan shrouds.
$60 + $15 S/H lower US.

Also have two new USA-made thermal clutches, like the one in the pics, for use on fans with this small pattern---$40 + $10 S/H. Call for them on here. thanks, frank

**PICKMUP** · 01-15-2014, 05:43 PM

Still got this one left! Very nice and it comes with the matching WP pulley.
$75 shipped in CONUS.

**PICKMUP** · 01-16-2014, 02:20 PM

This is the "correct" GM truck fan for our SBs. It is not some other car, wrong year, etc... that might fit.

**PICKMUP** · 04-24-2014, 01:57 PM

...and can sell the fan (less pulley) & clutch for $60 shipped...

allons · 04-24-2014, 05:03 PM

Will this fit a 350 RamJet motor . . . . with the long neck water pump and single pulley for the alternator?

**PICKMUP** · 04-25-2014, 12:17 AM

Quote:

Originally Posted by allons

Will this fit a 350 RamJet motor . . . . with the long neck water pump and single pulley for the alternator?

I don't have a clue...fits stock 283s &327s and others with the small bolt pattern.

Baker819 · 04-30-2014, 11:35 PM

I don't know to much about the fans. Didn't they make a heavy duty model? I have a 350 and want to do some towing? If you don't know I guess I will have to ask around, my trucks almost back on the road and I need one.

**PICKMUP** · 05-01-2014, 01:50 PM

Quote:

Originally Posted by Baker819

I don't know to much about the fans. Didn't they make a heavy duty model? I have a 350 and want to do some towing? If you don't know I guess I will have to ask around, my trucks almost back on the road and I need one.

The HD/AC fans were 7-blade...

**FirstOwner69** · 05-02-2014, 12:04 AM

Quote:

Originally Posted by PICKMUP

The HD/AC fans were 7-blade...

That seems to be the general consensus on this forum. However, not all of them were 7 blade. At least one, my 69 3/4 350 with factory A/C and 4 row radiator, came new with a 5 blade clutch fan. It has never been replaced. I don't know if mine was a fluke or if the chance to 7 blade fans was later than my early December,1968, build.

kev2809 · 05-01-2014, 08:29 PM

the usa made fans are with a clutch..or is just a fan?

im looking for something to replace my flex a lite fan. my shroud from lmc measures about 19" i think... let me know thanks

**PICKMUP** · 05-01-2014, 08:38 PM

Quote:

Originally Posted by kev2809

the usa made fans are with a clutch..or is just a fan?

im looking for something to replace my flex a lite fan. my shroud from lmc measures about 19" i think... let me know thanks

I have new "thermal clutches" (without the fans). That is why they are much cheaper than the one shown. I corrected the wording to make it clearer. thanks, frank

kev2809 · 05-01-2014, 08:40 PM

can you measure the from blade to blade? i need to see if this will fit

**PICKMUP** · 05-02-2014, 11:19 AM

Quote:

Originally Posted by kev2809

can you measure the from blade to blade? i need to see if this will fit

The fan is 17"................................................

Baker819 · 05-01-2014, 08:57 PM

Okay thank you for the information. I will pass on it

**PICKMUP** · 07-29-2014, 02:50 PM

SOLD the fan...
Two new clutches are still available for early ('68 & older) fans.

09-10-2013, 05:00 PM	#1
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Clutch Fan-SB-Restored Cleaned, blasted, painted OEM SB correct thermal fan. All water pumps have two bolt patterns. This is the smaller one. Included is the matching pulley. Should be OEM correct for earlier motors like 68 back. Works fine with later engines with single pulley and it is the right size for SB fan shrouds. $60 + $15 S/H lower US. Also have two new USA-made thermal clutches, like the one in the pics, for use on fans with this small pattern---$40 + $10 S/H. Call for them on here. thanks, frank Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170 Last edited by PICKMUP; 05-01-2014 at 08:35 PM.

01-15-2014, 05:43 PM	#2
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: Clutch Fan-SB-Restored Still got this one left! Very nice and it comes with the matching WP pulley. $75 shipped in CONUS. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

01-16-2014, 02:20 PM	#3
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: Clutch Fan-SB-Restored This is the "correct" GM truck fan for our SBs. It is not some other car, wrong year, etc... that might fit. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

04-24-2014, 01:57 PM	#4
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: Clutch Fan-SB-Restored ...and can sell the fan (less pulley) & clutch for $60 shipped... __________________ Email: frankeham@comcast.net Phone: 360-956-7170

04-24-2014, 05:03 PM	#5
allons Registered User Join Date: Apr 2013 Location: West Liberty, Ohio Posts: 288	Re: Clutch Fan-SB-Restored Will this fit a 350 RamJet motor . . . . with the long neck water pump and single pulley for the alternator?

04-30-2014, 11:35 PM	#7
Baker819 Registered User Join Date: Oct 2012 Location: WA Posts: 119	Re: Clutch Fan-SB-Restored I don't know to much about the fans. Didn't they make a heavy duty model? I have a 350 and want to do some towing? If you don't know I guess I will have to ask around, my trucks almost back on the road and I need one.

05-01-2014, 08:29 PM	#10
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: Clutch Fan-SB-Restored the usa made fans are with a clutch..or is just a fan? im looking for something to replace my flex a lite fan. my shroud from lmc measures about 19" i think... let me know thanks __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-01-2014, 08:40 PM	#12
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: Clutch Fan-SB-Restored can you measure the from blade to blade? i need to see if this will fit __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-01-2014, 08:57 PM	#14
Baker819 Registered User Join Date: Oct 2012 Location: WA Posts: 119	Re: Clutch Fan-SB-Restored Okay thank you for the information. I will pass on it

07-29-2014, 02:50 PM	#15
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: Clutch Fan-SB-Restored SOLD the fan... Two new clutches are still available for early ('68 & older) fans. __________________ Email: frankeham@comcast.net Phone: 360-956-7170



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.