MO 1970 Chevy Custom Going to the Crusher

[am0254338]

This truck is rough in every way, we r pulling drivetrain out and taking it to the crusher. Just wanted to throw it up and see if there's anything anybody wants before we do. We have a plasma cutter so can cut patch panels as well. The chassis 73-87 not original.

[tjmeadows]

Has it got a uncut tail light harness?

[robertnfrappuls]

Is the rear-view mirror intact?

[am0254338]

No. Harness is cut..

Yes Picture Attached

[robertnfrappuls]

Originally Posted by am0254338

No. Harness is cut..

Yes Picture Attached

Thanks, I don't think I need that one.

[Green Hornet]

That one headlight looks like it is in good shape. LOL

Kidding aside, nice of you to offer up what parts are left on it.

[JimH2828]

What about the lower steering shaft w/ coupler, 4x4 steering gear box, 4x4 pitman arm and knuckles?

Thanks
Jim

[am0254338]

Have the shaft but the rag joint is no good...you did see that the chassis is 73-87? Will sell though if u still want...not sure what your calling the knuckle?

[misfit0313]

How about the instrument cluster?

[am0254338]

Ya its there don't know what works and what doesn't.

[misfit0313]

Thanks, not any better than the one I have now. I'll look somewhere else.

[JimH2828]

Can you post some pics?

1) lower steering shaft w/ coupler - mostly interested in the rubber seal and coupler inner parts.
2) 4x4 steering gear box
3) 4x4 pitman arm
4) knuckles - they are the large oddly shaped components that the ball joints attach to at the end to the axils. Wheel lugs go through them. Steering tie rode goes all the way across from one side knuckle to the other knuckle.

Thanks
Jim

[am0254338]

JimH: I will get you some pictures tomorrow.

Thanks,
Andy

[BlueMule72]

If that dually truck rim in the back is a 22.5", please don't crush it, those are very desirable to certain people

[am0254338]

No its not lol...Hope these pictures help

[am0254338]

Sorry just realized a couple were blurry..i was in a really big hurry! lol...Hope u can still see what you need to.

Thanks,
Andy

[JimH2828]

Andy, thanks for the pics.

1) 4x4 pitman arm (comes off bottom of gear box, 6in long 2in wide)
Yup, that's what I need.

2) lower steering shaft w/ coupler
I'll pass, looks like seal is torn

3) 4x4 steering gear box
Right price, I'll take it.

4) knuckles - they are the large oddly shaped components that the ball joints attach to at the end to the axils. Wheel lugs go through them. Steering tie rode goes all the way across from one side knuckle to the other knuckle.
Yup, that's what I need.

5) Brake dust covers, dust plates.
Those look like the good solid think ones. I'm interested, especially since you need to yank those to get to the knuckles.

This is heavy stuff, but we should be able to come to terms if you are willing to do some wrenching.

Give me a call, so we can discuss in more depth.

Thanks
Jim
404-784-0050

[am0254338]

Ok Jim ill give you a call tomorrow whats a good time?