starter solenoid not working - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gmhardwick66 · 09-25-2013, 04:29 PM

I bought a procomp mini starter only to have it not work properly. alignment is perfect. when starting normally it just clicks, but not your typical starter solenoid click. very faint click. I metered ignition wire and have at least 12.5 volts when turning key. voltage does not drop even if keeping key turned as if starting for a while. battery is new. if I jump solenoid with screwdriver from battery lug to the small ignition wire lug...it works great. its as if the solenoid is not getting enough amperage through the ignition wire to the solenoid. I am going to swap the solenoid out with another one that I just removed from truck. so with that said the truck was running with the basic oem starter/solenoid. is this a wiring problem or just maybe a bad solenoid? I really want to use the mini starter.

cdowns · 09-25-2013, 04:33 PM

i would start by cleaning and tightening all connections including your ground sides involved

just lookin and giving them a harsh stare will do nothing to help

remove clean install and tighten

**slomotion** · 09-25-2013, 05:39 PM

Quote:

Originally Posted by cdowns

i would start by cleaning and tightening all connections including your ground.......

I agree, sounds more like a ground problem than anything else.

gmhardwick66 · 09-25-2013, 07:48 PM

yes Lee I checked voltage on the starter wire [not battery wire] and it maintained 12.5 volts the entire time key was in the cranking position.
is it possible that the solenoid could be sticking or possibly bad?

gmhardwick66 · 09-25-2013, 04:43 PM

I will double check connections tomorrow. like I said I took a working starter off today so it at least good enough connections for the factory starter but anything is possible.

Lee H · 09-25-2013, 05:31 PM

Is the starter wire (not the cable) getting a full 12 volts at the starter during start?

gmhardwick66 · 09-26-2013, 07:34 PM

I found the problem today. it was the solenoid. it would work then not work so I removed the solenoid and bench tested it with some jumper cables from battery to the solenoid . had same results. it would work then stop working all together. will I ever learn ...buying cheap ebay knock off stuff.

Lee H · 09-26-2013, 08:05 PM

Glad to hear you got it figured out.
Posted via Mobile Device

09-25-2013, 04:29 PM	#1
gmhardwick66 Registered User Join Date: Aug 2013 Location: west monroe la. Posts: 68	starter solenoid not working I bought a procomp mini starter only to have it not work properly. alignment is perfect. when starting normally it just clicks, but not your typical starter solenoid click. very faint click. I metered ignition wire and have at least 12.5 volts when turning key. voltage does not drop even if keeping key turned as if starting for a while. battery is new. if I jump solenoid with screwdriver from battery lug to the small ignition wire lug...it works great. its as if the solenoid is not getting enough amperage through the ignition wire to the solenoid. I am going to swap the solenoid out with another one that I just removed from truck. so with that said the truck was running with the basic oem starter/solenoid. is this a wiring problem or just maybe a bad solenoid? I really want to use the mini starter.

09-25-2013, 04:33 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: starter solenoid not working i would start by cleaning and tightening all connections including your ground sides involved just lookin and giving them a harsh stare will do nothing to help remove clean install and tighten __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

09-25-2013, 07:48 PM	#4
gmhardwick66 Registered User Join Date: Aug 2013 Location: west monroe la. Posts: 68	Re: starter solenoid not working yes Lee I checked voltage on the starter wire [not battery wire] and it maintained 12.5 volts the entire time key was in the cranking position. is it possible that the solenoid could be sticking or possibly bad?

09-25-2013, 04:43 PM	#5
gmhardwick66 Registered User Join Date: Aug 2013 Location: west monroe la. Posts: 68	Re: starter solenoid not working I will double check connections tomorrow. like I said I took a working starter off today so it at least good enough connections for the factory starter but anything is possible.

09-25-2013, 05:31 PM	#6
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,147	Re: starter solenoid not working Is the starter wire (not the cable) getting a full 12 volts at the starter during start? __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

09-26-2013, 07:34 PM	#7
gmhardwick66 Registered User Join Date: Aug 2013 Location: west monroe la. Posts: 68	Re: starter solenoid not working I found the problem today. it was the solenoid. it would work then not work so I removed the solenoid and bench tested it with some jumper cables from battery to the solenoid . had same results. it would work then stop working all together. will I ever learn ...buying cheap ebay knock off stuff.

09-26-2013, 08:05 PM	#8
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,147	Re: starter solenoid not working Glad to hear you got it figured out. Posted via Mobile Device __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.